November 2009 Archives by subject
Starting: Sun Nov 1 01:30:00 EDT 2009
Ending: Mon Nov 30 21:26:43 EST 2009
Messages: 754
- gEDA-user: "Analog" books
Karl Hammar
- gEDA-user: "Analog" books
Stuart Brorson
- gEDA-user: "Analog" books
asomers at gmail.com
- gEDA-user: "Analog" books
Gareth Edwards
- gEDA-user: "Analog" books
John Luciani
- gEDA-user: "Analog" books
Andy Fierman
- gEDA-user: "Analog" books
Michael Kaalund
- gEDA-user: "Analog" books
Torsten Wagner
- gEDA-user: "Analog" books
Bill Gatliff
- gEDA-user: "Analog" books
Bob Paddock
- gEDA-user: "Analog" books
Michael Sokolov
- gEDA-user: "Analog" books
Stefan Salewski
- gEDA-user: "Analog" books
Karl Hammar
- gEDA-user: "Analog" books
Andy Fierman
- gEDA-user: "rotatable curvy traces" in pcb
John Griessen
- gEDA-user: "rotatable curvy traces" in pcb
Peter Clifton
- [PATCH 05/12] fix some lines producing typos in pcb.pdf
Ineiev
- [PATCH 07/12] fix refcard.ps orientation
Ineiev
- [PATCH 08/12] fix erratum about sections hierarhy
Ineiev
- [PATCH 09/12] Cleanup RoundRect and SquarePadPoly
Ineiev
- [PATCH] Added ActionSetMaskGap to allow for setting of a solder mask gap for [Selected, all] pins, vias and pads.
Bert Timmerman
- [PATCH] Added ActionSetViasTented to allow for setting the solder mask for vias to be fully tented.
Bert Timmerman
- [PATCH] Change calculation for how many segments to use when drawing curves
Peter Clifton
- [PATCH] Don't immediately redraw rubberband objects after placing
Peter Clifton
- [PATCH] Don't immediately redraw rubberband objects after placing
Peter Clifton
- gEDA-user: [Patch] pcb Added ActionSetMaskGap for setting solder mask gap
Ineiev
- gEDA-user: [Patch] pcb Added ActionSetMaskGap for setting solder mask gap
Bert Timmerman
- gEDA-user: [PCB] Selection of objects
Torsten Wagner
- gEDA-user: [PCB] Selection of objects
Ineiev
- gEDA-user: [PCB] Selection of objects
Kai-Martin Knaak
- gEDA-user: [PCB] Selection of objects
Torsten Wagner
- gEDA-user: [PCB] Selection of objects
Ineiev
- gEDA-user: A component cannot contain another component?
Karl Hammar
- gEDA-user: A component cannot contain another component?
Peter Clifton
- gEDA-user: A component cannot contain another component?
Kai-Martin Knaak
- gEDA-user: A component cannot contain another component?
Peter Clifton
- gEDA-user: A component cannot contain another component?
Kai-Martin Knaak
- gEDA-user: A component cannot contain another component?
Karl Hammar
- gEDA-user: A component cannot contain another component?
Wojciech Kazubski
- gEDA-user: A component cannot contain another component?
John Doty
- gEDA-user: annoying warnings by gsch2pcb
Kai-Martin Knaak
- gEDA-user: annoying warnings by gsch2pcb
Kai-Martin Knaak
- gEDA-user: annoying warnings by gsch2pcb
John Doty
- gEDA-user: annoying warnings by gsch2pcb
Kai-Martin Knaak
- gEDA-user: another wierd idea for a project...
DJ Delorie
- gEDA-user: another wierd idea for a project...
Bob Paddock
- gEDA-user: another wierd idea for a project...
Jasper
- gEDA-user: another wierd idea for a project...
Bob Paddock
- gEDA-user: another wierd idea for a project...
Jasper
- gEDA-user: another wierd idea for a project...
DJ Delorie
- gEDA-user: autogen.sh and automake 1.10.1 does not mix, and make clean insane!!!
Karl Hammar
- gEDA-user: autogen.sh and automake 1.10.1 does not mix,...
Karl Hammar
- gEDA-user: autogen.sh and automake 1.10.1 does not mix,...
Peter TB Brett
- gEDA-user: Best way to search in this list?
Stefan Salewski
- gEDA-user: Black background on pcb
Anthony Shanks
- gEDA-user: Black background on pcb
Stefan Salewski
- gEDA-user: Black background on pcb
Peter Clifton
- gEDA-user: Black background on pcb
Anthony Shanks
- gEDA-user: Black background on pcb
Ben Jackson
- gEDA-user: Black background on pcb
Ineiev
- gEDA-user: Black background on pcb
Anthony Shanks
- gEDA-user: bom fails
gene glick
- gEDA-user: bom fails
DJ Delorie
- gEDA-user: bom fails
gene glick
- gEDA-user: bom fails
Matt Ettus
- gEDA-user: Books about PCB design
Torsten Wagner
- gEDA-user: Books about PCB design
Bob Paddock
- gEDA-user: Books about PCB design
Andy Fierman
- gEDA-user: Books about PCB design
asomers at gmail.com
- gEDA-user: broken if gschem switched to another scripting language, I mean.
John Griessen
- gEDA-user: broken if gschem switched to another scripting language, I mean.
Stefan Salewski
- gEDA-user: Build failure, git repo.
Karl Hammar
- gEDA-user: Build failure, git repo.
Peter TB Brett
- gEDA-user: Build failure, git repo.
Karl Hammar
- gEDA-user: Build failure, git repo.
Peter TB Brett
- gEDA-user: Build failure, git repo.
Karl Hammar
- gEDA-user: Change footprints on finished PCB
Torsten Wagner
- gEDA-user: Change footprints on finished PCB
Gareth Edwards
- gEDA-user: Change footprints on finished PCB
Stefan Salewski
- gEDA-user: Change footprints on finished PCB
Torsten Wagner
- gEDA-user: Change footprints on finished PCB
John Griessen
- gEDA-user: Cheaper right angle component video terminal?
Anthony Shanks
- gEDA-user: Cheaper right angle component video terminal?
Ben Jackson
- gEDA-user: Cheaper right angle component video terminal?
Anthony Shanks
- gEDA-user: Cheaper right angle component video terminal?
