October 2008 Archives by author
Starting: Wed Oct 1 00:27:45 EDT 2008
Ending: Fri Oct 31 23:25:46 EDT 2008
Messages: 532
- gEDA-user: Is there any way to cover pads with solder mask?
Greg Bengeult
- gEDA-user: Driving the netlist from PCB (instead of gschem)
Peter TB Brett
- gEDA-user: turn off pin numbers in gschem
Peter TB Brett
- gEDA-user: turn off pin numbers in gschem
Peter TB Brett
- gEDA-user: improve PNG output quality
Peter TB Brett
- gEDA-user: improve PNG output quality
Peter TB Brett
- gEDA-user: improve PNG output quality
Peter TB Brett
- gEDA-user: improve PNG output quality
Peter TB Brett
- gEDA-user: component count in bom2
Peter TB Brett
- gEDA-user: External attribute read/write - how?
Peter TB Brett
- gEDA-user: Problems with gsch2pcb_tutorial
Peter TB Brett
- gEDA-user: Printing schematics to files
Peter TB Brett
- gEDA-user: gEDA-dev: pcb: arbitrary footprint rotations
Peter TB Brett
- gEDA-user: Size of symbols
Peter TB Brett
- gEDA-user: powermeter board, with less ground planes :-)
Peter TB Brett
- gEDA-user: pcb, howto partition power planes?
Eric Brombaugh
- gEDA-user: powermeter board, with less ground planes :-)
Eric Brombaugh
- gEDA-user: Syntax error in pcb file
Stuart Brorson
- gEDA-user: How to set node 0 in gschem
Stuart Brorson
- gEDA-user: Belated announcement of gerbv-2.1.0 release!
Stuart Brorson
- gEDA-user: Tips for using gEDA on the MAC
Stuart Brorson
- gEDA-user: gattrib text size
Stuart Brorson
- gEDA-user: Free Dog gathering on Thursday Nov 6th in Reading, MA!
Stuart Brorson
- gEDA-user: gattrib text size
Stuart Brorson
- gEDA-user: pcb, howto partition power planes?
Stuart Brorson
- gEDA-user: Can't open default_font error in PCB
Rob Butts
- gEDA-user: Can't open default_font error in PCB
Rob Butts
- gEDA-user: PCB Question
Rob Butts
- gEDA-user: pnp symbol questions
Rob Butts
- gEDA-user: pnp symbol questions
Rob Butts
- gEDA-user: pnp symbol questions
Rob Butts
- gEDA-user: PCB routing question
Rob Butts
- gEDA-user: TQFP footprint questions
Rob Butts
- gEDA-user: home made pcb final check
Rob Butts
- gEDA-user: Printing schematics to files
Rob Butts
- gEDA-user: On/Off sheet nets in multi-page schematic
Rob Butts
- gEDA-user: Autonumbering in multi-page schematic
Rob Butts
- gEDA-user: Autonumbering in multi-page schematic
Rob Butts
- gEDA-user: Looking for some Atmel symbols
Peter Carlsson
- gEDA-user: Looking for some Atmel symbols
Peter Carlsson
- gEDA-user: Looking for some Atmel symbols
Peter Carlsson
- gEDA-user: Subject: Re: Looking for some Atmel symbols
Peter Carlsson
- gEDA-user: Size of symbols
Peter Carlsson
- gEDA-user: Thermal relief
Ian Chapman
- gEDA-user: PCB can't find new footprints
Peter Clifton
- gEDA-user: Ground Flooding
Peter Clifton
- gEDA-user: Driving the netlist from PCB (instead of gschem)
Peter Clifton
- gEDA-user: Attribute Promotion to Schematic
Peter Clifton
- gEDA-user: Attribute Promotion to Schematic
Peter Clifton
- gEDA-user: Attribute Promotion to Schematic
Peter Clifton
- gEDA-user: pcb, crosshair snaps not to center of pads
Peter Clifton
- gEDA-user: pcb, crosshair snaps not to center of pads
Peter Clifton
- gEDA-user: Ground Flooding
Peter Clifton
- gEDA-user: (x)gsch2pcb question (was: PCB can't find new footprints)
Peter Clifton
- gEDA-user: Ground Flooding
Peter Clifton
- gEDA-user: Ground Flooding
Peter Clifton
- gEDA-user: Ground Flooding
Peter Clifton
- gEDA-user: Howto make solder mask extend equal for all pads in layout?
Peter Clifton
- gEDA-user: thoughts and comments after first PCB
Peter Clifton
- gEDA-user: Howto make solder mask extend equal for all pads in layout?
