February 2009 Archives by date
Starting: Sun Feb 1 07:36:15 EST 2009
Ending: Sat Feb 28 19:51:12 EST 2009
Messages: 528
- gEDA-user: gschem usage: rotate symbol, leave text alone
Carlos Nieves Ónega
- gEDA-user: gschem usage: rotate symbol, leave text alone
Carlos Nieves Ónega
- gEDA-user: GTKWave
Chitlesh GOORAH
- gEDA-user: Design a keyboard with gschem/pcb
Kai-Martin Knaak
- gEDA-user: Any discussion about combining schematics and symbols into one file?
Kai-Martin Knaak
- gEDA-user: Design a keyboard with gschem/pcb
John Luciani
- gEDA-user: gschem usage: rotate symbol, leave text alone
Kai-Martin
- gEDA-user: Fwd: Re: gschem usage: rotate symbol, leave text alone [kmk at familieknaak.de]
Kai-Martin
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
Gabriel Paubert
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
Peter Clifton
- [PATCH] Don't use a VBO
Peter Clifton
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Peter Clifton
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
DJ Delorie
- gEDA-user: Gschem - Setting pin numbers on logic gates
Nick Nobody
- gEDA-user: Gschem - Setting pin numbers on logic gates
John Luciani
- gEDA-user: Gschem - Setting pin numbers on logic gates
Nick Nobody
- gEDA-user: gschem usage: rotate symbol, leave text alone
Denis Grelich
- gEDA-user: symbol 7495 - wrong pin direction
Oliver Lehmann
- gEDA-user: gschem usage: rotate symbol, leave text alone
Kai-Martin Knaak
- gEDA-user: PCB Ground Plane - Autowiring?
Marcel.Schmedes.EXTERN at diehl-aerospace.de
- gEDA-user: PCB Ground Plane - Autowiring?
DJ Delorie
- gEDA-user: symbol 7495 - wrong pin direction
Werner Hoch
- gEDA-user: PCB Ground Plane - Autowiring?
Ethan Swint
- gEDA-user: PCB Ground Plane - Autowiring?
Peter Clifton
- gEDA-user: PCB Ground Plane - Autowiring?
Kai-Martin Knaak
- gEDA-user: PCB Ground Plane - Autowiring?
DJ Delorie
- gEDA-user: PCB Ground Plane - Autowiring?
Peter Clifton
- gEDA-user: PCB property tweak dialog [was PCB Ground Plane - Autowiring?]
Ethan Swint
- gEDA-user: PCB property tweak dialog [was PCB Ground Plane - Autowiring?]
Peter Clifton
- gEDA-user: PCB property tweak dialog [was PCB Ground Plane - Autowiring?]
Ethan Swint
- gEDA-user: PCB Ground Plane - Autowiring?
Gabriel Paubert
- gEDA-user: Gschem - Setting pin numbers on logic gates
Joerg
- gEDA-user: gschem usage: rotate symbol, leave text alone
Carlos Nieves Ónega
- gEDA-user: gschem usage: rotate symbol, leave text alone
Kai-Martin Knaak
- gEDA-user: Antwort: Re: PCB Ground Plane - Autowiring?
Marcel.Schmedes.EXTERN at diehl-aerospace.de
- gEDA-user: Antwort: Re: PCB Ground Plane - Autowiring?
Marcel.Schmedes.EXTERN at diehl-aerospace.de
- gEDA-user: ngspice rework-18 compiling errors OS X
Traylor Roger
- gEDA-user: Design a keyboard with gschem/pcb
Kai-Martin Knaak
- gEDA-user: OT: Single sided PCB...
Mike Jarabek
- gEDA-user: OT: Single sided PCB...
DJ Delorie
- gEDA-user: OT: Single sided PCB...
Dave McGuire
- gEDA-user: OT: Single sided PCB...
Bob Paddock
- gEDA-user: OT: Single sided PCB...
Windell H. Oskay
- gEDA-user: PCB build breaks on HTML docs
Ethan Swint
- gEDA-user: PCB build breaks on HTML docs
Tamas Szabo
- gEDA-user: PCB build breaks on HTML docs
Tamas Szabo
- gEDA-user: OT: Single sided PCB...
