October 2008 Archives by thread

Messages sorted by: [ subject ] [ author ] [ date ]
More info on this list...

Starting: Wed Oct 1 00:27:45 EDT 2008
Ending: Fri Oct 31 23:25:46 EDT 2008
Messages: 532

gEDA-user: Driving the netlist from PCB (instead of gschem) John Griessen
gEDA-user: Driving the netlist from PCB (instead of gschem) John Griessen
- gEDA-user: Driving the netlist from PCB (instead of gschem) Rick Collins
  - gEDA-user: Driving the netlist from PCB (instead of gschem) DJ Delorie
    - gEDA-user: Driving the netlist from PCB (instead of gschem) Rick Collins
    - gEDA-user: Driving the netlist from PCB (instead of gschem) DJ Delorie
    - gEDA-user: Driving the netlist from PCB (instead of gschem) Dave McGuire
    - gEDA-user: Driving the netlist from PCB (instead of gschem) DJ Delorie
    - gEDA-user: Driving the netlist from PCB (instead of gschem) Dave McGuire
    - gEDA-user: Driving the netlist from PCB (instead of gschem) Rick Collins
    - gEDA-user: [pcb] IPC 2581 standard (was Driving the netlist from PCB (instead of gschem)) Bert Timmerman
    - gEDA-user: Driving the netlist from PCB (instead of gschem) John Griessen
    - gEDA-user: Driving the netlist from PCB (instead of gschem) Peter TB Brett
    - gEDA-user: Driving the netlist from PCB (instead of gschem) Peter Clifton
gEDA-user: PCB can't find new footprints Richard Rasker
- gEDA-user: PCB can't find new footprints Kai-Martin Knaak
  - gEDA-user: PCB can't find new footprints Richard Rasker
    - gEDA-user: PCB can't find new footprints Ales Hvezda
    - gEDA-user: PCB can't find new footprints Richard Rasker
    - gEDA-user: PCB can't find new footprints Ales Hvezda
    - gEDA-user: PCB can't find new footprints -- SOLVED Richard Rasker
    - gEDA-user: PCB can't find new footprints -- SOLVED Steven Michalske
    - gEDA-user: PCB can't find new footprints Peter Clifton
    - gEDA-user: PCB can't find new footprints Richard Rasker
    - gEDA-user: (x)gsch2pcb question (was: PCB can't find new footprints) Richard Rasker
    - gEDA-user: (x)gsch2pcb question (was: PCB can't find new footprints) Stefan Salewski
    - gEDA-user: (x)gsch2pcb question (was: PCB can't find new footprints) Peter Clifton
    - gEDA-user: (x)gsch2pcb question (was: PCB can't find new footprints) Richard Rasker
    - gEDA-user: PCB can't find new footprints Stefan Salewski
    - gEDA-user: PCB can't find new footprints Kai-Martin Knaak
    - gEDA-user: Ground Flooding Kingston Co.
    - gEDA-user: Ground Flooding DJ Delorie
    - gEDA-user: Ground Flooding Peter Clifton
    - gEDA-user: Ground Flooding Dave N6NZ
    - gEDA-user: Ground Flooding Kai-Martin Knaak
gEDA-user: Attribute Promotion to Schematic Kipton Moravec
- gEDA-user: Attribute Promotion to Schematic Peter Clifton
  - gEDA-user: Attribute Promotion to Schematic Kipton Moravec
    - gEDA-user: Attribute Promotion to Schematic Peter Clifton
- gEDA-user: Attribute Promotion to Schematic Peter Clifton
- gEDA-user: pcb, crosshair snaps not to center of pads Stefan Salewski
  - gEDA-user: pcb, crosshair snaps not to center of pads Peter Clifton
    - gEDA-user: pcb, crosshair snaps not to center of pads Peter Clifton
gEDA-user: Problem breaking apart an element in the buffer tj
- gEDA-user: SF CVS working? (was: Problem breaking apart an element in the buffer) Ben Jackson
- gEDA-user: Thermal relief Ian Chapman
gEDA-user: Sourceforge Status Dan McMahill
- gEDA-user: pcb do not like mm too much Stefan Salewski
gEDA-user: Driving the netlist from PCB (instead of gschem) al davis
- gEDA-user: Syntax error in pcb file Neil Webster
  - gEDA-user: Syntax error in pcb file DJ Delorie
    - gEDA-user: Syntax error in pcb file Neil Webster
    - gEDA-user: Syntax error in pcb file Ben Jackson
    - gEDA-user: Syntax error in pcb file Stuart Brorson
    - gEDA-user: Syntax error in pcb file Neil Webster
  - gEDA-user: Syntax error in pcb file Ben Jackson
    - gEDA-user: Ground Flooding Kingston Co.