Ben Jackson
- gEDA-user: Cheaper right angle component video terminal?
Anthony Shanks
- gEDA-user: Cheaper right angle component video terminal?
John Luciani
- gEDA-user: Cheaper right angle component video terminal?
Ben Jackson
- gEDA-user: Confusing new 1.6 behavior
John Doty
- gEDA-user: Confusing new 1.6 behavior
Stefan Salewski
- gEDA-user: Confusing new 1.6 behavior
Peter Clifton
- gEDA-user: Confusing new 1.6 behavior
Peter Clifton
- gEDA-user: Confusing new 1.6 behavior
John Doty
- gEDA-user: Confusing new 1.6 behavior
Peter Clifton
- gEDA-user: Confusing new 1.6 behavior
Kai-Martin Knaak
- gEDA-user: Confusing new 1.6 behavior
John Doty
- gEDA-user: Confusing new 1.6 behavior
Dan McMahill
- gEDA-user: Confusing new 1.6 behavior
John Doty
- gEDA-user: Do any gEDA users depend on tear-off menus with GTK? (Using gEDA apps)
Kai-Martin Knaak
- gEDA-user: Do any gEDA users depend on tear-off menus with GTK? (Using gEDA apps)
Anthony Shanks
- gEDA-user: Do any gEDA users depend on tear-off menus with GTK? (Using gEDA apps)
Karl Hammar
- gEDA-user: Do any gEDA users depend on tear-off menus with GTK? (Using gEDA apps)
Peter Clifton
- gEDA-user: Do any gEDA users depend on tear-off menus with GTK? (Using gEDA apps)
Peter Clifton
- gEDA-user: Do any gEDA users depend on tear-off menus with GTK? (Using gEDA apps)
Kai-Martin Knaak
- gEDA-user: Do any gEDA users depend on tear-off menus with GTK? (Using gEDA apps)
Peter Clifton
- gEDA-user: Dsub15 HD
Anthony Shanks
- gEDA-user: Dsub15 HD
Bert Timmerman
- gEDA-user: Dsub15 HD
DJ Delorie
- gEDA-user: Dsub15 HD
Anthony Shanks
- gEDA-user: Dsub15 HD
Gabriel Paubert
- gEDA-user: Dsub15 HD
Ineiev
- gEDA-user: Dsub15 HD
Ethan Swint
- gEDA-user: Dsub15 HD
Ineiev
- gEDA-user: Dsub15 HD
Ethan Swint
- gEDA-user: Dsub15 HD
Stefan Salewski
- gEDA-user: Dsub15 HD
Wojciech Kazubski
- gEDA-user: Feature Request Status-Terminal instead of dialogue and info boxes
Bert Timmerman
- gEDA-user: Feature Request Status-Terminal instead of dialogue and info boxes
Bert Timmerman
- gEDA-user: Feature Request Status-Terminal instead of dialogue and info boxes
Ineiev
- gEDA-user: Feature Request Status-Terminal instead of dialogue and info boxes
Ineiev
- gEDA-user: Feature Request Status-Terminal instead of dialogue and info boxes
Ineiev
- gEDA-user: Feature Request Status-Terminal instead of dialogue and info boxes
Torsten Wagner
- gEDA-user: Feature Request Status-Terminal instead of dialogue and info boxes
Torsten Wagner
- gEDA-user: Feature Request Status-Terminal instead of dialogue and info boxes
Torsten Wagner
- gEDA-user: Feature Request Status-Terminal instead of dialogue and info boxes
Peter Clifton
- gEDA-user: Feature Request Status-Terminal instead of dialogue and info boxes
Peter Clifton
- gEDA-user: Feature Request Status-Terminal instead of dialogue and info boxes
Peter Clifton
- gEDA-user: Feature Request Status-Terminal instead of dialogue and info boxes
Frank Bergmann
- gEDA-user: Footprint requests for pcb
Anthony Shanks
- gEDA-user: Footprint requests for pcb
John Luciani
- gEDA-user: Footprint requests for pcb
DJ Delorie
- gEDA-user: Footprint requests for pcb
DJ Delorie
- gEDA-user: Footprint requests for pcb
Anthony Shanks
- gEDA-user: Footprint requests for pcb
Anthony Shanks
- gEDA-user: Footprint requests for pcb
John Luciani
- gEDA-user: Footprint requests for pcb
Gabriel Paubert
- gEDA-user: Footprint requests for pcb
DJ Delorie
- gEDA-user: gEDA and pcb status and minigration from Eagle
Torsten Wagner
- gEDA-user: gEDA and pcb status and minigration from Eagle
Ineiev
- gEDA-user: gEDA and pcb status and minigration from Eagle
Stefan Salewski
- gEDA-user: gEDA and pcb status and minigration from Eagle
Peter Clifton
- gEDA-user: gEDA and pcb status and minigration from Eagle
Michael Sokolov
- gEDA-user: gEDA and pcb status and minigration from Eagle
Peter Clifton
- gEDA-user: gEDA and pcb status and minigration from Eagle
Ineiev
- gEDA-user: gEDA and pcb status and minigration from Eagle
Kai-Martin Knaak
- gEDA-user: gEDA and pcb status and minigration from Eagle
Bill Gatliff
- gEDA-user: gEDA and pcb status and minigration from Eagle
Peter TB Brett
- gEDA-user: gEDA and pcb status and minigration from Eagle
Christoph Lechner
- gEDA-user: gEDA and pcb status and minigration from Eagle
Dan McMahill
- gEDA-user: gEDA and pcb status and minigration from Eagle
Bob Paddock
- gEDA-user: gEDA and pcb status and minigration from Eagle
Torsten Wagner
- gEDA-user: gEDA and pcb status and minigration from Eagle
Torsten Wagner
- gEDA-user: gEDA and pcb status and minigration from Eagle
Peter Clifton
- gEDA-user: gEDA and pcb status and minigration from Eagle
Torsten Wagner
- gEDA-user: gEDA and pcb status and minigration from Eagle
Torsten Wagner
- gEDA-user: gEDA and pcb status and minigration from Eagle
Peter Clifton
- gEDA-user: gEDA and pcb status and minigration from Eagle
Michael Sokolov
- gEDA-user: gEDA and pcb status and minigration from Eagle
Bert Timmerman
- gEDA-user: gEDA and pcb status and minigration from Eagle
Steven Michalske
- gEDA-user: gEDA and pcb status and minigration from Eagle
Kai-Martin Knaak
- gEDA-user: gEDA cross probing
John Griessen
- gEDA-user: gEDA, awesome wm and dual monitor
Torsten Wagner
- gEDA-user: gEDA, awesome wm and dual monitor
Peter Clifton
- gEDA-user: gEDA, awesome wm and dual monitor
Peter Clifton
- gEDA-user: gEDA, awesome wm and dual monitor
John Doty
- gEDA-user: gEDA, awesome wm and dual monitor
DJ Delorie
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Peter Clifton
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Ineiev
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Stefan Salewski
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
DJ Delorie
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Peter Clifton
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Ineiev
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Ineiev
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Stephan Boettcher
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Gabriel Paubert
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Ineiev
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Ineiev
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Peter TB Brett
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Gabriel Paubert
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Gabriel Paubert
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Ineiev
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Peter Clifton
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
John Griessen
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
DJ Delorie
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Ineiev
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Michael Sokolov
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
DJ Delorie
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Peter Clifton
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Stefan Salewski
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Ineiev
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
michalwd1979
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Ineiev
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Ineiev
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Peter Clifton
- gEDA-user: gEDA-dev: Arc intersection connectivity bug
Peter Clifton
- gEDA-user: Get me out
Lance Earl
- gEDA-user: Get me out
Stefan Salewski
- gEDA-user: Get me out
Peter Clifton
- gEDA-user: gnucap development snapshot 2009-11-10
al davis
- gEDA-user: gschem: how to turn texts upside-down?
