January 2007 Archives by thread

Messages sorted by: [ subject ] [ author ] [ date ]
More info on this list...

Starting: Mon Jan 1 10:18:33 EST 2007
Ending: Wed Jan 31 19:47:03 EST 2007
Messages: 465

gEDA-user: Line width of silk-screen text David Kuehling
- gEDA-user: Line width of silk-screen text DJ Delorie
gEDA-user: Line width of silk-screen text joeft
- gEDA-user: Line width of silk-screen text DJ Delorie
  - gEDA-user: Line width of silk-screen text joeft
    - gEDA-user: Line width of silk-screen text DJ Delorie
- gEDA-user: Line width of silk-screen text DJ Delorie
gEDA-user: footprint naming convention for MODULES? phil at plastitar.com
gEDA-user: [pcb] RenumberBlock plug-in DJ Delorie
- gEDA-user: good idea - bad idea ? KURT PETERS
  - gEDA-user: good idea - bad idea ? DJ Delorie
gEDA-user: PCB Autorouter is awesome. phil at plastitar.com
- gEDA-user: PCB Autorouter is awesome. DJ Delorie
gEDA-user: Newbie fab Qs craigni at att.net
- gEDA-user: Newbie fab Qs DJ Delorie
  - gEDA-user: Newbie fab Qs DJ Delorie
    - gEDA-user: Newbie fab Qs Steven Ball
- gEDA-user: Newbie fab Qs John Luciani
- gEDA-user: good idea - bad idea ? KURT PETERS
  - gEDA-user: good idea - bad idea ? Bert Timmerman
    - gEDA-user: good idea - bad idea ? DJ Delorie
  - gEDA-user: good idea - bad idea ? DJ Delorie
gEDA-user: power connections and hierarchy Kai-Martin Knaak
- gEDA-user: power connections and hierarchy John Griessen
  - gEDA-user: Re: power connections and hierarchy Kai-Martin Knaak
    - gEDA-user: Re: power connections and hierarchy John Luciani
    - gEDA-user: Re: power connections and hierarchy Kai-Martin Knaak
    - gEDA-user: Re: power connections and hierarchy John Griessen
gEDA-user: Re: hierarchy of schematics Bill Cox
- gEDA-user: Solder Mask Clearance Mike Hansen
  - gEDA-user: Solder Mask Clearance DJ Delorie
    - gEDA-user: Solder Mask Clearance Mike Hansen
    - gEDA-user: Solder Mask Clearance DJ Delorie
    - gEDA-user: Solder Mask Clearance Mike Hansen
    - gEDA-user: Solder Mask Clearance DJ Delorie
    - gEDA-user: Solder Mask Clearance Mike Hansen
    - gEDA-user: Solder Mask Clearance DJ Delorie
    - gEDA-user: Solder Mask Clearance Mike Hansen
    - gEDA-user: Solder Mask Clearance DJ Delorie
    - gEDA-user: Solder Mask Clearance Mike Hansen
    - gEDA-user: Solder Mask Clearance DJ Delorie
    - gEDA-user: Solder Mask Clearance Mike Hansen
    - gEDA-user: Solder Mask Clearance DJ Delorie
    - gEDA-user: Solder Mask Clearance Mike Hansen
    - gEDA-user: Solder Mask Clearance Mike Hansen
gEDA-user: Gschem aborts when adding a pin Terry Barnaby
gEDA-user: undo "ev" Mark Rages
- gEDA-user: undo "ev" John Luciani
  - gEDA-user: undo "ev" Mark Rages
    - gEDA-user: undo "ev" Ales Hvezda
    - gEDA-user: undo "ev" Mark Rages
gEDA-user: off-page references Lares Moreau
- gEDA-user: off-page references DJ Delorie
- gEDA-user: Free Dog Meeting, Tuesday January 16th! Stuart Brorson
gEDA-user: PC104 Footprint? Lares Moreau
- gEDA-user: latest CVS version -> happy user with a request Adrian Nania
gEDA-user: PCB cvs segmentation fault Dimitri Princen
gEDA-user: wiki entry on hierarchy Kai-Martin Knaak
gEDA-user: bulk embeddeding? DJ Delorie
- gEDA-user: Re: bulk embeddeding? Kai-Martin Knaak
- gEDA-user: bulk embeddeding? Ales Hvezda
  - gEDA-user: bulk embeddeding? DJ Delorie
  - gEDA-user: Re: bulk embeddeding? Kai-Martin Knaak
    - gEDA-user: Re: bulk embeddeding? Dan McMahill
    - gEDA-user: Re: bulk embeddeding? Ales Hvezda
  - gEDA-user: bulk embeddeding? DJ Delorie
    - gEDA-user: bulk embeddeding? Ales Hvezda
    - gEDA-user: bulk embeddeding? DJ Delorie