    - gEDA-user: Ground Flooding Peter Clifton
    - gEDA-user: Ground Flooding Steven Michalske
    - gEDA-user: Ground Flooding Peter Clifton
    - gEDA-user: Ground Flooding Peter Clifton
    - gEDA-user: Ground Flooding Steven Michalske
- gEDA-user: pcb bug, silk line is green Stefan Salewski
  - gEDA-user: pcb bug, silk line is green Richard Rasker
  - gEDA-user: pcb bug, silk line is green DJ Delorie
    - gEDA-user: pcb bug, silk line is green Stefan Salewski
    - gEDA-user: pcb bug, silk line is green DJ Delorie
    - gEDA-user: pcb bug, silk line is green Stefan Salewski
    - gEDA-user: pcb bug, silk line is green Stefan Salewski
    - gEDA-user: pcb bug, silk line is green DJ Delorie
    - gEDA-user: pcb bug, silk line is green John Luciani
gEDA-user: I am having problems making and installing. Kipton Moravec
- gEDA-user: I am having problems making and installing. Mike Jarabek
  - gEDA-user: I am having problems making and installing. Kipton Moravec
gEDA-user: selction only highlights one element tj
- gEDA-user: selction only highlights one element DJ Delorie
gEDA-user: Can't open default_font error in PCB Rob Butts
- gEDA-user: Can't open default_font error in PCB Rob Butts
- gEDA-user: Howto make solder mask extend equal for all pads in layout? Stefan Salewski
  - gEDA-user: Howto make solder mask extend equal for all pads in layout? DJ Delorie
    - gEDA-user: Howto make solder mask extend equal for all pads in layout? Stefan Salewski
    - gEDA-user: Howto make solder mask extend equal for all pads in layout? DJ Delorie
    - gEDA-user: Howto make solder mask extend equal for all pads in layout? Peter Clifton
    - gEDA-user: Howto make solder mask extend equal for all pads in layout? DJ Delorie
    - gEDA-user: Howto make solder mask extend equal for all pads in layout? Steven Michalske
    - gEDA-user: Howto make solder mask extend equal for all pads in layout? Peter Clifton
gEDA-user: openSUSE rpms (was: gEDA/gaf stable version 1.4.1-20080929 released!) Werner Hoch
gEDA-user: thoughts and comments after first PCB Duncan Drennan
- gEDA-user: thoughts and comments after first PCB Kai-Martin Knaak
- gEDA-user: thoughts and comments after first PCB Peter Clifton
gEDA-user: How to use common symbols on multiple computers using pcb Christian Wolf
- gEDA-user: How to use common symbols on multiple computers using pcb John Luciani
- gEDA-user: pcb, mm rounding issue Stefan Salewski
  - gEDA-user: pcb, mm rounding issue David Kuehling
    - gEDA-user: pcb, mm rounding issue DJ Delorie
  - gEDA-user: pcb, mm rounding issue Ineiev
    - gEDA-user: pcb, mm rounding issue Stefan Salewski
- gEDA-user: pcb, route style is not saved with layout Stefan Salewski
gEDA-user: gschem: How to connect two nets from different sheet Wojciech Zabolotny
- gEDA-user: gschem: How to connect two nets from different sheet Kai-Martin Knaak
gEDA-user: newbie library question Kai-Martin Knaak
- gEDA-user: newbie library question Richard Rasker
gEDA-user: How to set node 0 in gschem nikosapi
- gEDA-user: How to set node 0 in gschem DJ Delorie
  - gEDA-user: How to set node 0 in gschem nikosapi
- gEDA-user: How to set node 0 in gschem Werner Hoch
  - gEDA-user: How to set node 0 in gschem Stuart Brorson
- gEDA-user: pcb, howto get plain rats lines instead of circles Stefan Salewski
  - gEDA-user: pcb, howto get plain rats lines instead of circles Ben Jackson
    - gEDA-user: pcb, howto get plain rats lines instead of circles Stefan Salewski
    - gEDA-user: pcb, howto get plain rats lines instead of circles Peter Clifton
    - gEDA-user: pcb, howto get plain rats lines instead of circles DJ Delorie