Peter Clifton
- gEDA-user: pcb, howto get plain rats lines instead of circles
Peter Clifton
- gEDA-user: pcb, howto get plain rats lines instead of circles
Peter Clifton
- gEDA-user: pcb, howto get plain rats lines instead of circles
Peter Clifton
- [PATCH] Fix IsPointInBox to work with wide as well as tall boxes
Peter Clifton
- gEDA-user: pcb, howto get plain rats lines instead of circles
Peter Clifton
- [PATCH] Make rats to polygons work for arbitrary clipped shapes
Peter Clifton
- gEDA-user: pcb, howto get plain rats lines instead of circles
Peter Clifton
- gEDA-user: pcb, howto get plain rats lines instead of circles
Peter Clifton
- gEDA-user: pcb, howto get plain rats lines instead of circles
Peter Clifton
- gEDA-user: cannot compile gwave2
Peter Clifton
- gEDA-user: Gschem symbol for parallax propeller chip
Peter Clifton
- gEDA-user: cannot compile gwave2
Peter Clifton
- gEDA-user: cannot compile gwave2
Peter Clifton
- gEDA-user: slot, pinnumber and pinseq attributes - how to work with them?
Peter Clifton
- gEDA-user: pcb, next minor pad snapping bug
Peter Clifton
- gEDA-user: PCB captures 'Mod4/Windows' key
Peter Clifton
- gEDA-user: gschem libraries not connected in ubuntu
Peter Clifton
- gEDA-user: pcb, route styles of layers
Peter Clifton
- gEDA-user: gschem libraries not connected in ubuntu
Peter Clifton
- gEDA-user: gEDA for terminal strip layout?
Peter Clifton
- gEDA-user: improve PNG output quality
Peter Clifton
- gEDA-user: improve PNG output quality
Peter Clifton
- gEDA-user: improve PNG output quality
Peter Clifton
- gEDA-user: PCB captures 'Mod4/Windows' key
Peter Clifton
- gEDA-user: Newbie -- How to properly associate DNI or Do Not Populate to component
Peter Clifton
- gEDA-user: PCB cvs - library preview problem
Peter Clifton
- gEDA-user: PCB cvs - library preview problem
Peter Clifton
- gEDA-user: pcb mouse bindings
Peter Clifton
- gEDA-user: pcb, strange line tool bug
Peter Clifton
- gEDA-user: errors compiling gEDA 1.4.1 on cygwin
Peter Clifton
- gEDA-user: pcb, strange line tool bug
Peter Clifton
- gEDA-user: pcb mouse bindings
Peter Clifton
- gEDA-user: Is there a directory of footprints for PCB?
Peter Clifton
- gEDA-user: gattrib text size
Peter Clifton
- gEDA-user: pcb, polygon dead copper removal question
Peter Clifton
- gEDA-user: View->Displayed element name->Value
Peter Clifton
- gEDA-user: Using the MovePointer() command in PCB
Simon Clubley
- gEDA-user: RouteStyle() does not update the GUI radio buttons
Simon Clubley
- gEDA-user: Ground Flooding
Kingston Co.
- gEDA-user: Ground Flooding
Kingston Co.
- gEDA-user: Ground Flooding
Kingston Co.
- gEDA-user: Driving the netlist from PCB (instead of gschem)
Rick Collins
- gEDA-user: Driving the netlist from PCB (instead of gschem)
Rick Collins
- gEDA-user: Driving the netlist from PCB (instead of gschem)
Rick Collins
- gEDA-user: PCB to IGES converstion?
Mike Crowe
- gEDA-user: PCB to IGES converstion?
Mike Crowe
- gEDA-user: External attribute read/write - how?
Mike Crowe
- gEDA-user: pcb: arbitrary footprint rotations
Sean D'Epagnier
- gEDA-user: Driving the netlist from PCB (instead of gschem)
DJ Delorie
- gEDA-user: Driving the netlist from PCB (instead of gschem)
DJ Delorie
- gEDA-user: Driving the netlist from PCB (instead of gschem)
DJ Delorie
- gEDA-user: Ground Flooding
DJ Delorie
- gEDA-user: Ground Flooding
DJ Delorie
- gEDA-user: Syntax error in pcb file
DJ Delorie
- gEDA-user: pcb bug, silk line is green
DJ Delorie
- gEDA-user: pcb bug, silk line is green
DJ Delorie
- gEDA-user: selction only highlights one element
DJ Delorie
- gEDA-user: pcb bug, silk line is green
DJ Delorie
- gEDA-user: Can't open default_font error in PCB
DJ Delorie
- gEDA-user: Howto make solder mask extend equal for all pads in layout?
DJ Delorie
- gEDA-user: Howto make solder mask extend equal for all pads in layout?
DJ Delorie
- gEDA-user: Howto make solder mask extend equal for all pads in layout?
DJ Delorie
- gEDA-user: How to set node 0 in gschem
DJ Delorie
- gEDA-user: pcb, mm rounding issue
DJ Delorie
- gEDA-user: pcb, howto get plain rats lines instead of circles
DJ Delorie
- gEDA-user: PCB Question
DJ Delorie
- gEDA-user: PCB routing question
DJ Delorie
- gEDA-user: slot, pinnumber and pinseq attributes - how to work with them?
DJ Delorie
- gEDA-user: slot, pinnumber and pinseq attributes - how to work with them?