Peter TB Brett
- gEDA-user: gschem: how to turn texts upside-down?
Ineiev
- gEDA-user: gschem: how to turn texts upside-down?
Peter Clifton
- gEDA-user: gschem: how to turn texts upside-down?
Peter Clifton
- gEDA-user: gschem: how to turn texts upside-down?
Bill Gatliff
- gEDA-user: gschem: how to turn texts upside-down?
Ineiev
- gEDA-user: gschem: how to turn texts upside-down?
Peter Clifton
- gEDA-user: gschem: how to turn texts upside-down?
Ineiev
- gEDA-user: gschem: how to turn texts upside-down?
Peter Clifton
- gEDA-user: gschem: how to turn texts upside-down?
Ineiev
- gEDA-user: gschems component selection
Stefan Salewski
- gEDA-user: hierarchy browser app
gene glick
- gEDA-user: hierarchy browser app take 2
gene glick
- gEDA-user: hierarchy browser app take 2
gene glick
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
DJ Delorie
- gEDA-user: How to deal with single/dual parts?
Dave N6NZ
- gEDA-user: How to deal with single/dual parts?
Stefan Salewski
- gEDA-user: How to deal with single/dual parts?
Peter Clifton
- gEDA-user: How to deal with single/dual parts?
Kai-Martin Knaak
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
Stephan Boettcher
- gEDA-user: How to deal with single/dual parts?
Peter Clifton
- gEDA-user: How to deal with single/dual parts?
Peter Clifton
- gEDA-user: How to deal with single/dual parts?
Peter Clifton
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
Stephan Boettcher
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
Stefan Salewski
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
Steven Michalske
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
Peter Clifton
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
Peter Clifton
- gEDA-user: How to deal with single/dual parts?
Peter Clifton
- gEDA-user: How to deal with single/dual parts?
Peter Clifton
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
Peter Clifton
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
Peter Clifton
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
Dave N6NZ
- gEDA-user: How to deal with single/dual parts?
Kai-Martin Knaak
- gEDA-user: How to deal with single/dual parts?
Kai-Martin Knaak
- gEDA-user: How to deal with single/dual parts?
Kai-Martin Knaak
- gEDA-user: How to deal with single/dual parts?
Michael Sokolov
- gEDA-user: How to deal with single/dual parts?
Peter TB Brett
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
Peter Clifton
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
Kai-Martin Knaak
- gEDA-user: How to deal with single/dual parts?
Steven Michalske
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
Dave N6NZ
- gEDA-user: How to deal with single/dual parts?
Peter Clifton
- gEDA-user: How to deal with single/dual parts?
DJ Delorie
- gEDA-user: How to deal with single/dual parts?
Henry Von Bank
- gEDA-user: How to deal with single/dual parts?
Michael Sokolov
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
Peter TB Brett
- gEDA-user: How to deal with single/dual parts?
Stefan Salewski
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
Henry Von Bank
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
Greg Cunningham
- gEDA-user: How to deal with single/dual parts?
Peter TB Brett
- gEDA-user: How to deal with single/dual parts?
Stephan Boettcher
- gEDA-user: How to deal with single/dual parts?
Dan McMahill
- gEDA-user: How to deal with single/dual parts?
Dan McMahill
- gEDA-user: How to deal with single/dual parts?
John Luciani
- gEDA-user: How to deal with single/dual parts?
Kai-Martin Knaak
- gEDA-user: How to deal with single/dual parts?
Kai-Martin Knaak
- gEDA-user: How to deal with single/dual parts?
Kelvin Gardiner
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
Peter Clifton
- gEDA-user: How to deal with single/dual parts?
Peter Clifton
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
Peter Clifton
- gEDA-user: How to deal with single/dual parts?
Stuart Brorson
- gEDA-user: How to deal with single/dual parts?
Kai-Martin Knaak
- gEDA-user: How to deal with single/dual parts?
Stuart Brorson
- gEDA-user: How to deal with single/dual parts?
Phil Frost
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
Stefan Salewski
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
Steven Michalske
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
Stefan Salewski
- gEDA-user: How to deal with single/dual parts?
Stephan Boettcher
- gEDA-user: How to deal with single/dual parts?
Kai-Martin Knaak
- gEDA-user: How to deal with single/dual parts?
Kai-Martin Knaak
- gEDA-user: How to deal with single/dual parts?
Kai-Martin Knaak
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
Andrzej
- gEDA-user: How to deal with single/dual parts?
Peter TB Brett
- gEDA-user: How to deal with single/dual parts?
Gabriel Paubert
- gEDA-user: How to deal with single/dual parts?
Bill Gatliff
- gEDA-user: How to deal with single/dual parts?