    - gEDA-user: pcb, howto get plain rats lines instead of circles Stefan Salewski
    - gEDA-user: pcb, howto get plain rats lines instead of circles Stefan Salewski
    - gEDA-user: pcb, howto get plain rats lines instead of circles Bert Timmerman
    - gEDA-user: pcb, howto get plain rats lines instead of circles Bert Timmerman
    - gEDA-user: pcb, howto get plain rats lines instead of circles Stefan Salewski
    - gEDA-user: pcb, howto get plain rats lines instead of circles Ben Jackson
    - gEDA-user: pcb, howto get plain rats lines instead of circles Stefan Salewski
    - gEDA-user: pcb, howto get plain rats lines instead of circles Peter Clifton
    - gEDA-user: pcb, howto get plain rats lines instead of circles Peter Clifton
    - gEDA-user: pcb, howto get plain rats lines instead of circles Peter Clifton
    - gEDA-user: pcb, howto get plain rats lines instead of circles Peter Clifton
    - gEDA-user: pcb, howto get plain rats lines instead of circles Peter Clifton
    - gEDA-user: pcb, howto get plain rats lines instead of circles Ben Jackson
    - gEDA-user: pcb, howto get plain rats lines instead of circles Peter Clifton
  - gEDA-user: pcb, howto get plain rats lines instead of circles Bert Timmerman
    - gEDA-user: pcb, howto get plain rats lines instead of circles Stefan Salewski
gEDA-user: PCB Question Rob Butts
- gEDA-user: PCB Question Richard Rasker
  - gEDA-user: PCB Question DJ Delorie
    - gEDA-user: PCB Question Richard Rasker
gEDA-user: pnp symbol questions Rob Butts
gEDA-user: Dirty workaraound. Was: gschem: How to connect two nets from different sheet Wojciech Zabolotny
- [PATCH] Fix IsPointInBox to work with wide as well as tall boxes Peter Clifton
- [PATCH] Make rats to polygons work for arbitrary clipped shapes Peter Clifton
- gEDA-user: Belated announcement of gerbv-2.1.0 release! Stuart Brorson
gEDA-user: PCB Universe John Luciani
gEDA-user: Is there any way to cover pads with solder mask? Greg Bengeult
- gEDA-user: Is there any way to cover pads with solder mask? John Luciani
  - gEDA-user: Is there any way to cover pads with solder mask? David Kuehling
gEDA-user: Trouble with an usb oscilloscope Robas, Teodor
- gEDA-user: Trouble with an usb oscilloscope Eric Winsor
  - gEDA-user: Trouble with an usb oscilloscope Robas, Teodor
- gEDA-user: Trouble with an usb oscilloscope Joerg
- gEDA-user: Trouble with an usb oscilloscope Joerg
  - gEDA-user: Trouble with an usb oscilloscope Robas, Teodor
    - gEDA-user: Trouble with an usb oscilloscope Joerg
- gEDA-user: PCB to IGES converstion? Mike Crowe
  - gEDA-user: PCB to IGES converstion? Bert Timmerman
    - gEDA-user: PCB to IGES converstion? Mike Crowe
    - gEDA-user: PCB to IGES converstion? Bert Timmerman
gEDA-user: cannot compile gwave2 wing
- gEDA-user: cannot compile gwave2 Peter Clifton
  - gEDA-user: cannot compile gwave2 wing
    - gEDA-user: cannot compile gwave2 Peter Clifton
    - gEDA-user: cannot compile gwave2 Peter Clifton
gEDA-user: PCB routing question Rob Butts
- gEDA-user: PCB routing question DJ Delorie
- gEDA-user: PCB routing question Ben Jackson
gEDA-user: Gschem symbol for parallax propeller chip Jim Qode
- gEDA-user: Gschem symbol for parallax propeller chip Peter Clifton
gEDA-user: slot, pinnumber and pinseq attributes - how to work with them? Alexander Gvozdev
- gEDA-user: slot, pinnumber and pinseq attributes - how to work with them? DJ Delorie
  - gEDA-user: slot, pinnumber and pinseq attributes - how to work with them? Alexander Gvozdev
    - gEDA-user: slot, pinnumber and pinseq attributes - how to work with them? DJ Delorie