Gabriel Paubert
- gEDA-user: Make discussion about gEDA
Windell H. Oskay
- gEDA-user: label printing
Levente Kovacs
- gEDA-user: vendor resource file and fab houses
Saritha Kalyanam
- gEDA-user: label printing
Larry Doolittle
- gEDA-user: label printing
DJ Delorie
- gEDA-user: vendor resource file and fab houses
John Luciani
- gEDA-user: label printing
der Mouse
- gEDA-user: PCIe x4 connector footprints
Ethan Swint
- gEDA-user: Preferred debugger/development environment: PCB
Ethan Swint
- gEDA-user: generate BOM with coalesced refdes's
Mark Rages
- gEDA-user: Preferred debugger/development environment: PCB
DJ Delorie
- gEDA-user: Preferred debugger/development environment: PCB
Peter Clifton
- gEDA-user: generate BOM with coalesced refdes's
Peter Clifton
- gEDA-user: generate BOM with coalesced refdes's
Peter Clifton
- gEDA-user: generate BOM with coalesced refdes's
Ethan Swint
- gEDA-user: Preferred debugger/development environment: PCB
Dan McMahill
- gEDA-user: Importing board outline from .emn file
Neil Webster
- gEDA-user: gnucap development snapshot 2009-02-02
al davis
- gEDA-user: Importing board outline from .emn file
DJ Delorie
- gEDA-user: Preferred debugger/development environment: PCB
der Mouse
- gEDA-user: Importing board outline from .emn file
Neil Webster
- gEDA-user: Importing board outline from .emn file
DJ Delorie
- gEDA-user: label printing
Stefan Salewski
- gEDA-user: New gwave 20090124 on Sourceforge
steve tell
- gEDA-user: new symbols
Oliver Lehmann
- gEDA-user: New gwave 20090124 on Sourceforge
DJ Delorie
- gEDA-user: label printing
Stephan Boettcher
- gEDA-user: Preferred debugger/development environment: PCB
Stephan Boettcher
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
Gabriel Paubert
- gEDA-user: new symbols
Kai-Martin Knaak
- gEDA-user: new symbols
Ales Hvezda
- gEDA-user: Preferred debugger/development environment: PCB
Ethan Swint
- gEDA-user: Preferred debugger/development environment: PCB
Kai-Martin Knaak
- gEDA-user: new symbols
Kai-Martin Knaak
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
Peter Clifton
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
Dave McGuire
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
der Mouse
- gEDA-user: new symbols
DJ Delorie
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
Dave McGuire
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
der Mouse
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
David C. Kerber
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
Dave McGuire
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
DJ Delorie
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
Dave McGuire
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
DJ Delorie
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
Daniel Svärd
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
Dave McGuire
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
David C. Kerber
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
Dave McGuire
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
Dave McGuire
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
DJ Delorie
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
der Mouse
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
Dave McGuire
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
DJ Delorie
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
Dave McGuire
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
David C. Kerber
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
Michael Sokolov
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
Michael Sokolov
- gEDA-user: Building the PCB+GL branch [WAS: Re: Open GL survey (for PCB)]
DJ Delorie
- gEDA-user: gwave: building on openSUSE, various comments
Werner Hoch
- gEDA-user: new symbols
Stefan Salewski
- gEDA-user: new symbols
Oliver Lehmann
- gEDA-user: new symbols
Stefan Salewski
- gEDA-user: new symbols
Oliver Lehmann
- gEDA-user: label printing
Levente Kovacs
- gEDA-user: gEDA new home on the 'net and other good changes...
Ales Hvezda
- gEDA-user: gEDA new home on the 'net and other good changes...
Ethan Swint
- gEDA-user: gEDA new home on the 'net and other good changes...
Dave N6NZ
- gEDA-user: gEDA new home on the 'net and other good changes...
Bert Timmerman
- gEDA-user: gwave: building on openSUSE, various comments
Werner Hoch
- gEDA-user: What is the logic in gnetlist/spice-sdb when to add a 'X' prefix to an identifier?
Christoph Lechner
- gEDA-user: What is the logic in gnetlist/spice-sdb when to add a 'X' prefix to an identifier?
al davis
- gEDA-user: What is the logic in gnetlist/spice-sdb when to add a 'X' prefix to an identifier?
Christoph Lechner
- gEDA-user: What is the logic in gnetlist/spice-sdb when to add a 'X' prefix to an identifier?
Stuart Brorson
- gEDA-user: What is the logic in gnetlist/spice-sdb when to add a 'X' prefix to an identifier?
al davis
- gEDA-user: new symbols
Oliver Lehmann
- gEDA-user: What is the logic in gnetlist/spice-sdb when to add a 'X' prefix to an identifier?
Christoph Lechner
- gEDA-user: Standard symbol for mechanical items?
Ben Jackson
- gEDA-user: Standard symbol for mechanical items?
Dave N6NZ
- gEDA-user: Standard symbol for mechanical items?
Bert Timmerman
- gEDA-user: gEDA new home on the 'net and other good changes...
Gabriel Paubert
- gEDA-user: Problems cloning from git.gpleda.org
gdedwards at blueyonder.co.uk
- gEDA-user: gEDA new home on the 'net and other good changes...
Kai-Martin Knaak
- gEDA-user: Is gedasymbols.org going to switch to git, too?
John Griessen
- gEDA-user: select all pins
Patrick Dupre
- gEDA-user: select all pins
John Griessen
- gEDA-user: gEDA new home on the 'net and other good changes...