John Doty
- gEDA-user: How to deal with single/dual parts?
Kai-Martin Knaak
- gEDA-user: How to deal with single/dual parts?
Peter Clifton
- gEDA-user: How to deal with single/dual parts?
Kai-Martin Knaak
- gEDA-user: How to remove a element name from the silk layer
Torsten Wagner
- gEDA-user: How to remove a element name from the silk layer
DJ Delorie
- gEDA-user: How to remove a element name from the silk layer
Torsten Wagner
- gEDA-user: How to remove a element name from the silk layer
DJ Delorie
- gEDA-user: howto print with "pcb -x eps" ?
Kai-Martin Knaak
- gEDA-user: howto print with "pcb -x eps" ?
DJ Delorie
- gEDA-user: howto print with "pcb -x eps" ?
Kai-Martin Knaak
- gEDA-user: howto print with "pcb -x eps" ?
DJ Delorie
- gEDA-user: howto print with "pcb -x eps" ?
Kai-Martin Knaak
- gEDA-user: howto print with "pcb -x eps" ?
DJ Delorie
- gEDA-user: Ideas for fixing slotting, methodology discussion, NOT implementation details!
Bob Paddock
- gEDA-user: Ideas for fixing slotting, methodology discussion, NOT implementation details!
Steven Michalske
- gEDA-user: Ideas for fixing slotting, methodology discussion, NOT implementation details!
Steven Michalske
- gEDA-user: Ideas for fixing slotting, methodology discussion, NOT implementation details!
Steven Michalske
- gEDA-user: Ideas for fixing slotting, methodology discussion, NOT implementation details!
Dave N6NZ
- gEDA-user: Ideas for fixing slotting, methodology discussion, NOT implementation details!
Bill Gatliff
- gEDA-user: Ideas for fixing slotting, methodology discussion, NOT implementation details!
Bill Gatliff
- gEDA-user: Ideas for fixing slotting, methodology discussion, NOT implementation details!
Bill Gatliff
- gEDA-user: Ideas for fixing slotting, methodology discussion, NOT implementation details!
Bert Timmerman
- gEDA-user: Ideas for fixing slotting, methodology discussion, NOT implementation details!
Stefan Salewski
- gEDA-user: Ideas for fixing slotting, methodology discussion, NOT implementation details!
Stefan Salewski
- gEDA-user: Ideas for fixing slotting, methodology discussion, NOT implementation details!
Bill Gatliff
- gEDA-user: Ideas for fixing slotting, methodology discussion, NOT implementation details!
Bill Gatliff
- gEDA-user: Ideas for fixing slotting, methodology discussion, NOT implementation details!
Stefan Salewski
- gEDA-user: Index pcb footprint library
Jorge Ernesto
- gEDA-user: Index pcb footprint library
DJ Delorie
- gEDA-user: Introducing pschem
Andrzej
- gEDA-user: Kudos
Eric Brombaugh
- gEDA-user: Kudos
Peter TB Brett
- gEDA-user: Kudos
John Doty
- gEDA-user: Kudos
Duncan Drennan
- gEDA-user: Kudos
Eric Brombaugh
- gEDA-user: Kudos
Gabriel Paubert
- gEDA-user: Kudos
evan foss
- gEDA-user: Lost my custom pcb footprints.
Tony Radice
- gEDA-user: Lost my custom pcb footprints.
DJ Delorie
- gEDA-user: More GL stuff to test
Peter Clifton
- gEDA-user: More GL stuff to test
Bill Gatliff
- gEDA-user: More GL stuff to test
Peter Clifton
- gEDA-user: More GL stuff to test
John Griessen
- gEDA-user: More GL stuff to test
Christoph Lechner
- gEDA-user: More GL stuff to test
Peter TB Brett
- gEDA-user: More GL stuff to test
Peter Clifton
- gEDA-user: More GL stuff to test
Jonatan Åkerlind
- gEDA-user: More GL stuff to test
Bert Timmerman
- gEDA-user: More GL stuff to test
andrew whyte
- gEDA-user: More questions about pcb
Anthony Shanks
- gEDA-user: More questions about pcb
Atommann
- gEDA-user: More questions about pcb
Ineiev
- gEDA-user: More questions about pcb
Atommann
- gEDA-user: More questions about pcb
Kai-Martin Knaak
- gEDA-user: More questions about pcb
DJ Delorie
- gEDA-user: More questions about pcb
Anthony Shanks
- gEDA-user: More questions about pcb
Stefan Salewski
- gEDA-user: More questions about pcb
Stefan Salewski
- gEDA-user: More questions about pcb
Peter Clifton
- gEDA-user: More strange ideas: Start PCB layout from symbols view
DJ Delorie
- gEDA-user: More strange ideas: Start PCB layout from symbols view
Kai-Martin Knaak
- gEDA-user: More strange ideas: Start PCB layout from symbols view
Peter Clifton
- gEDA-user: More strange ideas: Start PCB layout from symbols view
Ben Jackson
- gEDA-user: More strange ideas: Start PCB layout from symbols view
Kai-Martin Knaak
- gEDA-user: More strange ideas: Start PCB layout from symbols view
Kai-Martin Knaak
- gEDA-user: More strange ideas: Start PCB layout from symbols view
John Doty
- gEDA-user: More strange ideas: Start PCB layout from symbols view
Stefan Salewski
- gEDA-user: More strange ideas: Start PCB layout from symbols view
Dan McMahill
- gEDA-user: New Dsub15 HD footprint & some questions
Anthony Shanks
- gEDA-user: new ethernet chip...
DJ Delorie
- gEDA-user: new ethernet chip...
Ben Jackson
- gEDA-user: new ethernet chip...
DJ Delorie
- gEDA-user: new ethernet chip...
Karl Hammar
- gEDA-user: new ethernet chip...
Dylan Smith
- gEDA-user: new ethernet chip...
DJ Delorie
- gEDA-user: new ethernet chip...
Christoph Lechner
- gEDA-user: new ethernet chip...
DJ Delorie
- gEDA-user: new ethernet chip...
Dave McGuire
- gEDA-user: new ethernet chip...
Christoph Lechner
- gEDA-user: new ethernet chip...