    - gEDA-user: slot, pinnumber and pinseq attributes - how to work with them? Peter Clifton
    - gEDA-user: slot, pinnumber and pinseq attributes - how to work with them? Alexander Gvozdev
- gEDA-user: pcb, next minor pad snapping bug Stefan Salewski
  - gEDA-user: pcb, next minor pad snapping bug Peter Clifton
gEDA-user: gnucap development snapshot 2008-10-10 al davis
gEDA-user: OT BitScope? Ibai egurrola
gEDA-user: PCB captures 'Mod4/Windows' key bioe007list at hotmail.com
- gEDA-user: PCB captures 'Mod4/Windows' key Peter Clifton
  - gEDA-user: PCB captures 'Mod4/Windows' key Dan McMahill
    - gEDA-user: PCB captures 'Mod4/Windows' key Peter Clifton
- gEDA-user: gschem libraries not connected in ubuntu dyovemy02 at sneakemail.com
  - gEDA-user: gschem libraries not connected in ubuntu Peter Clifton
- gEDA-user: pcb, route styles of layers Stefan Salewski
  - gEDA-user: pcb, route styles of layers Peter Clifton
    - gEDA-user: pcb, route styles of layers Stefan Salewski
    - gEDA-user: pcb, route styles of layers Steven Michalske
    - gEDA-user: pcb, route styles of layers Kai-Martin Knaak
- gEDA-user: gschem libraries not connected in ubuntu dyovemy02 at sneakemail.com
  - gEDA-user: gschem libraries not connected in ubuntu Peter Clifton
  - gEDA-user: gschem libraries not connected in ubuntu Joerg
gEDA-user: Using the MovePointer() command in PCB Simon Clubley
- gEDA-user: pcb, connecting to lonesome vias if Auto enforce DRC clearance is on Stefan Salewski
  - gEDA-user: pcb, connecting to lonesome vias if Auto enforce DRC clearance is on Ben Jackson
    - gEDA-user: pcb, connecting to lonesome vias if Auto enforce DRC clearance is on Steven Michalske
gEDA-user: TQFP footprint questions Rob Butts
- gEDA-user: TQFP footprint questions Ben Jackson
- gEDA-user: TQFP footprint questions DJ Delorie
  - gEDA-user: TQFP footprint questions John Griessen
- gEDA-user: TQFP footprint questions Dan McMahill
gEDA-user: pcb's xy-files and gerbv David Kuehling
gEDA-user: gEDA for terminal strip layout? Steve M. Robbins
- gEDA-user: gEDA for terminal strip layout? Joerg
  - gEDA-user: gEDA for terminal strip layout? Peter Clifton
    - gEDA-user: gEDA for terminal strip layout? Joerg
- gEDA-user: How to make a symbol short two nets was: (gEDA for terminal strip layout?) John Griessen
  - gEDA-user: How to make a symbol short two nets was: (gEDA for terminal strip layout?) Steve M. Robbins
    - gEDA-user: How to make a symbol short two nets was: (gEDA for terminal strip layout?) Joerg
- gEDA-user: gEDA for terminal strip layout? John Griessen
- gEDA-user: pcb, next mm issue Stefan Salewski
gEDA-user: turn off pin numbers in gschem Duncan Drennan
gEDA-user: improve PNG output quality Duncan Drennan
- gEDA-user: improve PNG output quality Peter Clifton
  - gEDA-user: improve PNG output quality Duncan Drennan
    - gEDA-user: improve PNG output quality Peter Clifton
    - gEDA-user: improve PNG output quality Kai-Martin Knaak
    - gEDA-user: improve PNG output quality John Luciani
    - gEDA-user: improve PNG output quality Stefan Salewski
    - gEDA-user: improve PNG output quality Duncan Drennan
    - gEDA-user: improve PNG output quality Joerg
    - gEDA-user: improve PNG output quality Stefan Salewski
    - gEDA-user: improve PNG output quality Joerg
    - gEDA-user: improve PNG output quality Stefan Salewski
    - gEDA-user: improve PNG output quality Dave McGuire
    - gEDA-user: improve PNG output quality Joerg
    - gEDA-user: improve PNG output quality Stefan Salewski
    - gEDA-user: improve PNG output quality Joerg
    - gEDA-user: improve PNG output quality Dave McGuire