DJ Delorie
- gEDA-user: select all pins
Kai-Martin Knaak
- gEDA-user: schematic driven gnucap work flow gaps
John Griessen
- gEDA-user: gwave: building on openSUSE, various comments
Werner Hoch
- gEDA-user: Yet another footprint generator available
Stefan Salewski
- gEDA-user: Yet another footprint generator available
DJ Delorie
- gEDA-user: gEDA-dev: Polygon transparency
Peter Clifton
- gEDA-user: xgsch2pcb demo videos
Peter Clifton
- gEDA-user: gnetlist verilog back end gnet-verilog.scm
John Griessen
- gEDA-user: order of defparam vs. #(.) parameters in icarus
Matt Ettus
- gEDA-user: Problems cloning from git.gpleda.org
Ales Hvezda
- gEDA-user: Problems cloning from git.gpleda.org
Peter Clifton
- gEDA-user: gnetlist verilog back end gnet-verilog.scm
Paul Tan
- gEDA-user: Problems cloning from git.gpleda.org
gdedwards at blueyonder.co.uk
- gEDA-user: ground plan
Patrick Dupre
- gEDA-user: Problems cloning from git.gpleda.org
Ales Hvezda
- gEDA-user: Problems cloning from git.gpleda.org
gdedwards at blueyonder.co.uk
- gEDA-user: ground plan
Ethan Swint
- gEDA-user: ground plan
Gabriel Paubert
- gEDA-user: ground plan
Patrick Dupre
- gEDA-user: gnetlist verilog back end gnet-verilog.scm
John Griessen
- gEDA-user: ground plan
Dave N6NZ
- gEDA-user: ground plan
DJ Delorie
- gEDA-user: ground plan
Dave N6NZ
- gEDA-user: ground plan
John Griessen
- gEDA-user: ground plan
Duncan Drennan
- gEDA-user: gschem ignoring gafrc?
Matt Ettus
- gEDA-user: gschem ignoring gafrc?
Stefan Salewski
- gEDA-user: gschem ignoring gafrc?
Matt Ettus
- gEDA-user: gEDA-dev: PCB+GL + **fast polygons!**
Peter Clifton
- gEDA-user: order of defparam vs. #(.) parameters in icarus
Stephen Williams
- gEDA-user: gnetlist verilog back end gnet-verilog.scm
Mike Jarabek
- gEDA-user: how to export only part of the schematic into EPS?
Forrest Sheng Bao
- gEDA-user: hierarchy: I just don't get it
Ben Jackson
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Bert Timmerman
- gEDA-user: What is the logic in gnetlist/spice-sdb when to add a 'X' prefix to an identifier?
evan foss
- gEDA-user: Google SoC : Potential Candidate seeking Info
Aanjhan R
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Peter Clifton
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
gdedwards at blueyonder.co.uk
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Peter Clifton
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Peter Clifton
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Joshua Boyd
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
gdedwards at blueyonder.co.uk
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Peter Clifton
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Peter Clifton
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Larry Doolittle
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Peter Clifton
- gEDA-user: ground plan
Frank Miles
- gEDA-user: ground plan
DJ Delorie
- gEDA-user: ground plan
Kai-Martin Knaak
- gEDA-user: Google SoC : Potential Candidate seeking Info
Kai-Martin Knaak
- gEDA-user: Google SoC : Potential Candidate seeking Info
Stephen Williams
- gEDA-user: Design a keyboard with gschem/pcb
Ben Jackson
- gEDA-user: Design a keyboard with gschem/pcb
John Doty
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
gdedwards at blueyonder.co.uk
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Joshua Boyd
- gEDA-user: Importing board outline from .emn file
Neil Webster
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Peter Clifton
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Peter Clifton
- gEDA-user: pcb 20081128 hangs when loading element data paste buffer
Mike Crowe
- gEDA-user: pcb 20081128 hangs when loading element data paste buffer
DJ Delorie
- gEDA-user: hierarchy: I just don't get it
John Griessen
- gEDA-user: hierarchy: I just don't get it
Ben Jackson
- gEDA-user: PCB - How To Find A Component?
gene
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Gareth Edwards
- gEDA-user: Google SoC : Potential Candidate seeking Info
al davis
- gEDA-user: PCB - How To Find A Component?
Peter Clifton
- gEDA-user: PCB - How To Find A Component?
gene
- gEDA-user: pcb 20081128 hangs when loading element data paste buffer
Mike Crowe
- gEDA-user: Trace impedance calculations in PCB
Jeffrey Gregory
- gEDA-user: PCB - How To Find A Component?
John Griessen
- gEDA-user: Trace impedance calculations in PCB
John Griessen
- gEDA-user: Trace impedance calculations in PCB
al davis
- gEDA-user: Trace impedance calculations in PCB
Steve Meier
- gEDA-user: Trace impedance calculations in PCB
joe tarantino
- gEDA-user: PCB - How To Find A Component?