DJ Delorie
- gEDA-user: TQFP footprint questions
DJ Delorie
- gEDA-user: Looking for some Atmel symbols
DJ Delorie
- gEDA-user: Component rotation in PCB
DJ Delorie
- gEDA-user: Looking for some Atmel symbols
DJ Delorie
- gEDA-user: About polygon clearances
DJ Delorie
- gEDA-user: pcb mouse bindings
DJ Delorie
- gEDA-user: pcb, strange line tool bug
DJ Delorie
- gEDA-user: home made pcb final check
DJ Delorie
- gEDA-user: home made pcb final check
DJ Delorie
- gEDA-user: pcb, strange line tool bug
DJ Delorie
- gEDA-user: trouble with DRC checker
DJ Delorie
- gEDA-user: Is there a directory of footprints for PCB?
DJ Delorie
- gEDA-user: pcb, howto partition power planes?
DJ Delorie
- gEDA-user: pcb, howto partition power planes?
DJ Delorie
- gEDA-user: pcb, howto partition power planes?
DJ Delorie
- gEDA-user: pcb, howto partition power planes?
DJ Delorie
- gEDA-user: pcb, howto partition power planes?
DJ Delorie
- gEDA-user: pcb: arbitrary footprint rotations
DJ Delorie
- gEDA-user: pcb, howto partition power planes?
DJ Delorie
- gEDA-user: pcb, howto partition power planes?
DJ Delorie
- gEDA-user: pcb, howto partition power planes?
DJ Delorie
- gEDA-user: pcb, howto partition power planes?
DJ Delorie
- gEDA-user: pcb, howto partition power planes?
DJ Delorie
- gEDA-user: pcb, howto partition power planes?
DJ Delorie
- gEDA-user: On/Off sheet nets in multi-page schematic
DJ Delorie
- gEDA-user: board's setup and output
DJ Delorie
- gEDA-user: pcb, howto partition power planes?
DJ Delorie
- gEDA-user: pcb, howto partition power planes?
DJ Delorie
- gEDA-user: Size of symbols
DJ Delorie
- gEDA-user: Size of symbols
DJ Delorie
- gEDA-user: powermeter board, with less ground planes :-)
DJ Delorie
- gEDA-user: powermeter board, with less ground planes :-)
DJ Delorie
- gEDA-user: powermeter board, with less ground planes :-)
DJ Delorie
- gEDA-user: powermeter board, with less ground planes :-)
DJ Delorie
- gEDA-user: powermeter board, with less ground planes :-)
DJ Delorie
- gEDA-user: powermeter board, with less ground planes :-)
DJ Delorie
- gEDA-user: powermeter board, with less ground planes :-)
DJ Delorie
- gEDA-user: powermeter board, with less ground planes :-)
DJ Delorie
- gEDA-user: SFP modules to FPGA
Marvin Dickens
- gEDA-user: SFP modules to FPGA
Larry Doolittle
- gEDA-user: SFP modules to FPGA
Larry Doolittle
- gEDA-user: pcb, howto partition power planes?
Larry Doolittle
- gEDA-user: pcb, howto partition power planes?
Larry Doolittle
- gEDA-user: pcb, howto partition power planes?
Larry Doolittle
- gEDA-user: pcb, howto partition power planes?
Larry Doolittle
- gEDA-user: pcb, howto partition power planes?
Larry Doolittle
- gEDA-user: pcb, howto partition power planes?
Larry Doolittle
- gEDA-user: gschem: How to connect two nets from different sheet
John Doty
- gEDA-user: gschem: How to connect two nets from different sheet
John Doty
- gEDA-user: Tips for using gEDA on the MAC
John Doty
- gEDA-user: improve PNG output quality
John Doty
- gEDA-user: External attribute read/write - how?
John Doty
- gEDA-user: External attribute read/write - how?
John Doty
- gEDA-user: A few questions about gschem, gnetlist, and gspiceui/ngspice
John Doty
- gEDA-user: Is there a directory of footprints for PCB?
John Doty
- gEDA-user: Size of symbols
John Doty
- gEDA-user: Size of symbols
John Doty
- gEDA-user: Can't open default_font error in PCB
Duncan Drennan
- gEDA-user: thoughts and comments after first PCB
Duncan Drennan
- gEDA-user: turn off pin numbers in gschem
Duncan Drennan
- gEDA-user: improve PNG output quality
Duncan Drennan
- gEDA-user: improve PNG output quality
Duncan Drennan
- gEDA-user: improve PNG output quality
Duncan Drennan
- gEDA-user: Newbie -- How to properly associate DNI or Do Not Populate to component
Duncan Drennan
- gEDA-user: Newbie -- How to properly associate DNI or Do Not Populate to component
Duncan Drennan
- gEDA-user: pcb mouse bindings
Duncan Drennan
- gEDA-user: errors compiling gEDA 1.4.1 on cygwin
Duncan Drennan
- gEDA-user: error when building gEDA/gaf 1.4.1.20080929 on FreeBSD
Duncan Drennan
- gEDA-user: pcb mouse bindings
Duncan Drennan
- gEDA-user: errors compiling gEDA 1.4.1 on cygwin
Duncan Drennan
- gEDA-user: gattrib text size
Duncan Drennan
- gEDA-user: gattrib text size
Duncan Drennan
- gEDA-user: pcb, howto partition power planes?