    - gEDA-user: improve PNG output quality Joerg
    - gEDA-user: improve PNG output quality Dave McGuire
    - gEDA-user: improve PNG output quality Peter TB Brett
    - gEDA-user: improve PNG output quality Joerg
    - gEDA-user: improve PNG output quality John Doty
    - gEDA-user: improve PNG output quality Joerg
    - gEDA-user: improve PNG output quality Peter TB Brett
    - gEDA-user: improve PNG output quality Joerg
    - gEDA-user: improve PNG output quality Joerg
  - gEDA-user: improve PNG output quality Ben Jackson
    - gEDA-user: improve PNG output quality Peter Clifton
    - gEDA-user: Tips for using gEDA on the MAC Peter Wiley-Cordone
    - gEDA-user: Tips for using gEDA on the MAC Stuart Brorson
    - gEDA-user: Tips for using gEDA on the MAC Dave McGuire
    - gEDA-user: Tips for using gEDA on the MAC Peter Wiley-Cordone
    - gEDA-user: Tips for using gEDA on the MAC al davis
    - gEDA-user: Tips for using gEDA on the MAC John Doty
gEDA-user: Looking for some Atmel symbols Peter Carlsson
- gEDA-user: Looking for some Atmel symbols DJ Delorie
  - gEDA-user: Looking for some Atmel symbols Dave N6NZ
  - gEDA-user: Looking for some Atmel symbols Stefan Salewski
gEDA-user: Newbie -- How to properly associate DNI or Do Not Populate to component bbruce888
- gEDA-user: Newbie -- How to properly associate DNI or Do Not Populate to component Peter Clifton
  - gEDA-user: Newbie -- How to properly associate DNI or Do Not Populate to component Duncan Drennan
    - gEDA-user: Newbie -- How to properly associate DNI or Do Not Populate to component joe tarantino
    - gEDA-user: Newbie -- How to properly associate DNI or Do Not Populate to component Duncan Drennan
gEDA-user: improve PNG output quality Wojciech Kazubski
gEDA-user: SFP modules to FPGA Larry Doolittle
- gEDA-user: SFP modules to FPGA Marvin Dickens
  - gEDA-user: SFP modules to FPGA Larry Doolittle
gEDA-user: Component rotation in PCB michalwd1979
- gEDA-user: Component rotation in PCB Dave N6NZ
  - gEDA-user: Component rotation in PCB michalwd1979
  - gEDA-user: PCB cvs - library preview problem michalwd1979
    - gEDA-user: PCB cvs - library preview problem Peter Clifton
    - gEDA-user: PCB cvs - library preview problem Peter Clifton
    - gEDA-user: PCB cvs - library preview problem michalwd1979
- gEDA-user: Component rotation in PCB DJ Delorie
  - gEDA-user: Component rotation in PCB Kai-Martin Knaak
gEDA-user: Component rotation in PCB michalwd1979
gEDA-user: About polygon clearances Eduardo Santana
- gEDA-user: About polygon clearances DJ Delorie
gEDA-user: bom2 fails with stack overflow Kai-Martin Knaak
- gEDA-user: bom2 fails with stack overflow Carlos Nieves Ónega
  - gEDA-user: bom2 fails with stack overflow (solved) Kai-Martin Knaak
- gEDA-user: pcb, question to crosshair to grid snapping Stefan Salewski
  - gEDA-user: pcb, question to crosshair to grid snapping joe tarantino
    - gEDA-user: pcb, question to crosshair to grid snapping Stefan Salewski
gEDA-user: Looking for some Atmel symbols Peter Carlsson
- gEDA-user: Looking for some Atmel symbols DJ Delorie
gEDA-user: Looking for some Atmel symbols Peter Carlsson
gEDA-user: Subject: Re: Looking for some Atmel symbols Peter Carlsson
gEDA-user: component count in bom2 Kai-Martin Knaak
gEDA-user: RouteStyle() does not update the GUI radio buttons Simon Clubley
gEDA-user: External attribute read/write - how? Frank Miles
- gEDA-user: External attribute read/write - how? Steve Meier
gEDA-user: "Publication Quality" Schematic Symbols Mark Rages
gEDA-user: D-subminiature straddle-the-board PCB footprint Mark Rages