DJ Delorie
- gEDA-user: Trace impedance calculations in PCB
Edward Hennessy
- gEDA-user: Trace impedance calculations in PCB
al davis
- gEDA-user: Trace impedance calculations in PCB
Stuart Brorson
- gEDA-user: Trace impedance calculations in PCB
Stuart Brorson
- gEDA-user: Trace impedance calculations in PCB
Steven Michalske
- gEDA-user: Trace impedance calculations in PCB
Gabriel Paubert
- gEDA-user: Trace impedance calculations in PCB
Jeffrey Gregory
- gEDA-user: PCB - How To Find A Component?
Ben Jackson
- gEDA-user: Trace impedance calculations in PCB
KURT PETERS
- gEDA-user: Trace impedance calculations in PCB
Steven Michalske
- gEDA-user: PCB - How To Find A Component?
Bdale Garbee
- gEDA-user: Made a hierarchical netlister, would like to contribute to gEDA
Yamazaki R2
- gEDA-user: Made a hierarchical netlister, would like to contribute to gEDA
Peter Clifton
- gEDA-user: Made a hierarchical netlister, would like to contribute to gEDA
r
- gEDA-user: Trace impedance calculations in PCB
Dan McMahill
- gEDA-user: Trace impedance calculations in PCB
Jeffrey Gregory
- gEDA-user: PCB - How To Find A Component?
gene
- gEDA-user: PCB - How To Find A Component?
DJ Delorie
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Gareth Edwards
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Steven Michalske
- gEDA-user: PCB + GL latest (patch for indirect rendering support)
Peter Clifton
- gEDA-user: PCB | how to update the pcb, if a change is made to the schematic?
S. Aguinaga
- gEDA-user: PCB | how to update the pcb, if a change is made to the schematic?
Kai-Martin Knaak
- gEDA-user: PCB | how to update the pcb, if a change is made to the schematic?
Ben Jackson
- gEDA-user: fyi: program to enter spreadsheet contents into a Digi-Key web-order
Tim Hanson
- gEDA-user: fyi: program to enter spreadsheet contents into a Digi-Key web-order
DJ Delorie
- gEDA-user: PCB | how to update the pcb, if a change is made to the schematic?
Steven Michalske
- gEDA-user: fyi: program to enter spreadsheet contents into a Digi-Key web-order
Steven Michalske
- gEDA-user: fyi: program to enter spreadsheet contents into a Digi-Key web-order
evan foss
- gEDA-user: PCB | how to update the pcb, if a change is made to the schematic?
Dan McMahill
- gEDA-user: fyi: program to enter spreadsheet contents into a Digi-Key web-order
Steven Michalske
- gEDA-user: autogenerate documentation to track project progress
Chitlesh GOORAH
- gEDA-user: autogenerate documentation to track project progress
Stuart Brorson
- gEDA-user: autogenerate documentation to track project progress
Stuart Brorson
- gEDA-user: autogenerate documentation to track project progress
Dan McMahill
- gEDA-user: autogenerate documentation to track project progress
Bert Timmerman
- gEDA-user: fyi: program to enter spreadsheet contents into a Digi-Key web-order
Tim Hanson
- gEDA-user: autogenerate documentation to track project progress
Bert Timmerman
- gEDA-user: PCB - How To Find A Component?
gene
- gEDA-user: rats
gene
- gEDA-user: rats
DJ Delorie
- gEDA-user: PCB: Problems creating a ground plane and adding thermals
Susan Mackay
- gEDA-user: Interesting board defect
Eric Brombaugh
- gEDA-user: Interesting board defect
DJ Delorie
- gEDA-user: Interesting board defect
Eric Brombaugh
- gEDA-user: Interesting board defect
Kai-Martin Knaak
- gEDA-user: Google SoC : Potential Candidate seeking Info
Aanjhan R
- gEDA-user: Interesting board defect
Dave N6NZ
- gEDA-user: Interesting board defect
Ben Jackson
- gEDA-user: Interesting board defect
Kai-Martin Knaak
- gEDA-user: Interesting board defect
Eric Brombaugh
- gEDA-user: PCB: Problems creating a ground plane and adding thermals
Steven Michalske
- gEDA-user: Interesting board defect
Dylan Smith
- gEDA-user: autoconf and pcb
Peter Wiley-Cordone
- gEDA-user: autoconf and pcb
Peter Wiley-Cordone
- gEDA-user: autoconf and pcb
Stuart Brorson
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Denis Grelich
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Denis Grelich
- gEDA-user: Tutorial changes
Kai-Martin Knaak
- gEDA-user: vendor resource file and fab houses
Kai-Martin Knaak
- gEDA-user: Tutorial changes
John Doty
- gEDA-user: Google SoC : Potential Candidate seeking Info
Stephen Williams
- gEDA-user: Interesting board defect
Stefan Salewski
- gEDA-user: Tutorial changes
Stefan Salewski
- gEDA-user: Interesting board defect
Kai-Martin Knaak
- gEDA-user: autoconf and pcb
gdedwards at blueyonder.co.uk
- gEDA-user: Interesting board defect
Stefan Salewski
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Ben Jackson
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
DJ Delorie
- gEDA-user: Was there a major change to how power nets are handled in netlists?