Christoph Lechner
- gEDA-user: Newbie-Problems no footprints in pcb after gsch2pcb
Torsten Wagner
- gEDA-user: Newbie-Problems no footprints in pcb after gsch2pcb
DJ Delorie
- gEDA-user: Number of Layers
Tony Radice
- gEDA-user: Number of Layers
Torsten Wagner
- gEDA-user: Number of Layers
DJ Delorie
- gEDA-user: Number of Layers
Tony Radice
- gEDA-user: Number of Layers
DJ Delorie
- gEDA-user: Number of Layers
Bob Paddock
- gEDA-user: Number of Layers
DJ Delorie
- gEDA-user: Number of Layers
Gabriel Paubert
- gEDA-user: Number of Layers
Gabriel Paubert
- gEDA-user: Number of Layers
Tony Radice
- gEDA-user: opamp slew rate limiting
carzrgr8 at optonline.net
- gEDA-user: opamp slew rate limiting
asomers at gmail.com
- gEDA-user: opamp slew rate limiting
Dan McMahill
- gEDA-user: opamp slew rate limiting
Ozzy Lash
- gEDA-user: opamp slew rate limiting
Peter TB Brett
- gEDA-user: opamp slew rate limiting
Andy Fierman
- gEDA-user: opamp slew rate limiting
gene glick
- gEDA-user: opamp slew rate limiting
Andy Fierman
- gEDA-user: opamp slew rate limiting
Martin Maney
- gEDA-user: opamp slew rate limiting
Dave McGuire
- gEDA-user: opamp slew rate limiting
John Doty
- gEDA-user: opamp slew rate limiting
gene glick
- gEDA-user: opamp slew rate limiting
Mark Rages
- gEDA-user: opamp slew rate limiting
Mark Rages
- gEDA-user: opamp slew rate limiting
gene glick
- gEDA-user: OT: Learning Scheme? WAS: How to deal with single/dual parts?
John Doty
- gEDA-user: OT: Learning Scheme? WAS: How to deal with single/dual parts?
John Luciani
- gEDA-user: OT: Learning Scheme? WAS: How to deal with single/dual parts?
Mark Stanley
- gEDA-user: OT: Learning Scheme? WAS: How to deal with single/dual parts?
Gareth Edwards
- gEDA-user: OT: Learning Scheme? WAS: How to deal with single/dual parts?
John Doty
- gEDA-user: OT: Learning Scheme? WAS: How to deal with single/dual parts?
Gareth Edwards
- gEDA-user: OT: Learning Scheme? WAS: How to deal with single/dual parts?
Mark Stanley
- gEDA-user: pcb [PATCH] Added ActionSetViasTented to allow for setting the solder mask of vias to be fully tented.
Gabriel Paubert
- gEDA-user: pcb [PATCH] Added ActionSetViasTented to allow for setting the solder mask of vias to be fully tented.
Bert Timmerman
- gEDA-user: PCB attributes [was: pcb... working on ebuild, PCB.. layer colors]
Ineiev
- gEDA-user: pcb circles turn into hexagons
Kai-Martin Knaak
- gEDA-user: pcb circles turn into hexagons
Ineiev
- gEDA-user: pcb circles turn into hexagons
Peter Clifton
- gEDA-user: pcb circles turn into hexagons
DJ Delorie
- gEDA-user: pcb circles turn into hexagons
Peter Clifton
- gEDA-user: pcb circles turn into hexagons
DJ Delorie
- gEDA-user: pcb circles turn into hexagons
Peter Clifton
- gEDA-user: pcb circles turn into hexagons
DJ Delorie
- gEDA-user: pcb circles turn into hexagons
Peter Clifton
- gEDA-user: pcb circles turn into hexagons
Peter Clifton
- gEDA-user: pcb circles turn into hexagons
Peter Clifton
- gEDA-user: pcb circles turn into hexagons
DJ Delorie
- gEDA-user: pcb circles turn into hexagons
Peter Clifton
- gEDA-user: pcb circles turn into hexagons
DJ Delorie
- gEDA-user: pcb circles turn into hexagons
DJ Delorie
- gEDA-user: pcb circles turn into hexagons
Peter Clifton
- gEDA-user: pcb circles turn into hexagons
Peter Clifton
- gEDA-user: pcb circles turn into hexagons
DJ Delorie
- gEDA-user: pcb circles turn into hexagons
Peter Clifton
- gEDA-user: pcb circles turn into hexagons
Kai-Martin Knaak
- gEDA-user: pcb circles turn into hexagons
Kai-Martin Knaak
- gEDA-user: pcb circles turn into hexagons
Peter Clifton
- gEDA-user: PCB Copy / Panellizing
Tony Radice
- gEDA-user: PCB Copy / Panellizing
Peter Clifton
- gEDA-user: PCB Copy / Panellizing
Bob Paddock
- gEDA-user: PCB Copy Issue
Tony Radice
- gEDA-user: PCB Copy Issue
Ineiev
- gEDA-user: PCB Copy Issue
Ineiev
- gEDA-user: PCB Copy Issue
Peter Clifton
- gEDA-user: PCB Copy Issue
Peter Clifton
- gEDA-user: PCB Copy Issue
Bob Paddock
- gEDA-user: PCB Copy Issue
John Eaton
- gEDA-user: PCB Copy Issue
Peter Clifton
- gEDA-user: PCB GIT: tracking inter-file moves
Ineiev
- gEDA-user: PCB GIT: tracking inter-file moves
Peter TB Brett
- gEDA-user: PCB GIT: tracking inter-file moves
Peter Clifton
- gEDA-user: PCB GIT: tracking inter-file moves
Ineiev
- gEDA-user: PCB GIT: tracking inter-file moves
Ben Jackson
- gEDA-user: PCB GIT: tracking inter-file moves
Peter Clifton
- gEDA-user: PCB GIT: tracking inter-file moves
Ineiev
- gEDA-user: PCB GIT: tracking inter-file moves
Ineiev
- gEDA-user: PCB not saving silkscreen when I try to make footprints
Kai-Martin Knaak
- gEDA-user: PCB not saving silkscreen when I try to make footprints
Anthony Shanks
- gEDA-user: PCB not saving silkscreen when I try to make footprints
Anthony Shanks
- gEDA-user: PCB not saving silkscreen when I try to make footprints
Stefan Salewski
- gEDA-user: PCB to G-CODE export GUI
Alberto Maccioni
- gEDA-user: PCB to G-CODE export GUI
Matthew Sager
- gEDA-user: PCB to G-CODE export GUI
Mark Stanley
- gEDA-user: PCB to G-CODE export GUI
Peter Clifton
- gEDA-user: PCB to G-CODE export GUI
Alberto Maccioni
- gEDA-user: PCB to G-CODE export GUI
Peter Clifton
- gEDA-user: PCB to G-CODE export GUI
Alberto Maccioni
- gEDA-user: PCB+GL benchmark revisited
Kai-Martin Knaak
- gEDA-user: PCB+GL benchmark revisited
Peter Clifton
- gEDA-user: PCB+GL benchmark revisited
Ed Maste
- gEDA-user: PCB+GL benchmark revisited
Mark Stanley
- gEDA-user: PCB+GL benchmark revisited
Peter Clifton
- gEDA-user: PCB+GL benchmark revisited
Stephan Boettcher
- gEDA-user: PCB+GL benchmark revisited
Peter Clifton
- gEDA-user: PCB+GL benchmark revisited
Ethan Swint
- gEDA-user: PCB+GL branch - labels hidden under pads
Mark
- gEDA-user: PCB+GL Reshuffle, and a WARNING to those with "pours"...