Duncan Drennan
- gEDA-user: Printing schematics to files
Duncan Drennan
- gEDA-user: Printing schematics to files
Duncan Drennan
- gEDA-user: A few questions about gschem, gnetlist, and gspiceui/ngspice
Bas Gieltjes
- gEDA-user: Is there a directory of footprints for PCB?
Jesse Gordon
- gEDA-user: Driving the netlist from PCB (instead of gschem)
John Griessen
- gEDA-user: Driving the netlist from PCB (instead of gschem)
John Griessen
- gEDA-user: Driving the netlist from PCB (instead of gschem)
John Griessen
- gEDA-user: pnp symbol questions
John Griessen
- gEDA-user: TQFP footprint questions
John Griessen
- gEDA-user: How to make a symbol short two nets was: (gEDA for terminal strip layout?)
John Griessen
- gEDA-user: gEDA for terminal strip layout?
John Griessen
- gEDA-user: errors compiling gEDA 1.4.1 on cygwin
John Griessen
- gEDA-user: Is there a directory of footprints for PCB?
John Griessen
- gEDA-user: Is there a directory of footprints for PCB?
John Griessen
- gEDA-user: On/Off sheet nets in multi-page schematic
John Griessen
- gEDA-user: pcb, howto partition power planes?
John Griessen
- gEDA-user: pcb, howto partition power planes?
John Griessen
- gEDA-user: slot, pinnumber and pinseq attributes - how to work with them?
Alexander Gvozdev
- gEDA-user: slot, pinnumber and pinseq attributes - how to work with them?
Alexander Gvozdev
- gEDA-user: slot, pinnumber and pinseq attributes - how to work with them?
Alexander Gvozdev
- gEDA-user: openSUSE rpms (was: gEDA/gaf stable version 1.4.1-20080929 released!)
Werner Hoch
- gEDA-user: How to set node 0 in gschem
Werner Hoch
- gEDA-user: PCB can't find new footprints
Ales Hvezda
- gEDA-user: PCB can't find new footprints
Ales Hvezda
- gEDA-user: "Reproducible Research - Studies in Open Source Hardware Design" highlights gEDA
Ales Hvezda
- gEDA-user: pcb, mm rounding issue
Ineiev
- gEDA-user: SF CVS working? (was: Problem breaking apart an element in the buffer)
Ben Jackson
- gEDA-user: Syntax error in pcb file
Ben Jackson
- gEDA-user: Syntax error in pcb file
Ben Jackson
- gEDA-user: pcb, howto get plain rats lines instead of circles
Ben Jackson
- gEDA-user: pcb, howto get plain rats lines instead of circles
Ben Jackson
- gEDA-user: pcb, howto get plain rats lines instead of circles
Ben Jackson
- gEDA-user: PCB routing question
Ben Jackson
- gEDA-user: pcb, connecting to lonesome vias if Auto enforce DRC clearance is on
Ben Jackson
- gEDA-user: TQFP footprint questions
Ben Jackson
- gEDA-user: improve PNG output quality
Ben Jackson
- gEDA-user: D-subminiature straddle-the-board PCB footprint
Ben Jackson
- gEDA-user: trouble with DRC checker
Ben Jackson
- gEDA-user: pcb, howto partition power planes?
Ben Jackson
- gEDA-user: I am having problems making and installing.
Mike Jarabek
- gEDA-user: Trouble with an usb oscilloscope
Joerg
- gEDA-user: Trouble with an usb oscilloscope
Joerg
- gEDA-user: Trouble with an usb oscilloscope
Joerg
- gEDA-user: gschem libraries not connected in ubuntu
Joerg
- gEDA-user: gEDA for terminal strip layout?
Joerg
- gEDA-user: gEDA for terminal strip layout?
Joerg
- gEDA-user: improve PNG output quality
Joerg
- gEDA-user: improve PNG output quality
Joerg
- gEDA-user: improve PNG output quality
Joerg
- gEDA-user: improve PNG output quality
Joerg
- gEDA-user: How to make a symbol short two nets was: (gEDA for terminal strip layout?)
Joerg
- gEDA-user: improve PNG output quality
Joerg
- gEDA-user: improve PNG output quality
Joerg
- gEDA-user: improve PNG output quality
Joerg
- gEDA-user: improve PNG output quality
Joerg
- gEDA-user: improve PNG output quality
Joerg
- gEDA-user: improve PNG output quality
Joerg
- gEDA-user: D-subminiature straddle-the-board PCB footprint
Joerg
- gEDA-user: home made pcb final check
Joerg
- gEDA-user: home made pcb final check
Joerg
- gEDA-user: pcb, howto partition power planes?
Joerg
- gEDA-user: pcb, howto partition power planes?
Joerg
- gEDA-user: pcb, howto partition power planes?
Joerg
- gEDA-user: pcb, howto partition power planes?
Joerg
- gEDA-user: pcb, howto partition power planes?
Joerg
- gEDA-user: pcb, howto partition power planes?
Joerg
- gEDA-user: pcb, howto partition power planes?
Joerg
- gEDA-user: pcb, howto partition power planes?