Matt Ettus
- gEDA-user: Interesting board defect
Steven Michalske
- gEDA-user: PCB: Problems creating a ground plane and adding thermals
Susan Mackay
- gEDA-user: PCB: Problems creating a ground plane and adding thermals
Ben Jackson
- gEDA-user: PCB - How To Find A Component?
Bert Timmerman
- gEDA-user: pstoedit patch for the pcb driver
Dan McMahill
- gEDA-user: PCB - How To Find A Component?
DJ Delorie
- gEDA-user: Was there a major change to how power nets are handled in netlists?
Ales Hvezda
- gEDA-user: autoconf and pcb
Dave McGuire
- gEDA-user: Was there a major change to how power nets are handled in netlists?
Matt Ettus
- gEDA-user: Google SoC : Potential Candidate seeking Info
al davis
- gEDA-user: Google SoC : Potential Candidate seeking Info
al davis
- gEDA-user: autoconf and pcb
gdedwards at blueyonder.co.uk
- gEDA-user: djboxsym: vertical labels
DJ Delorie
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Denis Grelich
- gEDA-user: Interesting board defect
Dylan Smith
- gEDA-user: Google SoC : Potential Candidate seeking Info
John Doty
- gEDA-user: Was there a major change to how power nets are handled in netlists?
Ales Hvezda
- gEDA-user: PCB: Problems creating a ground plane and adding thermals
Kai-Martin Knaak
- gEDA-user: Interesting board defect
Kai-Martin Knaak
- gEDA-user: Interesting board defect
Gabriel Paubert
- gEDA-user: Google SoC : Potential Candidate seeking Info
Kai-Martin Knaak
- gEDA-user: Interesting board defect
Gabriel Paubert
- gEDA-user: more board fab discussion (was Re: Interesting board defect)
Larry Doolittle
- gEDA-user: Interesting board defect
Stefan Salewski
- gEDA-user: PCB step and repeat for hierarchy
carzrgr8 at optonline.net
- gEDA-user: more board fab discussion (was Re: Interesting board defect)
joe tarantino
- gEDA-user: Was there a major change to how power nets are handled in netlists?
Matt Ettus
- gEDA-user: PCB step and repeat for hierarchy
Ben Jackson
- gEDA-user: PCB step and repeat for hierarchy
DJ Delorie
- gEDA-user: Tutorial changes
Peter Clifton
- gEDA-user: PCB - How To Find A Component?
Bert Timmerman
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Peter Clifton
- gEDA-user: PCB step and repeat for hierarchy
John Griessen
- gEDA-user: Tutorial changes
Kai-Martin Knaak
- gEDA-user: PCB step and repeat for hierarchy
Kai-Martin Knaak
- gEDA-user: Interesting board defect
Kai-Martin Knaak
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Ben Jackson
- gEDA-user: PCB: Problems creating a ground plane and adding thermals
Susan Mackay
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Peter Clifton
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Ben Jackson
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Peter Clifton
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Peter Clifton
- gEDA-user: order of defparam vs. #(.) parameters in icarus
Matt Ettus
- gEDA-user: PCB step and repeat for hierarchy
gene
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Peter Clifton
- gEDA-user: Error compiling pcb from head repository when building docs
Peter Wiley-Cordone
- gEDA-user: Error compiling pcb from head repository when building docs
DJ Delorie
- gEDA-user: Error compiling pcb from head repository when building docs
Peter Wiley-Cordone
- gEDA-user: Was there a major change to how power nets are handled in netlists?
Ales Hvezda
- gEDA-user: Google SoC : Potential Candidate seeking Info
Dan McMahill
- gEDA-user: Google SoC : Potential Candidate seeking Info
Stuart Brorson
- gEDA-user: Google SoC : Potential Candidate seeking Info
Larry Doolittle
- gEDA-user: PCB and AM_MAINTAINER_MODE
Peter TB Brett
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Denis Grelich
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Peter Clifton
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Peter Clifton
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Denis Grelich
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Denis Grelich
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Peter Clifton
- gEDA-user: Another distilled polygon test-case [WAS: Re: GL pcb bugs and a question re the log/library window, gerber outline output]
Peter Clifton
- gEDA-user: Another distilled polygon test-case [WAS: Re: GL pcb bugs and a question re the log/library window, gerber outline output]
Peter Clifton
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Denis Grelich
- gEDA-user: GL pcb bugs and a question re the log/library window, gerber outline output
Peter Clifton
- gEDA-user: Digilent USB-JTAG and Lattice
Eric Winsor
- gEDA-user: Digilent USB-JTAG and Lattice
evan foss
- gEDA-user: Digilent USB-JTAG and Lattice
Eric Brombaugh
- gEDA-user: Compiling and installing gschem: "Failed to load default font."
