January 2010 Archives by thread
Starting: Fri Jan 1 06:11:39 EST 2010
Ending: Sun Jan 31 22:23:50 EST 2010
Messages: 437
- gEDA-user: teardrop compiling installation,
Bert Timmerman
- gEDA-user: pcb-20091103 photo-mode problem
Lloyd J Strickler
- gEDA-user: pcb title bar always PCB: Unnamed
Lloyd J Strickler
- gEDA-user: teardrop compiling installation,
Vincent Onelli
- gEDA-user: geda-user Digest, Vol 44, Issue 5
vinny
- gEDA-user: Outage coming for geda.seul.org
Ales Hvezda
- gEDA-user: [SOT] suggestion for a SMT switch
Jason
- gEDA-user: [SOT] suggestion for a SMT switch
John Luciani
- gEDA-user: [SOT] suggestion for a SMT switch
Jason
- gEDA-user: [SOT] suggestion for a SMT switch
DJ Delorie
- gEDA-user: [SOT] suggestion for a SMT switch
Bob Paddock
- gEDA-user: CR2032 with supercap, was Re: [SOT] suggestion for a SMT switch
Jason
- gEDA-user: CR2032 with supercap, was Re: [SOT] suggestion for a SMT switch
Bob Paddock
- gEDA-user: CR2032 with supercap, was Re: [SOT] suggestion for a SMT switch
Igor Lopez
- gEDA-user: CR2032 with supercap, was Re: [SOT] suggestion for a SMT switch
Jason
- gEDA-user: CR2032 with supercap, was Re: [SOT] suggestion for a SMT switch
Peter Clifton
- gEDA-user: CR2032 with supercap, was Re: [SOT] suggestion for a SMT switch
John Doty
- gEDA-user: CR2032 with supercap, was Re: [SOT] suggestion for a SMT switch
andrew whyte
- gEDA-user: CR2032 with supercap, was Re: [SOT] suggestion for a SMT switch
Jason
- gEDA-user: CR2032 with supercap, was Re: [SOT] suggestion for a SMT switch
andrew whyte
- gEDA-user: CR2032 with supercap, was Re: [SOT] suggestion for a SMT switch
Jason
- gEDA-user: CR2032 with supercap, was Re: [SOT] suggestion for a SMT switch
Gabriel Paubert
- gEDA-user: CR2032 with supercap, was Re: [SOT] suggestion for a SMT switch
Jason
- gEDA-user: CR2032 with supercap, was Re: [SOT] suggestion for a SMT switch
Mark Rages
- gEDA-user: [SOT] suggestion for a SMT switch
Jason
- gEDA-user: [SOT] suggestion for a SMT switch
Steven Michalske
- gEDA-user: teardrop compiling installation,
vinny
- gEDA-user: blue sky ideas : side-effects on circuit modelling?
Tim Golden
- gEDA-user: Vanishing Detail
Tony Radice
- gEDA-user: blue sky ideas - written down finally
Florian Teply
- gEDA-user: looking to hire a geda expert
jason duhamell
- gEDA-user: PCB line limit of 255 in pcb
Kai-Martin Knaak
- gEDA-user: Net of Selected Common Pins Enroutes Shortest Path Through All Intervening Pins
Stan Katz
- gEDA-user: [igor2 at igor2.repo.hu: Re: Net of Selected Common Pins Enroutes Shortest Path Through All Intervening Pins]
gedau at igor2.repo.hu
- gEDA-user: Problem with square pads without holes and rounded SMD in gerber
Svenn Are Bjerkem
- gEDA-user: teardrop compiling installation
vinny
- gEDA-user: taking issue with Symbol creation
phil
- gEDA-user: Symbol attribute text sizes ...
phil
- gEDA-user: ExecuteFile(bob.cmd) question
gene glick
- gEDA-user: Slots, Swaps and BSDL files
John Eaton
- gEDA-user: What to do with N/C Pins?
research at ottomaneng.com
- gEDA-user: little slivers from pours
David Griffith
- gEDA-user: gschem and spice subcircuits
Ed Martin
- gEDA-user: Bill Wilson's symbols and footprints
David Griffith
- gEDA-user: little slivers
Harry Eaton
- gEDA-user: gnetlist + gspiceui - Paths
Ed Martin
- gEDA-user: tiny slivers
Harry Eaton
- gEDA-user: gaf-git: unicode causes fork bomb in gschem/po
Link
- gEDA-user: Question on the Netlist Field in PCB
Tony Radice
- gEDA-user: log scale DC sweeps in ngspice
asomers at gmail.com
- gEDA-user: OT: DC power feed on xDSL circuits
Michael Sokolov
- gEDA-user: teardrop compiling installation
vinny
- gEDA-user: seul.org service coming back slowely...