Joerg
- gEDA-user: powermeter board, with less ground planes :-)
Joerg
- gEDA-user: powermeter board, with less ground planes :-)
Joerg
- gEDA-user: powermeter board, with less ground planes :-)
Joerg
- gEDA-user: powermeter board, with less ground planes :-)
Joerg
- gEDA-user: powermeter board, with less ground planes :-)
Joerg
- gEDA-user: powermeter board, with less ground planes :-)
Joerg
- gEDA-user: powermeter board, with less ground planes :-)
Joerg
- gEDA-user: error when building gEDA/gaf 1.4.1.20080929 on FreeBSD
Jon
- gEDA-user: error when building gEDA/gaf 1.4.1.20080929 on FreeBSD
Jon
- gEDA-user: *FIXED* Re: error when building gEDA/gaf 1.4.1.20080929 on FreeBSD
Jon
- gEDA-user: improve PNG output quality
Wojciech Kazubski
- gEDA-user: pcb, howto partition power planes?
David C. Kerber
- gEDA-user: PCB can't find new footprints
Kai-Martin Knaak
- gEDA-user: Ground Flooding
Kai-Martin Knaak
- gEDA-user: PCB can't find new footprints
Kai-Martin Knaak
- gEDA-user: thoughts and comments after first PCB
Kai-Martin Knaak
- gEDA-user: gschem: How to connect two nets from different sheet
Kai-Martin Knaak
- gEDA-user: newbie library question
Kai-Martin Knaak
- gEDA-user: pcb, route styles of layers
Kai-Martin Knaak
- gEDA-user: bom2 fails with stack overflow
Kai-Martin Knaak
- gEDA-user: About polygon clearances
Kai-Martin Knaak
- gEDA-user: bom2 fails with stack overflow (solved)
Kai-Martin Knaak
- gEDA-user: Component rotation in PCB
Kai-Martin Knaak
- gEDA-user: improve PNG output quality
Kai-Martin Knaak
- gEDA-user: component count in bom2
Kai-Martin Knaak
- gEDA-user: component count in bom2
Kai-Martin Knaak
- gEDA-user: A few questions about gschem, gnetlist, and gspiceui/ngspice
Kai-Martin Knaak
- gEDA-user: I am doing something wrong in PCB
Kai-Martin Knaak
- gEDA-user: pcb, howto partition power planes?
Kai-Martin Knaak
- gEDA-user: pcb, howto partition power planes?
Kai-Martin Knaak
- gEDA-user: Printing schematics to files
Kai-Martin Knaak
- gEDA-user: Printing schematics to files
Kai-Martin Knaak
- gEDA-user: Hiding power pins in schematic symbols?
Kai-Martin Knaak
- gEDA-user: pcb, mm rounding issue
David Kuehling
- gEDA-user: How to use common symbols on multiple computers using pcb
David Kuehling
- gEDA-user: Is there any way to cover pads with solder mask?
David Kuehling
- gEDA-user: pcb's xy-files and gerbv
David Kuehling
- gEDA-user: pcb bug, silk line is green
John Luciani
- gEDA-user: How to use common symbols on multiple computers using pcb
John Luciani
- gEDA-user: PCB Universe
John Luciani
- gEDA-user: Is there any way to cover pads with solder mask?
John Luciani
- gEDA-user: improve PNG output quality
John Luciani
- gEDA-user: "Publication Quality" Schematic Symbols
John Luciani
- gEDA-user: Is there a directory of footprints for PCB?
John Luciani
- gEDA-user: Printing schematics to files
John Luciani
- gEDA-user: pcb, howto partition power planes?
John Luciani
- gEDA-user: pcb, howto partition power planes?
John Luciani
- gEDA-user: pcb, howto partition power planes?
John Luciani
- gEDA-user: Size of symbols
John Luciani
- gEDA-user: Hiding power pins in schematic symbols?
John Luciani
- gEDA-user: pcb, howto partition power planes?
Martin Maney
- gEDA-user: Driving the netlist from PCB (instead of gschem)
Dave McGuire
- gEDA-user: Driving the netlist from PCB (instead of gschem)
Dave McGuire
- gEDA-user: Tips for using gEDA on the MAC
Dave McGuire
- gEDA-user: improve PNG output quality
Dave McGuire
- gEDA-user: improve PNG output quality
Dave McGuire
- gEDA-user: improve PNG output quality
Dave McGuire
- gEDA-user: "Publication Quality" Schematic Symbols
Dave McGuire
- gEDA-user: pcb, howto partition power planes?
Dave McGuire
- gEDA-user: pcb, howto partition power planes?
Dave McGuire
- gEDA-user: pcb, howto partition power planes?
Dave McGuire
- gEDA-user: pcb, howto partition power planes?
Dave McGuire
- gEDA-user: Size of symbols
Dave McGuire
- gEDA-user: Size of symbols
Dave McGuire
- gEDA-user: Size of symbols
Dave McGuire
- gEDA-user: Size of symbols
Dave McGuire
- gEDA-user: pcb, howto partition power planes?