Denis Grelich
- gEDA-user: Compiling and installing gschem: "Failed to load default font."
Peter Clifton
- gEDA-user: Ignite Boston 5 talk slides
Stuart Brorson
- gEDA-user: Compiling and installing gschem: "Failed to load default font."
Denis Grelich
- gEDA-user: Compiling and installing gschem: "Failed to load default font."
Peter Clifton
- gEDA-user: Compiling and installing gschem: "Failed to load default font."
Peter Clifton
- gEDA-user: gEDA training, March 26th Cambridge (UK)
Peter Clifton
- gEDA-user: Compiling and installing gschem: "Failed to load default font."
Denis Grelich
- gEDA-user: pick'n'place (XYRS) from pcb?
Mark Rages
- gEDA-user: pick'n'place (XYRS) from pcb?
Duncan Drennan
- gEDA-user: pick'n'place (XYRS) from pcb?
Duncan Drennan
- gEDA-user: Is there any workaround to attach a "pin" to a net without the :1 attached to it?
Yamazaki R2
- gEDA-user: Global vs local attributes with symbols
Yamazaki R2
- gEDA-user: Global vs local attributes with symbols
Peter Clifton
- gEDA-user: Global vs local attributes with symbols
John Doty
- gEDA-user: gEDA training, March 26th Cambridge (UK)
Shakthi Kannan
- gEDA-user: light bulb in gschem :-)
michalwd1979
- gEDA-user: light bulb in gschem :-)
Bert Timmerman
- gEDA-user: gEDA training, March 26th Cambridge (UK)
Peter Clifton
- gEDA-user: Ignite Boston 5 talk slides
gdedwards at blueyonder.co.uk
- gEDA-user: Ignite Boston 5 talk slides
Stuart Brorson
- gEDA-user: Ignite Boston 5 talk slides
Stuart Brorson
- gEDA-user: gEDA training, March 26th Cambridge (UK)
John Griessen
- gEDA-user: gEDA training, March 26th Cambridge (UK)
Peter Clifton
- [PATCH 02/12] misfix annoying decimals bug 1741659
Ineiev
- gEDA-user: Ignite Boston 5 talk slides
John Griessen
- [PATCH 03/12] misfix disappearing crosshair mark
Ineiev
- gEDA-user: pcb printing with action script
Kai-Martin Knaak
- gEDA-user: Tab holes in PCB
Rob Butts
- gEDA-user: Tab holes in PCB
Peter Clifton
- gEDA-user: libgd -- which programs uses it
Stefan Salewski
- gEDA-user: pcb printing with action script
DJ Delorie
- gEDA-user: libgd -- which programs uses it
Peter Clifton
- gEDA-user: PCB - How To Find A Component?
Kai-Martin Knaak
- gEDA-user: libgd -- which programs uses it
Stefan Salewski
- gEDA-user: Tab holes in PCB
joeft
- gEDA-user: Ignite Boston 5 talk slides
Jelle de Jong
- gEDA-user: gEDA training, March 26th Cambridge (UK)
Chitlesh GOORAH
- gEDA-user: Google SoC : Potential Candidate seeking Info
Kai-Martin Knaak
- gEDA-user: gattrib hacking (was: Re: libgd -- which programs uses it)
Gareth Edwards
- gEDA-user: Google SoC : Potential Candidate seeking Info
Felix Maier
- gEDA-user: Google SoC : Potential Candidate seeking Info
Felix Maier
- gEDA-user: gEDA training, March 26th Cambridge (UK)
Peter Clifton
- gEDA-user: Google SoC : Potential Candidate seeking Info
John P. Doty
- gEDA-user: gEDA training, March 26th Cambridge (UK)
Chitlesh GOORAH
- gEDA-user: gattrib hacking
John Griessen
- gEDA-user: PCB+GL Progress
Peter Clifton
- gEDA-user: PCB+GL Progress
Kai-Martin Knaak
- gEDA-user: PCB+GL Progress
Mark
- gEDA-user: PCB+GL Progress
Peter Clifton
- gEDA-user: gattrib hacking (was: Re: libgd -- which programs uses it)
Stuart Brorson
- gEDA-user: PCB+GL Progress
Mark
- gEDA-user: Read Garbage errors in gsch2pcb
Rob Butts
- gEDA-user: Read Garbage errors in gsch2pcb
Werner Hoch
- gEDA-user: Read Garbage errors in gsch2pcb
Rob Butts
- gEDA-user: Read Garbage errors in gsch2pcb
Bert Timmerman
- gEDA-user: Read Garbage errors in gsch2pcb
John Luciani
- gEDA-user: gEDA-dev: Have we to bundle gaf packages?