- gEDA-user: D-subminiature straddle-the-board PCB footprint Joerg
- gEDA-user: D-subminiature straddle-the-board PCB footprint Ben Jackson
gEDA-user: pcb mouse bindings Duncan Drennan
- gEDA-user: pcb mouse bindings DJ Delorie
- gEDA-user: pcb mouse bindings Peter Clifton
  - gEDA-user: pcb mouse bindings Duncan Drennan
    - gEDA-user: pcb mouse bindings Peter Clifton
- gEDA-user: pcb, strange line tool bug Stefan Salewski
  - gEDA-user: pcb, strange line tool bug DJ Delorie
    - gEDA-user: pcb, strange line tool bug Stefan Salewski
    - gEDA-user: pcb, strange line tool bug Stefan Salewski
    - gEDA-user: pcb, strange line tool bug Steven Michalske
    - gEDA-user: pcb, strange line tool bug Peter Clifton
    - gEDA-user: pcb, strange line tool bug DJ Delorie
    - gEDA-user: pcb, strange line tool bug Peter Clifton
    - gEDA-user: pcb, strange line tool bug Mark Rages
gEDA-user: External attribute read/write - how? Frank Miles
gEDA-user: home made pcb final check Rob Butts
- gEDA-user: home made pcb final check DJ Delorie
  - gEDA-user: home made pcb final check Joerg
    - gEDA-user: home made pcb final check DJ Delorie
    - gEDA-user: home made pcb final check Joerg
gEDA-user: A few questions about gschem, gnetlist, and gspiceui/ngspice Yamazaki R2
- gEDA-user: A few questions about gschem, gnetlist, and gspiceui/ngspice Kai-Martin Knaak
- gEDA-user: A few questions about gschem, gnetlist, and gspiceui/ngspice Bas Gieltjes
  - gEDA-user: A few questions about gschem, gnetlist, and gspiceui/ngspice Steve Meier
    - gEDA-user: A few questions about gschem, gnetlist, and gspiceui/ngspice John Doty
- gEDA-user: A few questions about gschem, gnetlist, and gspiceui/ngspice al davis
gEDA-user: errors compiling gEDA 1.4.1 on cygwin Duncan Drennan
- gEDA-user: errors compiling gEDA 1.4.1 on cygwin John Griessen
- gEDA-user: errors compiling gEDA 1.4.1 on cygwin Peter Clifton
  - gEDA-user: errors compiling gEDA 1.4.1 on cygwin Duncan Drennan
gEDA-user: error when building gEDA/gaf 1.4.1.20080929 on FreeBSD Jon
- gEDA-user: error when building gEDA/gaf 1.4.1.20080929 on FreeBSD Duncan Drennan
  - gEDA-user: error when building gEDA/gaf 1.4.1.20080929 on FreeBSD Jon
- gEDA-user: *FIXED* Re: error when building gEDA/gaf 1.4.1.20080929 on FreeBSD Jon
gEDA-user: Problems with gsch2pcb_tutorial Kipton Moravec
gEDA-user: Problems rotating and mirroring. Kipton Moravec
- gEDA-user: Problems rotating and mirroring. Kipton Moravec
gEDA-user: "Reproducible Research - Studies in Open Source Hardware Design" highlights gEDA Bob Paddock
- gEDA-user: "Reproducible Research - Studies in Open Source Hardware Design" highlights gEDA Ales Hvezda
gEDA-user: trouble with DRC checker Mark Rages
- gEDA-user: trouble with DRC checker DJ Delorie
  - gEDA-user: trouble with DRC checker Ben Jackson
  - gEDA-user: trouble with DRC checker Mark Rages
gEDA-user: Is it possible to prevent geda tools from creating log files? Yamazaki R2
gEDA-user: I am doing something wrong in PCB Kipton Moravec
- gEDA-user: I am doing something wrong in PCB Kipton Moravec
gEDA-user: Is there a directory of footprints for PCB? Kipton Moravec
- gEDA-user: Is there a directory of footprints for PCB? Peter Clifton
- gEDA-user: Is there a directory of footprints for PCB? John Luciani
- gEDA-user: Is there a directory of footprints for PCB? John Griessen
gEDA-user: gattrib text size Duncan Drennan
- gEDA-user: Free Dog gathering on Thursday Nov 6th in Reading, MA! Stuart Brorson
- gEDA-user: pcb, howto partition power planes? Stefan Salewski
  - gEDA-user: pcb, howto partition power planes? Joerg