  - gEDA-user: bulk embeddeding? DJ Delorie
  - gEDA-user: bulk embeddeding? DJ Delorie
- gEDA-user: for gEDA CVS, add/copy-component-hook has two small bugs. Adrian Nania
gEDA-user: small fonts when printing from gschem David Rowe
gEDA-user: PCB antenna and solder mask David Kuehling
- gEDA-user: PCB antenna and solder mask John Luciani
  - gEDA-user: PCB antenna and solder mask David Kuehling
    - gEDA-user: PCB antenna and solder mask John Luciani
    - gEDA-user: PCB antenna and solder mask John Griessen
    - gEDA-user: PCB antenna and solder mask John Luciani
    - gEDA-user: PCB antenna and solder mask Dan McMahill
  - gEDA-user: PCB antenna and solder mask David Kuehling
- gEDA-user: spice-sdb - NPN model in gschem KURT PETERS
gEDA-user: I need layer for board outline Evgeny M. Zubok
- gEDA-user: I need layer for board outline DJ Delorie
- gEDA-user: I need layer for board outline DJ Delorie
  - gEDA-user: I need layer for board outline John Griessen
    - gEDA-user: I need layer for board outline DJ Delorie
- gEDA-user: Re: I need layer for board outline Evgeny M. Zubok
gEDA-user: GND vs. PGND David Kuehling
- gEDA-user: GND vs. PGND John Luciani
  - gEDA-user: GND vs. PGND David Kuehling
- gEDA-user: GND vs. PGND Lares Moreau
- gEDA-user: RE: geda-user Digest, Vol 8, Issue 20 KURT PETERS
  - gEDA-user: updating layout with new footprint Ostheller, Joel A.
    - gEDA-user: updating layout with new footprint DJ Delorie
    - gEDA-user: updating layout with new footprint Ostheller, Joel A.
    - gEDA-user: updating layout with new footprint DJ Delorie
    - gEDA-user: updating layout with new footprint John Griessen
    - gEDA-user: updating layout with new footprint DJ Delorie
    - gEDA-user: updating layout with new footprint Ostheller, Joel A.
    - gEDA-user: updating layout with new footprint DJ Delorie
    - gEDA-user: updating layout with new footprint Ostheller, Joel A.
    - gEDA-user: updating layout with new footprint DJ Delorie
    - gEDA-user: Re: updating layout with new footprint Kai-Martin Knaak
    - gEDA-user: updating layout with new footprint joeft
    - gEDA-user: updating layout with new footprint David Rowe
    - gEDA-user: Re: updating layout with new footprint Levente Kovacs
- gEDA-user: GEDA Code Sprint -- Feb 10th. Mark your calendars! Stuart Brorson
  - gEDA-user: Re: gEDA-announce: GEDA Code Sprint -- Feb 10th. Mark your calendars! DJ Delorie
    - gEDA-user: Re: gEDA-announce: GEDA Code Sprint -- Feb 10th. Mark your calendars! Ales Hvezda
  - gEDA-user: ground / power layers Ostheller, Joel A.
    - gEDA-user: ground / power layers DJ Delorie
gEDA-user: GEDA Code Sprint: Idea Lares Moreau
- gEDA-user: GEDA Code Sprint: Idea DJ Delorie
  - gEDA-user: GEDA Code Sprint: Idea Mark Rages
    - gEDA-user: GEDA Code Sprint: Idea Stuart Brorson
    - gEDA-user: GEDA Code Sprint: Idea DJ Delorie
  - gEDA-user: Re: GEDA Code Sprint: Idea Kai-Martin Knaak
    - gEDA-user: Re: GEDA Code Sprint: Idea DJ Delorie
    - gEDA-user: Re: GEDA Code Sprint: Idea joeft
    - gEDA-user: Re: GEDA Code Sprint: Idea Dan McMahill
    - gEDA-user: Re: GEDA Code Sprint: Idea joeft
    - gEDA-user: GEDA Code Sprint: Idea Andy Peters
    - gEDA-user: Re: GEDA Code Sprint: Idea Kai-Martin Knaak
    - gEDA-user: Re: GEDA Code Sprint: Idea DJ Delorie
    - gEDA-user: Re: GEDA Code Sprint: Idea Lares Moreau
    - gEDA-user: Re: GEDA Code Sprint: Idea DJ Delorie
    - gEDA-user: GEDA Code Sprint: Idea DJ Delorie
    - gEDA-user: GEDA Code Sprint: Idea John Griessen
    - gEDA-user: GEDA Code Sprint: Idea DJ Delorie
  - gEDA-user: PCB general question Ostheller, Joel A.