Dave McGuire
- gEDA-user: Sourceforge Status
Dan McMahill
- gEDA-user: PCB captures 'Mod4/Windows' key
Dan McMahill
- gEDA-user: TQFP footprint questions
Dan McMahill
- gEDA-user: External attribute read/write - how?
Steve Meier
- gEDA-user: External attribute read/write - how?
Steve Meier
- gEDA-user: A few questions about gschem, gnetlist, and gspiceui/ngspice
Steve Meier
- gEDA-user: pcb, howto partition power planes?
Steve Meier
- gEDA-user: pcb, howto partition power planes?
Steve Meier
- gEDA-user: pcb, howto partition power planes?
Steve Meier
- gEDA-user: pcb, howto partition power planes?
Steve Meier
- gEDA-user: pcb, howto partition power planes?
Steve Meier
- gEDA-user: On/Off sheet nets in multi-page schematic
Steve Meier
- gEDA-user: pcb, howto partition power planes?
Steve Meier
- gEDA-user: pcb, howto partition power planes?
Steve Meier
- gEDA-user: pcb, howto partition power planes?
Steve Meier
- gEDA-user: Size of symbols
Steve Meier
- gEDA-user: pcb, howto partition power planes?
Steve Meier
- gEDA-user: pcb, howto partition power planes?
Steve Meier
- gEDA-user: pcb, howto partition power planes?
Steve Meier
- gEDA-user: powermeter board, with less ground planes :-)
Steve Meier
- gEDA-user: powermeter board, with less ground planes :-)
Steve Meier
- gEDA-user: powermeter board, with less ground planes :-)
Steve Meier
- gEDA-user: pcb, crosshair snaps not to center of pads
Steven Michalske
- gEDA-user: PCB can't find new footprints -- SOLVED
Steven Michalske
- gEDA-user: Ground Flooding
Steven Michalske
- gEDA-user: Ground Flooding
Steven Michalske
- gEDA-user: Can't open default_font error in PCB
Steven Michalske
- gEDA-user: Howto make solder mask extend equal for all pads in layout?
Steven Michalske
- gEDA-user: How to use common symbols on multiple computers using pcb
Steven Michalske
- gEDA-user: How to use common symbols on multiple computers using pcb
Steven Michalske
- gEDA-user: pcb, connecting to lonesome vias if Auto enforce DRC clearance is on
Steven Michalske
- gEDA-user: pcb, route styles of layers
Steven Michalske
- gEDA-user: pcb, strange line tool bug
Steven Michalske
- gEDA-user: pcb, howto partition power planes?
Steven Michalske
- gEDA-user: pcb, howto partition power planes?
Steven Michalske
- gEDA-user: powermeter board, with less ground planes :-)
Steven Michalske
- gEDA-user: External attribute read/write - how?
Frank Miles
- gEDA-user: External attribute read/write - how?
Frank Miles
- gEDA-user: Hiding power pins in schematic symbols?
Frank Miles
- gEDA-user: Hiding power pins in schematic symbols?
Frank Miles
- gEDA-user: Attribute Promotion to Schematic
Kipton Moravec
- gEDA-user: Attribute Promotion to Schematic
Kipton Moravec
- gEDA-user: I am having problems making and installing.
Kipton Moravec
- gEDA-user: I am having problems making and installing.
Kipton Moravec
- gEDA-user: Problems with gsch2pcb_tutorial
Kipton Moravec
- gEDA-user: Problems rotating and mirroring.
Kipton Moravec
- gEDA-user: Problems rotating and mirroring.
Kipton Moravec
- gEDA-user: I am doing something wrong in PCB
Kipton Moravec
- gEDA-user: I am doing something wrong in PCB
Kipton Moravec
- gEDA-user: I am doing something wrong in PCB
Kipton Moravec
- gEDA-user: I am doing something wrong in PCB
Kipton Moravec
- gEDA-user: Is there a directory of footprints for PCB?
Kipton Moravec
- gEDA-user: Is there a directory of footprints for PCB?
Kipton Moravec
- gEDA-user: Ground Flooding
Dave N6NZ
- gEDA-user: Looking for some Atmel symbols
Dave N6NZ
- gEDA-user: Component rotation in PCB
Dave N6NZ
- gEDA-user: Hiding power pins in schematic symbols?
Dave N6NZ
- gEDA-user: Hiding power pins in schematic symbols?
Dave N6NZ
- gEDA-user: "Reproducible Research - Studies in Open Source Hardware Design" highlights gEDA
Bob Paddock
- gEDA-user: powermeter board, with less ground planes :-)
Bob Paddock
- gEDA-user: powermeter board, with less ground planes :-)
Bob Paddock
- gEDA-user: powermeter board, with less ground planes :-)
Bob Paddock
- gEDA-user: powermeter board, with less ground planes :-)
Bob Paddock
- gEDA-user: Gschem symbol for parallax propeller chip
Jim Qode
- gEDA-user: A few questions about gschem, gnetlist, and gspiceui/ngspice
Yamazaki R2
- gEDA-user: Is it possible to prevent geda tools from creating log files?
