gEDA-user: schematic hierarchy netlist problem

[Peter Baxendale]

I don't know where the U?-? comes from. It's not in any of the
schematics, just in the netlist produced by gsch2pcb. Every net that
connects to one of the io symbols ends in a U?-?. The line I quoted
should only have 3 nodes, the extra U?-? looks to be entirely spurious.
I should have said, I'm using the gschem 1.0.1-20070626 release.

On Tue, 2007-07-17 at 14:39 -0700, Steve Meier wrote:
> It looks like it is partially working.
> 
> Your net list has S2/R2-1 which is one hierarchical level down from
> SW1-2.
> 
> Is the U?-? the symbol that has the lower level schematic?
> 
> 
> Steve Meier
> 
> 
> On Tue, 2007-07-17 at 17:04 +0100, Peter Baxendale wrote:
> > Been experimenting with hierarchical design with gschem. When I generate
> > the netlist using gsch2pcb I get a  U?-? on every net that goes to one
> > of the io objects.
> > 

> _______________________________________________
> geda-user mailing list
> geda-user at moria.seul.org
> http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
> 
-- 
------------------------------------------------------------
Peter Baxendale                       University of Durham
peter.baxendale at durham.ac.uk          School of Engineering
tel +44 191 33 42492                  South Road
fax +44 191 33 42408                  Durham DH1 3LE
                                      England
------------------------------------------------------------