    - gEDA-user: PCB general question DJ Delorie
gEDA-user: small fonts when printing from gschem David Rowe
- gEDA-user: Re: small fonts when printing from gschem Kai-Martin Knaak
- gEDA-user: small fonts when printing from gschem Carlos Nieves Ónega
  - gEDA-user: small fonts when printing from gschem David Rowe
    - gEDA-user: small fonts when printing from gschem Peter TB Brett
gEDA-user: furnace board 2 preview DJ Delorie
gEDA-user: Gschem to PCB pin names to numbers Terry Barnaby
- gEDA-user: Gschem to PCB pin names to numbers Dan McMahill
  - gEDA-user: Gschem to PCB pin names to numbers Terry Barnaby
    - gEDA-user: Gschem to PCB pin names to numbers Andy Peters
gEDA-user: PCB gerber export problem Tomaz Solc
- gEDA-user: PCB gerber export problem Matthew Sager
gEDA-user: pcb crash when highlighting net joeft
gEDA-user: gsch2pcb not updating schematic properly David Kuehling
gEDA-user: Silk on vias David Kuehling
- gEDA-user: Silk on vias joeft
  - gEDA-user: Silk on vias David Kuehling
    - gEDA-user: Silk on vias John Luciani
gEDA-user: Gschem q? Lares Moreau
- gEDA-user: Gschem q? Ales Hvezda
gEDA-user: circuit simulation - backend library? kitts
- gEDA-user: circuit simulation - backend library? al davis
  - gEDA-user: circuit simulation - backend library? kitts
- gEDA-user: Segfault in PS hid -> patch Hans Nieuwenhuis
  - gEDA-user: Segfault in PS hid -> patch DJ Delorie
    - gEDA-user: Segfault in PS hid -> patch Hans Nieuwenhuis
  - gEDA-user: Segfault in PS hid -> patch DJ Delorie
    - gEDA-user: Segfault in PS hid -> patch Hans Nieuwenhuis
    - gEDA-user: Segfault in PS hid -> patch DJ Delorie
    - gEDA-user: Segfault in PS hid -> patch Hans Nieuwenhuis
gEDA-user: Newbie question on Icarus and ARM Teresa Ooi
gEDA-user: Thermal via in pad David Kuehling
- gEDA-user: Thermal via in pad Darrell Harmon
  - gEDA-user: Thermal via in pad Dan McMahill
    - gEDA-user: Thermal via in pad DJ Delorie
    - gEDA-user: Thermal via in pad David Kuehling
    - gEDA-user: Thermal via in pad DJ Delorie
    - gEDA-user: Thermal via in pad Steve Meier
  - gEDA-user: Thermal via in pad David Kuehling
- gEDA-user: Thermal via in pad Steve Meier
  - gEDA-user: Thermal via in pad Dan McMahill
    - gEDA-user: Thermal via in pad Steve Meier
gEDA-user: PCB gerber export problem - update Tomaz Solc
- gEDA-user: PCB gerber export problem - update DJ Delorie
  - gEDA-user: PCB gerber export problem - update Tomaz Solc
- gEDA-user: PCB gerber export problem - update DJ Delorie
  - gEDA-user: PCB gerber export problem - update Tomaz Solc
  - gEDA-user: PCB gerber export problem - update Tomaz Solc
    - gEDA-user: PCB gerber export problem - update DJ Delorie
- gEDA-user: Thermal via in pad KURT PETERS
  - gEDA-user: Thermal via in pad David Kuehling
gEDA-user: PCB gerber export problem - update Harry Eaton
- gEDA-user: PCB gerber export problem - update Tomaz Solc
- gEDA-user: PCB gerber export problem - update DJ Delorie
- gEDA-user: PCB gerber export problem - update DJ Delorie
gEDA-user: Another m4 problem.... Lares Moreau
- gEDA-user: Another m4 problem.... DJ Delorie
  - gEDA-user: Another m4 problem.... Lares Moreau
    - gEDA-user: Another m4 problem.... DJ Delorie
    - gEDA-user: Another m4 problem....( kinda solved) Lares Moreau
    - gEDA-user: Another m4 problem.... SOLVED and broken Footprint :| Lares Moreau
    - gEDA-user: Another m4 problem.... SOLVED and broken Footprint :| DJ Delorie
    - gEDA-user: Another m4 problem.... SOLVED and broken Footprint :| John Luciani
    - gEDA-user: Another m4 problem.... SOLVED and broken Footprint :| Andy Peters
gEDA-user: gEDA install not detecting GTK+ on Fedora 6 Corey Wirun - nexus