Yamazaki R2
- gEDA-user: "Publication Quality" Schematic Symbols
Mark Rages
- gEDA-user: D-subminiature straddle-the-board PCB footprint
Mark Rages
- gEDA-user: pcb, strange line tool bug
Mark Rages
- gEDA-user: trouble with DRC checker
Mark Rages
- gEDA-user: trouble with DRC checker
Mark Rages
- gEDA-user: pcb, howto partition power planes?
Mark Rages
- gEDA-user: PCB can't find new footprints
Richard Rasker
- gEDA-user: PCB can't find new footprints
Richard Rasker
- gEDA-user: PCB can't find new footprints
Richard Rasker
- gEDA-user: PCB can't find new footprints
Richard Rasker
- gEDA-user: PCB can't find new footprints -- SOLVED
Richard Rasker
- gEDA-user: (x)gsch2pcb question (was: PCB can't find new footprints)
Richard Rasker
- gEDA-user: (x)gsch2pcb question (was: PCB can't find new footprints)
Richard Rasker
- gEDA-user: pcb bug, silk line is green
Richard Rasker
- gEDA-user: newbie library question
Richard Rasker
- gEDA-user: PCB Question
Richard Rasker
- gEDA-user: PCB Question
Richard Rasker
- gEDA-user: Trouble with an usb oscilloscope
Robas, Teodor
- gEDA-user: Trouble with an usb oscilloscope
Robas, Teodor
- gEDA-user: Trouble with an usb oscilloscope
Robas, Teodor
- gEDA-user: gEDA for terminal strip layout?
Steve M. Robbins
- gEDA-user: How to make a symbol short two nets was: (gEDA for terminal strip layout?)
Steve M. Robbins
- gEDA-user: PCB can't find new footprints
Stefan Salewski
- gEDA-user: pcb, crosshair snaps not to center of pads
Stefan Salewski
- gEDA-user: pcb, crosshair snaps not to center of pads
Stefan Salewski
- gEDA-user: (x)gsch2pcb question (was: PCB can't find new footprints)
Stefan Salewski
- gEDA-user: pcb do not like mm too much
Stefan Salewski
- gEDA-user: pcb bug, silk line is green
Stefan Salewski
- gEDA-user: pcb bug, silk line is green
Stefan Salewski
- gEDA-user: pcb bug, silk line is green
Stefan Salewski
- gEDA-user: pcb bug, silk line is green
Stefan Salewski
- gEDA-user: Howto make solder mask extend equal for all pads in layout?
Stefan Salewski
- gEDA-user: Howto make solder mask extend equal for all pads in layout?
Stefan Salewski
- gEDA-user: pcb, mm rounding issue
Stefan Salewski
- gEDA-user: pcb, route style is not saved with layout
Stefan Salewski
- gEDA-user: gschem: How to connect two nets from different sheet
Stefan Salewski
- gEDA-user: gschem: How to connect two nets from different sheet
Stefan Salewski
- gEDA-user: pcb, howto get plain rats lines instead of circles
Stefan Salewski
- gEDA-user: pcb, howto get plain rats lines instead of circles
Stefan Salewski
- gEDA-user: pcb, howto get plain rats lines instead of circles
Stefan Salewski
- gEDA-user: pnp symbol questions
Stefan Salewski
- gEDA-user: pcb, mm rounding issue
Stefan Salewski
- gEDA-user: pnp symbol questions
Stefan Salewski
- gEDA-user: pcb, howto get plain rats lines instead of circles
Stefan Salewski
- gEDA-user: pcb, howto get plain rats lines instead of circles
Stefan Salewski
- gEDA-user: pnp symbol questions
Stefan Salewski
- gEDA-user: pcb, howto get plain rats lines instead of circles
Stefan Salewski
- gEDA-user: pcb, howto get plain rats lines instead of circles
Stefan Salewski
- gEDA-user: gschem: How to connect two nets from different sheet
Stefan Salewski
- gEDA-user: pcb, next minor pad snapping bug
Stefan Salewski
- gEDA-user: pcb, route styles of layers
Stefan Salewski
- gEDA-user: pcb, route styles of layers
Stefan Salewski
- gEDA-user: pcb, connecting to lonesome vias if Auto enforce DRC clearance is on
Stefan Salewski
- gEDA-user: pcb, next mm issue
Stefan Salewski
- gEDA-user: pcb, next mm issue
Stefan Salewski
- gEDA-user: pcb, next mm issue
Stefan Salewski
- gEDA-user: improve PNG output quality
Stefan Salewski
- gEDA-user: turn off pin numbers in gschem
Stefan Salewski
- gEDA-user: Looking for some Atmel symbols
Stefan Salewski
- gEDA-user: improve PNG output quality
Stefan Salewski
- gEDA-user: pcb, question to crosshair to grid snapping
Stefan Salewski
- gEDA-user: About polygon clearances
Stefan Salewski
- gEDA-user: improve PNG output quality
Stefan Salewski
- gEDA-user: improve PNG output quality
Stefan Salewski
- gEDA-user: Subject: Re: Looking for some Atmel symbols
Stefan Salewski
- gEDA-user: pcb, question to crosshair to grid snapping
Stefan Salewski
- gEDA-user: RouteStyle() does not update the GUI radio buttons
Stefan Salewski
- gEDA-user: pcb, strange line tool bug
Stefan Salewski
- gEDA-user: pcb, strange line tool bug
Stefan Salewski
- gEDA-user: pcb, strange line tool bug
Stefan Salewski
- gEDA-user: Is it possible to prevent geda tools from creating log files?