    - gEDA-user: pcb, howto partition power planes? DJ Delorie
    - gEDA-user: pcb, howto partition power planes? Larry Doolittle
    - gEDA-user: pcb, howto partition power planes? DJ Delorie
    - gEDA-user: pcb, howto partition power planes? Larry Doolittle
    - gEDA-user: pcb, howto partition power planes? DJ Delorie
    - gEDA-user: pcb, howto partition power planes? Larry Doolittle
    - gEDA-user: pcb, howto partition power planes? DJ Delorie
    - gEDA-user: pcb, howto partition power planes? Joerg
    - gEDA-user: pcb, howto partition power planes? Larry Doolittle
    - gEDA-user: pcb, howto partition power planes? DJ Delorie
    - gEDA-user: pcb, howto partition power planes? John Luciani
    - gEDA-user: pcb, howto partition power planes? DJ Delorie
    - gEDA-user: pcb, howto partition power planes? John Luciani
    - gEDA-user: pcb, howto partition power planes? DJ Delorie
    - gEDA-user: pcb, howto partition power planes? John Luciani
    - gEDA-user: pcb, howto partition power planes? DJ Delorie
    - gEDA-user: pcb, howto partition power planes? Larry Doolittle
    - gEDA-user: pcb, howto partition power planes? John Griessen
    - gEDA-user: pcb, howto partition power planes? David C. Kerber
    - gEDA-user: pcb, howto partition power planes? DJ Delorie
    - gEDA-user: pcb, howto partition power planes? Joerg
    - gEDA-user: pcb, howto partition power planes? Dave McGuire
    - gEDA-user: pcb, howto partition power planes? Joerg
    - gEDA-user: pcb, howto partition power planes? Dave McGuire
    - gEDA-user: pcb, howto partition power planes? Steve Meier
    - gEDA-user: pcb, howto partition power planes? Dave McGuire
    - gEDA-user: pcb, howto partition power planes? Joerg
    - gEDA-user: pcb, howto partition power planes? DJ Delorie
    - gEDA-user: pcb, howto partition power planes? Steve Meier
    - gEDA-user: pcb, howto partition power planes? DJ Delorie
    - gEDA-user: pcb, howto partition power planes? Eric Brombaugh
    - gEDA-user: pcb, howto partition power planes? DJ Delorie
    - gEDA-user: pcb, howto partition power planes? Dave McGuire
    - gEDA-user: pcb, howto partition power planes? Joerg
    - gEDA-user: pcb, howto partition power planes? Mark Rages
    - gEDA-user: pcb, howto partition power planes? DJ Delorie
    - gEDA-user: pcb, howto partition power planes? Ben Jackson
    - gEDA-user: pcb, howto partition power planes? Joerg
    - gEDA-user: pcb, howto partition power planes? Steve Meier
    - gEDA-user: pcb, howto partition power planes? John Griessen
    - gEDA-user: pcb, howto partition power planes? Larry Doolittle
    - gEDA-user: pcb, howto partition power planes? Martin Maney
    - gEDA-user: pcb, howto partition power planes? Stuart Brorson
    - gEDA-user: pcb, howto partition power planes? Joerg
    - gEDA-user: pcb, howto partition power planes? Steve Meier
    - gEDA-user: pcb, howto partition power planes? Steve Meier
    - gEDA-user: pcb, howto partition power planes? Steve Meier
    - gEDA-user: pcb, howto partition power planes? Dave McGuire
    - gEDA-user: pcb, howto partition power planes? Steve Meier
    - gEDA-user: pcb, howto partition power planes? Eric Winsor
    - gEDA-user: pcb, howto partition power planes? Steven Michalske
    - gEDA-user: pcb, howto partition power planes? Steve Meier
    - gEDA-user: pcb, howto partition power planes? Steve Meier
    - gEDA-user: pcb, howto partition power planes? Steven Michalske
- gEDA-user: pcb, polygon dead copper removal question Stefan Salewski
  - gEDA-user: pcb, polygon dead copper removal question Peter Clifton
gEDA-user: Printing schematics to files Rob Butts