Peter Clifton
- gEDA-user: PCB+GL testing
Peter Clifton
- gEDA-user: PCB+GL testing
Mark
- gEDA-user: PCB+GL testing
Peter Clifton
- gEDA-user: PCB+GL testing
Mark
- gEDA-user: PCB, --enable-m4lib-png needs gdlib with png support?
Stefan Salewski
- gEDA-user: PCB, --enable-m4lib-png needs gdlib with png support?
Dan McMahill
- gEDA-user: PCB, --enable-m4lib-png needs gdlib with png support?
Stefan Salewski
- gEDA-user: PCB, I lost my layer colors
DJ Delorie
- gEDA-user: PCB, I lost my layer colors
Ineiev
- gEDA-user: PCB, I lost my layer colors
Peter Clifton
- gEDA-user: PCB, I lost my layer colors
DJ Delorie
- gEDA-user: pcb-20091103
Dan McMahill
- gEDA-user: pcb-20091103
Ineiev
- gEDA-user: pcb-20091103
Peter TB Brett
- gEDA-user: pcb-20091103
Ineiev
- gEDA-user: pcb-20091103
Peter TB Brett
- gEDA-user: pcb-20091103
Ineiev
- gEDA-user: pcb-20091103
Chitlesh GOORAH
- gEDA-user: pcb-20091103
Ineiev
- gEDA-user: pcb-20091103
Chitlesh GOORAH
- gEDA-user: pcb-20091103
Ineiev
- gEDA-user: pcb-20091103
Bert Timmerman
- gEDA-user: pcb-20091103
Ineiev
- gEDA-user: pcb-20091103
Bert Timmerman
- gEDA-user: pcb-20091103
Chitlesh GOORAH
- gEDA-user: pcb-20091103
Bert Timmerman
- gEDA-user: pcb-20091103
Chitlesh GOORAH
- gEDA-user: pcb-20091103 - examples and tutorials
Chitlesh GOORAH
- gEDA-user: pcb-20091103 - examples and tutorials
Peter Clifton
- gEDA-user: pcb-20091103 - examples and tutorials
Chitlesh GOORAH
- gEDA-user: pcb-20091103 - Merge*** tools
Chitlesh GOORAH
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Stefan Salewski
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Chitlesh GOORAH
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Peter Clifton
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Peter Clifton
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Stefan Salewski
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Peter Clifton
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Peter Clifton
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Stefan Salewski
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Ineiev
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Peter Clifton
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Peter Clifton
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Stefan Salewski
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Stefan Salewski
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Peter Clifton
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Stefan Salewski
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Stefan Salewski
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Stefan Salewski
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Stefan Salewski
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Peter Clifton
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Stefan Salewski
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Peter Clifton
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Stefan Salewski
- gEDA-user: pcb-20091103 for Gentoo, working on ebuild
Peter Clifton
- gEDA-user: pcb20091103, --enable-m4lib-png, but no png pictures
Stefan Salewski
- gEDA-user: pcb20091103, --enable-m4lib-png, but no png pictures
Stefan Salewski
- gEDA-user: pcb20091103, --enable-m4lib-png, but no png pictures
Ineiev
- gEDA-user: pcb20091103, --enable-m4lib-png, but no png pictures
Dan McMahill
- gEDA-user: PCB: AutoRouter
myken
- gEDA-user: PCB: AutoRouter
Stefan Salewski
- gEDA-user: PCB: AutoRouter
Ineiev
- gEDA-user: PCB: AutoRouter
Anthony Blake
- gEDA-user: PCB: AutoRouter
Anthony Blake
- gEDA-user: PCB: AutoRouter
Stefan Salewski
- gEDA-user: PCB: AutoRouter
Anthony Blake
- gEDA-user: PCB: AutoRouter
Stefan Salewski
- gEDA-user: PCB: AutoRouter
Ineiev
- gEDA-user: PCB: AutoRouter
Stefan Salewski
- gEDA-user: PCB: AutoRouter
Stefan Salewski
- gEDA-user: PCB: AutoRouter
Ineiev
- gEDA-user: PCB: AutoRouter
Stefan Salewski
- gEDA-user: PCB: AutoRouter (Stefan Salewski)
KURT PETERS
- gEDA-user: PCB: AutoRouter (Stefan Salewski)
myjunk stuff
- gEDA-user: PCB: AutoRouter (Stefan Salewski)
KURT PETERS
- gEDA-user: PCB: Can't move without silk layer switched on
Torsten Wagner
- gEDA-user: PCB: Can't move without silk layer switched on
Stefan Salewski
- gEDA-user: PCB: Can't move without silk layer switched on
Torsten Wagner
- gEDA-user: PCB: DRC segfault on a ratline
Ineiev
- gEDA-user: PCB: DRC segfault on a ratline
Peter Clifton
- gEDA-user: PCB: DRC segfault on a ratline
Ineiev
- gEDA-user: PCB: DRC segfault on a ratline
Peter Clifton
- gEDA-user: PCB: DRC segfault on a ratline
Ineiev
- gEDA-user: PCB: window focus bug in GL branch?