Stefan Salewski
- gEDA-user: Read Garbage errors in gsch2pcb
Rob Butts
- gEDA-user: Read Garbage errors in gsch2pcb
Ben Jackson
- gEDA-user: PCB+GL Progress
Kai-Martin Knaak
- gEDA-user: gEDA-dev: Have we to bundle gaf packages?
Dan McMahill
- gEDA-user: Read Garbage errors in gsch2pcb
Dan McMahill
- gEDA-user: Read Garbage errors in gsch2pcb
Ben Jackson
- gEDA-user: Question on scrolling behavior
smichalske at gmail.com
- gEDA-user: gEDA-dev: Have we to bundle gaf packages?
Stefan Salewski
- gEDA-user: PCB+GL Progress
Kai-Martin Knaak
- gEDA-user: How to achive ~90us delay on a digital line
Tamas Szabo
- gEDA-user: How to achive ~90us delay on a digital line
Ben Jackson
- gEDA-user: PCB+GL Progress
Peter Clifton
- gEDA-user: PCB+GL Progress
Peter Clifton
- gEDA-user: How to achive ~90us delay on a digital line
Tamas Szabo
- gEDA-user: Question on scrolling behavior
Peter Clifton
- gEDA-user: How to achive ~90us delay on a digital line
r
- gEDA-user: gnetlist backend for xml-bom generation
Mike Crowe
- gEDA-user: gEDA-dev: Have we to bundle gaf packages?
Stefan Salewski
- gEDA-user: gEDA-dev: Have we to bundle gaf packages?
Peter Clifton
- gEDA-user: gnetlist backend for xml-bom generation
Peter Clifton
- gEDA-user: How to achive ~90us delay on a digital line
Bob Paddock
- gEDA-user: gEDA-dev: Have we to bundle gaf packages?
Stefan Salewski
- gEDA-user: gnetlist backend for xml-bom generation
Peter Clifton
- gEDA-user: gEDA-dev: Have we to bundle gaf packages?
Peter Clifton
- gEDA-user: PCB+GL Progress
Peter Clifton
- gEDA-user: PCB+GL Progress
Peter Clifton
- gEDA-user: How to achive ~90us delay on a digital line
Dave McGuire
- gEDA-user: PCB+GL Progress
Kai-Martin Knaak
- gEDA-user: PCB+GL Progress
Kai-Martin Knaak
- gEDA-user: How to achive ~90us delay on a digital line
Bob Paddock
- gEDA-user: PCB+GL Progress
Peter Clifton
- gEDA-user: PCB+GL Progress
DJ Delorie
- gEDA-user: PCB+GL Progress
Peter Clifton
- gEDA-user: PCB+GL Progress
Peter Clifton
- gEDA-user: How to achive ~90us delay on a digital line
Steven Michalske
- gEDA-user: How to achive ~90us delay on a digital line
Dave McGuire
- gEDA-user: How to achive ~90us delay on a digital line
SZABO Tamas
- gEDA-user: How to achive ~90us delay on a digital line
gene
- gEDA-user: PCB+GL Progress
Ineiev
- gEDA-user: pcb printouts
Rob Butts
- gEDA-user: pcb printouts
John Griessen
- gEDA-user: PCB+GL Progress
Peter Clifton
- gEDA-user: PCB Polygon code (with r-tree speedups) triggers GCC bug...
Peter Clifton
- gEDA-user: PCB Polygon code (with r-tree speedups) triggers GCC bug...
Ethan Swint
- gEDA-user: PCB Polygon code (with r-tree speedups) triggers GCC bug...
der Mouse
- gEDA-user: PCB Polygon code (with r-tree speedups) triggers GCC bug...
Peter Clifton
- gEDA-user: PCB Polygon code (with r-tree speedups) triggers GCC bug...
Peter Clifton
- gEDA-user: PCB Polygon code (with r-tree speedups) triggers GCC bug...
Ethan Swint
- gEDA-user: PCB Polygon code (with r-tree speedups) triggers GCC bug...
der Mouse
- gEDA-user: PCB Polygon code (with r-tree speedups) triggers GCC bug...
Peter Clifton
- gEDA-user: PCB Polygon code (with r-tree speedups) triggers GCC bug...
Peter Clifton
- gEDA-user: PCB Polygon code (with r-tree speedups) triggers GCC bug...
DJ Delorie
- gEDA-user: PCB Polygon code (with r-tree speedups) triggers GCC bug...
der Mouse
- gEDA-user: PCB+GL Progress
Kai-Martin Knaak
- gEDA-user: PCB Polygon code (with r-tree speedups) triggers GCC bug...