Ales Hvezda
- gEDA-user: Gnetlist, spice and probes
Maciej Pijanka
- gEDA-user: OT: DC power feed on xDSL circuits
Michael Sokolov
- gEDA-user: PCB routing pitch
Andrzej
- gEDA-user: New gaf on Windows and one PCB question
Mike Bushroe
- gEDA-user: soldermask clearance
gene glick
- gEDA-user: Can you do thermals on square SMD pads?
dfro at umich.edu
- gEDA-user: Move refdes on the board
uv
- gEDA-user: blackboxing pcb as part
Cyril Hrubis
- gEDA-user: Test gschem bug...
Peter Clifton
- gEDA-user: blackboxing pcb
Harry Eaton
- gEDA-user: Win32 build with native printing support (via Cairo)
Peter Clifton
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
dfro at umich.edu
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
timecop
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Jason
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Bob Paddock
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Windell H. Oskay
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Ben Jackson
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Dave N6NZ
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Dave N6NZ
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Bob Paddock
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Dave N6NZ
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
John Doty
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Bob Paddock
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
John Doty
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Dave N6NZ
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Windell H. Oskay
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
dfro at umich.edu
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Dave N6NZ
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Ben Jackson
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Dave N6NZ
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Ben Jackson
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Dave N6NZ
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Ben Jackson
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Dave N6NZ
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Peter Clifton
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Dave N6NZ
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
dfro at umich.edu
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
dfro at umich.edu
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Dave N6NZ
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
dfro at umich.edu
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
dfro at umich.edu
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
dfro at umich.edu
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Bert Timmerman
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Dave N6NZ
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
dfro at umich.edu
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Bert Timmerman
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
Alberto Maccioni
- gEDA-user: Schematic Capture to dxf File - using gEDA, Inkscape, and pstoedit
dfro at umich.edu
- gEDA-user: Conversion to Manufacturing Data
Tony Radice
- gEDA-user: Win32 hit list...
Peter Clifton
- gEDA-user: Resend - Surface Plane connected part footprints
Tony Radice
- gEDA-user: Resend - Schematic Recommendations
Tony Radice
- gEDA-user: Pick-And-Place Extract
Tony Radice
- gEDA-user: Pick-and-Place Data
Tony Radice
- gEDA-user: How to confusing multiconnection on gschem.
vinny
- gEDA-user: gEDA Arabic Translation.
عبد الله شلي (Abdellah Chelli)
- gEDA-user: Pick-And-Place Extract
Dan McMahill
- gEDA-user: gschem font scaling
Duncan Drennan
- gEDA-user: gschem postscript bug
Donald Tillman
- gEDA-user: gsch2pcb question
vinny
- gEDA-user: Solder Mask Layer
Tony Radice
- gEDA-user: arcs in pcb
Mark Rages
- gEDA-user: Program to generate Step and repeat from Gerbar files
Kipton Moravec
- gEDA-user: PCB LF patch: single "foward annotate" sch->pcb button
DJ Delorie
- gEDA-user: arcs in pcb
Harry Eaton
- gEDA-user: Gerber Editor
Tony Radice
- gEDA-user: Taking advantage of internally connected pins
Ben Jackson
- gEDA-user: Pin pads on only one side
Phil Frost
- gEDA-user: Question on PCB Internals
Tony Radice
- gEDA-user: 64-bit Squirrel
Tony Radice
Last message date:
Sun Jan 31 22:23:50 EST 2010
Archived on: Sun Jan 31 22:22:57 EST 2010
This archive was generated by
Pipermail 0.09 (Mailman edition).