Ethan Swint
- gEDA-user: PCB: window focus bug in GL branch?
Kai-Martin Knaak
- gEDA-user: PCB: window focus bug in GL branch?
Peter Clifton
- gEDA-user: PCB: window focus bug in GL branch?
Ethan Swint
- gEDA-user: PCB: window focus bug in GL branch?
Ethan Swint
- gEDA-user: PCB: window focus bug in GL branch?
Peter Clifton
- gEDA-user: powermeter results!
DJ Delorie
- gEDA-user: powermeter results!
Stefan Salewski
- gEDA-user: powermeter results!
John Griessen
- gEDA-user: powermeter results!
Torsten Wagner
- gEDA-user: powermeter results!
Larry Doolittle
- gEDA-user: powermeter results!
DJ Delorie
- gEDA-user: powermeter results!
DJ Delorie
- gEDA-user: powermeter results!
Torsten Wagner
- gEDA-user: powermeter results!
Torsten Wagner
- gEDA-user: powermeter results!
Jason
- gEDA-user: Public gEDA revision control systems?
Stefan Salewski
- gEDA-user: Public gEDA revision control systems?
Peter Clifton
- gEDA-user: Public gEDA revision control systems?
DJ Delorie
- gEDA-user: Public gEDA revision control systems?
DJ Delorie
- gEDA-user: Public gEDA revision control systems?
Peter Clifton
- gEDA-user: Purpose of this list
Stefan Salewski
- gEDA-user: Purpose of this list
Peter Clifton
- gEDA-user: Purpose of this list
DJ Delorie
- gEDA-user: Purpose of this list
Stefan Salewski
- gEDA-user: Purpose of this list
Stuart Brorson
- gEDA-user: Purpose of this list
Bill Gatliff
- gEDA-user: Purpose of this list
Dave N6NZ
- gEDA-user: Purpose of this list
John Griessen
- gEDA-user: Purpose of this list
Bert Timmerman
- gEDA-user: Purpose of this list
Dave McGuire
- gEDA-user: Purpose of this list
Mark Rages
- gEDA-user: Purpose of this list
Kai-Martin Knaak
- gEDA-user: Purpose of this list
John E. Perry
- gEDA-user: Purpose of this list
Peter Clifton
- gEDA-user: Reducing the amount of jumpers
Link
- gEDA-user: Reducing the amount of jumpers
DJ Delorie
- gEDA-user: Reducing the amount of jumpers
Link
- gEDA-user: Reducing the amount of jumpers
Dave N6NZ
- gEDA-user: Reducing the amount of jumpers
DJ Delorie
- gEDA-user: Reducing the amount of jumpers
asomers at gmail.com
- gEDA-user: Reducing the amount of jumpers
DJ Delorie
- gEDA-user: Reducing the amount of jumpers
Mark Stanley
- gEDA-user: Reducing the amount of jumpers
Link
- gEDA-user: Reducing the amount of jumpers
Stephan Boettcher
- gEDA-user: Reducing the amount of jumpers
Ben Jackson
- gEDA-user: Reducing the amount of jumpers
Gabriel Paubert
- gEDA-user: Reducing the amount of jumpers
DJ Delorie
- gEDA-user: rotatable curvy lines in pcb
John Griessen
- gEDA-user: rotatable curvy lines in pcb
DJ Delorie
- gEDA-user: sd-card connector sym and fp needed
Michael Kamper
- gEDA-user: sd-card connector sym and fp needed
DJ Delorie
- gEDA-user: Some questions about pcb
Anthony Shanks
- gEDA-user: Some questions about pcb
DJ Delorie
- gEDA-user: Some questions about pcb
Anthony Shanks
- gEDA-user: Some questions about pcb
DJ Delorie
- gEDA-user: Some questions about pcb
Anthony Shanks
- gEDA-user: Some questions about pcb
Kai-Martin Knaak
- gEDA-user: Some questions about pcb
DJ Delorie
- gEDA-user: Some questions about pcb
Kai-Martin Knaak
- gEDA-user: Some questions about pcb
Mark Stanley
- gEDA-user: Some questions about pcb
Jared Casper
- gEDA-user: Some questions about pcb
Kai-Martin Knaak
- gEDA-user: Some questions about pcb
Jared Casper
- gEDA-user: Some questions about pcb
Kai-Martin Knaak
- gEDA-user: Some questions about pcb
Jared Casper
- gEDA-user: Some questions about pcb
Peter Clifton
- gEDA-user: Some questions about pcb
Stefan Salewski
- gEDA-user: Some questions about pcb
Mark Stanley
- gEDA-user: Strange PCB waring about shorted nets
michalwd1979
- gEDA-user: Strange PCB waring about shorted nets
Stefan Salewski
- gEDA-user: Strange PCB waring about shorted nets
michalwd1979
- gEDA-user: Strange PCB waring about shorted nets
Stefan Salewski
- gEDA-user: Strange PCB waring about shorted nets
Peter Clifton
- gEDA-user: Strange PCB warning
Stefan Salewski
- gEDA-user: Strange PCB warning
Stefan Salewski
- gEDA-user: Strange PCB warning
Stefan Salewski
- gEDA-user: Strange PCB warning
Peter Clifton
- gEDA-user: Strange PCB warning
Ineiev
- gEDA-user: Strange PCB warning
Ineiev
- gEDA-user: Strange PCB warning
Peter Clifton
- gEDA-user: Strange PCB warning
Ineiev
- gEDA-user: Strange PCB warning
Ineiev
- gEDA-user: Strange PCB warning
Stefan Salewski
- gEDA-user: Strange PCB warning
Stefan Salewski
- gEDA-user: Switch gschem to another scripting language?
Stuart Brorson
- gEDA-user: Switch gschem to another scripting language?
Dave McGuire
- gEDA-user: Switch gschem to another scripting language?
DJ Delorie
- gEDA-user: Switch gschem to another scripting language?
Dave McGuire
- gEDA-user: Switch gschem to another scripting language?
Kai-Martin Knaak
- gEDA-user: Switch gschem to another scripting language?
John Doty
- gEDA-user: Switch gschem to another scripting language?
Dave McGuire
- gEDA-user: Switch gschem to another scripting language?
John Griessen
- gEDA-user: Switch gschem to another scripting language?
myken at iae.nl
- gEDA-user: Switch gschem to another scripting language?