DJ Delorie
- gEDA-user: PCB threads (was: PCB+GL Progress)
Ineiev
- gEDA-user: pcb printing with action script
Kai-Martin Knaak
- gEDA-user: pcb printing with action script
Kai-Martin Knaak
- gEDA-user: PCB drill helper
Wojciech Kazubski
- gEDA-user: PCB drill helper
Wojciech Kazubski
- gEDA-user: PCB drill helper
Wojciech Kazubski
- No subject
- No subject
- No subject
- No subject
- gEDA-user: PCB threads (was: PCB+GL Progress)
Peter Clifton
- gEDA-user: gnetlist backend for xml-bom generation
Mike Crowe
- gEDA-user: gnetlist backend for xml-bom generation
Peter TB Brett
- gEDA-user: Locked refdeses in pcb
Rob Butts
- gEDA-user: Locked refdeses in pcb
Ben Jackson
- gEDA-user: gnetlist backend for xml-bom generation
Mike Crowe
- gEDA-user: Locked refdeses in pcb
Rob Butts
- gEDA-user: Locked refdeses in pcb
Ben Jackson
- gEDA-user: Locked refdeses in pcb
Rob Butts
- gEDA-user: Locked refdeses in pcb
Ethan Swint
- gEDA-user: Locked refdeses in pcb
Rob Butts
- gEDA-user: PCB+GL Progress
Kai-Martin Knaak
- gEDA-user: Locked refdeses in pcb
Kai-Martin Knaak
- gEDA-user: Locked refdeses in pcb
Duncan Drennan
- gEDA-user: [PATCH 1/2][PCB] Rename all .cvsignore files to .gitignore
Peter Tyser
- gEDA-user: [PATCH 2/2][PCB] Update .gitignore files
Peter Tyser
- gEDA-user: PCB threads (was: PCB+GL Progress)
Ineiev
- gEDA-user: new tool: moserial
Dr. Michael J. Chudobiak
- gEDA-user: Stuart's gEDA Talk at Ignite 5 Boston
John Luciani
- gEDA-user: --disable-stroke
Stefan Salewski
- gEDA-user: PCB threads (was: PCB+GL Progress)
Peter Clifton
- gEDA-user: new tool: moserial
Levente Kovacs
- gEDA-user: new tool: moserial
Dr. Michael J. Chudobiak
- gEDA-user: Stuart's gEDA Talk at Ignite 5 Boston
Gene Heskett
- gEDA-user: new tool: moserial
Steven Michalske
- gEDA-user: PCB threads (was: PCB+GL Progress)
Ineiev
- gEDA-user: Meaning of --with-x for libgeda/gschem?
Stefan Salewski
- gEDA-user: Meaning of --with-x for libgeda/gschem?
Ineiev
- gEDA-user: Another gEDA-based project working
Eric Brombaugh
- gEDA-user: Another gEDA-based project working
Stefan Salewski
- gEDA-user: pcb printing with action script
Kai-Martin Knaak
- gEDA-user: pcb printing with action script
Peter TB Brett
- gEDA-user: Another gEDA-based project working
Dave McGuire
- gEDA-user: Another gEDA-based project working
Jelle de Jong
- gEDA-user: Another gEDA-based project working
Eric Brombaugh
- gEDA-user: removing components in gsch2pcb
Rob Butts
- gEDA-user: Another gEDA-based project working
Larry Doolittle
- gEDA-user: removing components in gsch2pcb
Kai-Martin Knaak
- gEDA-user: pcb printing with action script
Kai-Martin
- gEDA-user: pcb printing with action script
Kai-Martin
- gEDA-user: vhd2vl-2.2 released
Larry Doolittle
- gEDA-user: vhd2vl-2.2 released
Chitlesh GOORAH
- gEDA-user: new tool: moserial
Levente Kovacs
- gEDA-user: single-sided boards
Juergen Harms
- gEDA-user: single-sided boards
DJ Delorie
- gEDA-user: Do we need --enable-deprecated for guile 1.8.5 to compile libgeda 1.4.3?
Stefan Salewski
- gEDA-user: Orange annular rings in pcb?
Rob Butts
- gEDA-user: single-sided boards
Juergen Harms
- gEDA-user: Orange annular rings in pcb?
Stefan Salewski
- gEDA-user: Orange annular rings in pcb?
Bert Timmerman
- gEDA-user: single-sided boards
Kai-Martin Knaak
- gEDA-user: plug-ins and version information
Kai-Martin Knaak
- gEDA-user: Orange annular rings in pcb?
Dave N6NZ
- gEDA-user: single-sided boards
Stuart Brorson
- gEDA-user: Orange annular rings in pcb?
Ethan Swint
- gEDA-user: libgeda, should INSTALL mention dependency of pkg-conf?
Stefan Salewski
- gEDA-user: single-sided boards
Steven Michalske
- gEDA-user: Just one more remark
Stefan Salewski
- gEDA-user: single-sided boards
Wojciech Kazubski
- gEDA-user: Stupid symbol tricks
Ben Jackson
Last message date:
Sat Feb 28 19:51:12 EST 2009
Archived on: Thu Sep 30 10:13:25 EDT 2010
This archive was generated by
Pipermail 0.09 (Mailman edition).