- gEDA-user: Printing schematics to files John Luciani
  - gEDA-user: Printing schematics to files Peter TB Brett
    - gEDA-user: Printing schematics to files Stefan Salewski
    - gEDA-user: Printing schematics to files Kai-Martin Knaak
    - gEDA-user: Printing schematics to files Duncan Drennan
    - gEDA-user: Printing schematics to files Kai-Martin Knaak
    - gEDA-user: Printing schematics to files Duncan Drennan
- gEDA-user: pcb: arbitrary footprint rotations Sean D'Epagnier
  - gEDA-user: pcb: arbitrary footprint rotations DJ Delorie
    - gEDA-user: gEDA-dev: pcb: arbitrary footprint rotations Peter TB Brett
gEDA-user: On/Off sheet nets in multi-page schematic Rob Butts
- gEDA-user: On/Off sheet nets in multi-page schematic John Griessen
  - gEDA-user: On/Off sheet nets in multi-page schematic DJ Delorie
gEDA-user: board's setup and output Eduardo Santana
- gEDA-user: board's setup and output DJ Delorie
gEDA-user: Size of symbols Peter Carlsson
- gEDA-user: Size of symbols John Luciani
- gEDA-user: Size of symbols DJ Delorie
gEDA-user: View->Displayed element name->Value Eduardo Santana
- gEDA-user: View->Displayed element name->Value Peter Clifton
  - gEDA-user: View->Displayed element name->Value Eduardo Santana
gEDA-user: powermeter board, with less ground planes :-) DJ Delorie
- gEDA-user: powermeter board, with less ground planes :-) Joerg
  - gEDA-user: powermeter board, with less ground planes :-) DJ Delorie
    - gEDA-user: powermeter board, with less ground planes :-) Joerg
    - gEDA-user: powermeter board, with less ground planes :-) DJ Delorie
    - gEDA-user: powermeter board, with less ground planes :-) Joerg
    - gEDA-user: powermeter board, with less ground planes :-) DJ Delorie
    - gEDA-user: powermeter board, with less ground planes :-) Joerg
    - gEDA-user: powermeter board, with less ground planes :-) Peter TB Brett
    - gEDA-user: powermeter board, with less ground planes :-) Joerg
    - gEDA-user: powermeter board, with less ground planes :-) Bob Paddock
    - gEDA-user: powermeter board, with less ground planes :-) DJ Delorie
  - gEDA-user: powermeter board, with less ground planes :-) Bob Paddock
    - gEDA-user: powermeter board, with less ground planes :-) Steve Meier
    - gEDA-user: powermeter board, with less ground planes :-) Bob Paddock
    - gEDA-user: powermeter board, with less ground planes :-) Steve Meier
    - gEDA-user: powermeter board, with less ground planes :-) DJ Delorie
    - gEDA-user: powermeter board, with less ground planes :-) Joerg
    - gEDA-user: powermeter board, with less ground planes :-) Bob Paddock
    - gEDA-user: powermeter board, with less ground planes :-) Joerg
    - gEDA-user: powermeter board, with less ground planes :-) DJ Delorie
    - gEDA-user: powermeter board, with less ground planes :-) Steve Meier
    - gEDA-user: powermeter board, with less ground planes :-) Eric Brombaugh
gEDA-user: Hiding power pins in schematic symbols? Frank Miles
- gEDA-user: Hiding power pins in schematic symbols? John Luciani
  - gEDA-user: Hiding power pins in schematic symbols? Kai-Martin Knaak
    - gEDA-user: Hiding power pins in schematic symbols? Dave N6NZ
- gEDA-user: Hiding power pins in schematic symbols? Dave N6NZ
gEDA-user: Autonumbering in multi-page schematic Rob Butts
- gEDA-user: Autonumbering in multi-page schematic Rob Butts
gEDA-user: Hiding power pins in schematic symbols? Frank Miles

Last message date: Fri Oct 31 23:25:46 EDT 2008
Archived on: Fri Jan 15 17:01:21 EST 2010

Messages sorted by: [ subject ] [ author ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).