Peter TB Brett
- gEDA-user: Switch gschem to another scripting language?
Gabriel Paubert
- gEDA-user: Switch gschem to another scripting language?
Bill Gatliff
- gEDA-user: Switch gschem to another scripting language?
Dave McGuire
- gEDA-user: Switch gschem to another scripting language?
Peter TB Brett
- gEDA-user: Switch gschem to another scripting language?
Dave McGuire
- gEDA-user: Switch gschem to another scripting language?
Kai-Martin Knaak
- gEDA-user: Switch gschem to another scripting language?
John Doty
- gEDA-user: symbol files
Kelvin Gardiner
- gEDA-user: symbol files
Peter Clifton
- gEDA-user: symbol files
Kai-Martin Knaak
- gEDA-user: symbol files
Dave N6NZ
- gEDA-user: symbol files
Kelvin Gardiner
- gEDA-user: symbol files
Peter TB Brett
- gEDA-user: symbol files
Bill Gatliff
- gEDA-user: symbol files
Peter TB Brett
- gEDA-user: symbol files
Kelvin Gardiner
- gEDA-user: symbol files
Peter TB Brett
- gEDA-user: symbol files
Peter TB Brett
- gEDA-user: symbol files
Bill Gatliff
- gEDA-user: symbol files
Dave N6NZ
- gEDA-user: symbol files
DJ Delorie
- gEDA-user: symbol files
John Doty
- gEDA-user: symbol files
Dave N6NZ
- gEDA-user: symbol files
DJ Delorie
- gEDA-user: symbol files
Dan McMahill
- gEDA-user: symbol files
John Doty
- gEDA-user: symbol files
John Doty
- gEDA-user: symbol files
Kelvin Gardiner
- gEDA-user: symbol files
Dan McMahill
- gEDA-user: Teardrop plugin
Vincent Onelli
- gEDA-user: Teardrop plugin
Peter Clifton
- gEDA-user: Teardrop plugin
DJ Delorie
- gEDA-user: Teardrop plugin
Stefan Salewski
- gEDA-user: Teardrop plugin
Steven Michalske
- gEDA-user: Teardrop plugin
Bert Timmerman
- gEDA-user: Teardrops plugin
Vincent Onelli
- gEDA-user: Teardrops plugin
Bert Timmerman
- gEDA-user: Teardrops plugin
Bert Timmerman
- gEDA-user: Thank You
Tony Radice
- gEDA-user: toporouter use question
John Griessen
- gEDA-user: toporouter use question
DJ Delorie
- gEDA-user: toporouter use question
Anthony Blake
- gEDA-user: toporouter use question
John Griessen
- gEDA-user: trying to compile gwave 20090213
Andreas K. Huettel
- gEDA-user: trying to compile gwave 20090213
Peter Clifton
- gEDA-user: trying to compile gwave 20090213
Andreas K. Huettel
- gEDA-user: trying to compile gwave 20090213
Stefan Salewski
- gEDA-user: trying to compile gwave 20090213
Chitlesh GOORAH
- gEDA-user: trying to compile gwave 20090213
Stefan Salewski
- gEDA-user: trying to compile gwave 20090213
Stefan Salewski
- gEDA-user: trying to compile gwave 20090213
KURT PETERS
- gEDA-user: trying to compile gwave 20090213
Stefan Salewski
- gEDA-user: trying to compile gwave 20090213
Chitlesh GOORAH
- gEDA-user: trying to compile gwave 20090213
al davis
- gEDA-user: trying to compile gwave 20090213
Peter Clifton
- gEDA-user: trying to compile gwave 20090213
Andreas K. Huettel
- gEDA-user: trying to compile gwave 20090213
Werner Hoch
- gEDA-user: trying to compile gwave 20090213
Chitlesh GOORAH
- gEDA-user: trying to compile gwave 20090213
Werner Hoch
- gEDA-user: trying to compile gwave 20090213 (SOLVED)
Andreas K. Huettel
- gEDA-user: two layer fab
John Griessen
- gEDA-user: two layer fab
DJ Delorie
- gEDA-user: two layer fab
John Griessen
- gEDA-user: Ubuntu package for 1.6 and footprints
Kelvin Gardiner
- gEDA-user: Ubuntu package for 1.6 and footprints
DJ Delorie
- gEDA-user: Ubuntu package for 1.6 and footprints
R. Bosch
- gEDA-user: Ubuntu package for 1.6 and footprints
Peter Clifton
- gEDA-user: Ubuntu package for 1.6 and footprints
R. Bosch
- gEDA-user: Ubuntu package for 1.6 and footprints
John P. Doty
- gEDA-user: Ubuntu package for 1.6 and footprints
R. Bosch
- gEDA-user: Ubuntu package for 1.6 and footprints
Peter Clifton
- gEDA-user: Ubuntu package for 1.6 and footprints
Kelvin Gardiner
- gEDA-user: Ubuntu package for 1.6 and footprints
Peter Clifton
- gEDA-user: unumber on copy-paste
Kai-Martin Knaak
- gEDA-user: unumber on copy-paste
Peter Clifton
- gEDA-user: unumber on copy-paste
Kai-Martin Knaak
- gEDA-user: unumber on copy-paste
Peter Clifton
- gEDA-user: unumber on copy-paste
Peter Clifton
- gEDA-user: Why not have components/symbols contain other components/symbols?
John Griessen
- gEDA-user: xgsch2pcb config dialog
Peter Clifton
- gEDA-user: xgsch2pcb config dialog
Christoph Lechner
- gEDA-user: xgsch2pcb config dialog
Kai-Martin Knaak
- gEDA-user: xgsch2pcb config dialog
Peter Clifton
- gEDA-user: xgsch2pcb config dialog
Girvin R. Herr
- gEDA-user: xgsch2pcb config dialog
Peter TB Brett
- gEDA-user: xgsch2pcb config dialog
Peter Clifton
- gEDA-user: xgsch2pcb config dialog
Peter TB Brett
- gEDA-user: xgsch2pcb config dialog
Peter TB Brett
Last message date:
Mon Nov 30 21:26:43 EST 2009
Archived on: Thu Sep 30 10:13:37 EDT 2010
This archive was generated by
Pipermail 0.09 (Mailman edition).