Stefan Salewski
- gEDA-user: I am doing something wrong in PCB
Stefan Salewski
- gEDA-user: Is there a directory of footprints for PCB?
Stefan Salewski
- gEDA-user: pcb, howto partition power planes?
Stefan Salewski
- gEDA-user: pcb, polygon dead copper removal question
Stefan Salewski
- gEDA-user: pcb, howto partition power planes?
Stefan Salewski
- gEDA-user: pcb, howto partition power planes?
Stefan Salewski
- gEDA-user: pcb, howto partition power planes?
Stefan Salewski
- gEDA-user: Printing schematics to files
Stefan Salewski
- gEDA-user: About polygon clearances
Eduardo Santana
- gEDA-user: About polygon clearances
Eduardo Santana
- gEDA-user: board's setup and output
Eduardo Santana
- gEDA-user: View->Displayed element name->Value
Eduardo Santana
- gEDA-user: View->Displayed element name->Value
Eduardo Santana
- gEDA-user: [pcb] IPC 2581 standard (was Driving the netlist from PCB (instead of gschem))
Bert Timmerman
- gEDA-user: pcb, howto get plain rats lines instead of circles
Bert Timmerman
- gEDA-user: pcb, howto get plain rats lines instead of circles
Bert Timmerman
- gEDA-user: pcb, howto get plain rats lines instead of circles
Bert Timmerman
- gEDA-user: PCB to IGES converstion?
Bert Timmerman
- gEDA-user: PCB to IGES converstion?
Bert Timmerman
- gEDA-user: Is there a directory of footprints for PCB?
Peter Todd
- gEDA-user: Syntax error in pcb file
Neil Webster
- gEDA-user: Syntax error in pcb file
Neil Webster
- gEDA-user: Syntax error in pcb file
Neil Webster
- gEDA-user: pcb, howto partition power planes?
Neil Webster
- gEDA-user: Tips for using gEDA on the MAC
Peter Wiley-Cordone
- gEDA-user: Tips for using gEDA on the MAC
Peter Wiley-Cordone
- gEDA-user: Trouble with an usb oscilloscope
Eric Winsor
- gEDA-user: pcb, howto partition power planes?
Eric Winsor
- gEDA-user: How to use common symbols on multiple computers using pcb
Christian Wolf
- gEDA-user: gschem: How to connect two nets from different sheet
Wojciech Zabolotny
- gEDA-user: gschem: How to connect two nets from different sheet
Wojciech Zabolotny
- gEDA-user: gschem: How to connect two nets from different sheet
Wojciech Zabolotny
- gEDA-user: Dirty workaraound. Was: gschem: How to connect two nets from different sheet
Wojciech Zabolotny
- gEDA-user: gschem: How to connect two nets from different sheet
Wojciech Zabolotny
- gEDA-user: Newbie -- How to properly associate DNI or Do Not Populate to component
bbruce888
- gEDA-user: Driving the netlist from PCB (instead of gschem)
al davis
- gEDA-user: gnucap development snapshot 2008-10-10
al davis
- gEDA-user: Tips for using gEDA on the MAC
al davis
- gEDA-user: External attribute read/write - how?
al davis
- gEDA-user: A few questions about gschem, gnetlist, and gspiceui/ngspice
al davis
- gEDA-user: OT BitScope?
Ibai egurrola
- gEDA-user: PCB captures 'Mod4/Windows' key
bioe007list at hotmail.com
- gEDA-user: Component rotation in PCB
michalwd1979
- gEDA-user: Component rotation in PCB
michalwd1979
- gEDA-user: Component rotation in PCB
michalwd1979
- gEDA-user: PCB cvs - library preview problem
michalwd1979
- gEDA-user: PCB cvs - library preview problem
michalwd1979
- gEDA-user: How to set node 0 in gschem
nikosapi
- gEDA-user: How to set node 0 in gschem
nikosapi
- gEDA-user: gschem libraries not connected in ubuntu
dyovemy02 at sneakemail.com
- gEDA-user: gschem libraries not connected in ubuntu
dyovemy02 at sneakemail.com
- gEDA-user: Newbie -- How to properly associate DNI or Do Not Populate to component
joe tarantino
- gEDA-user: pcb, question to crosshair to grid snapping
joe tarantino
- gEDA-user: Problem breaking apart an element in the buffer
tj
- gEDA-user: selction only highlights one element
tj
- gEDA-user: cannot compile gwave2
wing
- gEDA-user: cannot compile gwave2
wing
- gEDA-user: bom2 fails with stack overflow
Carlos Nieves Ónega
Last message date:
Fri Oct 31 23:25:46 EDT 2008
Archived on: Fri Jan 15 17:01:21 EST 2010
This archive was generated by
Pipermail 0.09 (Mailman edition).