- gEDA-user: gEDA install not detecting GTK+ on Fedora 6 Corey Wirun - nexus
  - Re: Re: gEDA-user: gEDA install not detecting GTK+ on Fedora 6 Wojciech Kazubski
  - gEDA-user: gEDA install not detecting GTK+ on Fedora 6 Stuart Brorson
    - gEDA-user: gEDA install not detecting GTK+ on Fedora 6 Peter Clifton
    - Re: Re: gEDA-user: gEDA install not detecting GTK+ on Fedora 6 Wojciech Kazubski
gEDA-user: Hide specific rats nests Kai-Martin Knaak
- gEDA-user: Hide specific rats nests John Griessen
  - gEDA-user: Hide specific rats nests Hans Nieuwenhuis
    - gEDA-user: Re: Hide specific rats nests Kai-Martin Knaak
- gEDA-user: 56 Pin part with lots of No Connects KURT PETERS
  - gEDA-user: 56 Pin part with lots of No Connects Darrell Harmon
gEDA-user: Which PCB HID is better? Michael Sokolov
- gEDA-user: Which PCB HID is better? DJ Delorie
  - gEDA-user: Which PCB HID is better? Harry Eaton
    - gEDA-user: Re: Which PCB HID is better? Kai-Martin Knaak
    - gEDA-user: Re: Which PCB HID is better? Dan McMahill
    - gEDA-user: Which PCB HID is better? DJ Delorie
    - gEDA-user: Which PCB HID is better? John Griessen
    - gEDA-user: Which PCB HID is better? DJ Delorie
  - gEDA-user: Re: Which PCB HID is better? Levente Kovacs
    - gEDA-user: Re: Which PCB HID is better? DJ Delorie
- gEDA-user: Re: Which PCB HID is better? Levente Kovacs
  - gEDA-user: Re: Which PCB HID is better? Peter Clifton
    - gEDA-user: Re: Which PCB HID is better? Kai-Martin Knaak
    - gEDA-user: Re: Which PCB HID is better? Levente Kovacs
- gEDA-user: Free Dog Meeting -- Tonight in Reading, MA! Stuart Brorson
  - gEDA-user: Free Dog Meeting -- Tonight in Reading, MA! Peter Clifton
gEDA-user: pcb autorouter segfaults on lineout lines outside Kai-Martin Knaak
gEDA-user: Returned mail: see transcript for details sdb at cloud9.net
gEDA-user: Some pcb pecularities Kai-Martin Knaak
- gEDA-user: Some pcb pecularities Tomaz Solc
  - gEDA-user: Re: Some pcb pecularities Kai-Martin Knaak
    - gEDA-user: Re: Some pcb pecularities Tomaz Solc
    - gEDA-user: Re: Some pcb pecularities Kai-Martin Knaak
    - gEDA-user: Re: Some pcb pecularities DJ Delorie
- gEDA-user: Some pcb pecularities DJ Delorie
  - gEDA-user: Some pcb pecularities Peter Clifton
    - gEDA-user: Some pcb pecularities DJ Delorie
    - gEDA-user: Some pcb pecularities Steve Meier
  - gEDA-user: Re: Some pcb pecularities Kai-Martin Knaak
    - gEDA-user: Re: Some pcb pecularities DJ Delorie
    - gEDA-user: Re: Some pcb pecularities joeft
  - gEDA-user: Some pcb pecularities Tomaz Solc
  - gEDA-user: Some pcb pecularities Harry Eaton
    - gEDA-user: Some pcb pecularities DJ Delorie
    - gEDA-user: Some pcb pecularities joeft
    - gEDA-user: Re: Some pcb pecularities Kai-Martin Knaak
    - gEDA-user: Re: Some pcb pecularities joe tarantino
- gEDA-user: Some pcb pecularities John Griessen
- gEDA-user: Some pcb pecularities Dan McMahill
  - gEDA-user: Re: Some pcb pecularities Kai-Martin Knaak
- gEDA-user: Re: Some pcb pecularities Kai-Martin Knaak
  - gEDA-user: Re: Some pcb pecularities Kai-Martin Knaak
    - gEDA-user: Re: Some pcb pecularities DJ Delorie
gEDA-user: Footprint Library Updates at luciani.org John Luciani
- gEDA-user: resistorpack12-1.sym have 12 resistors? csanyipal
gEDA-user: Need a Verilog test run Stephen Williams
- gEDA-user: Need a Verilog test run Schulmeyer, K
  - gEDA-user: Need a Verilog test run carzrgr8 at optonline.net
- gEDA-user: resistorpack12-1.sym have 11 resistors? csanyipal
  - gEDA-user: Re: resistorpack12-1.sym have 11 resistors? Kai-Martin Knaak
gEDA-user: Free dogs in Southern California? Michael Sokolov
gEDA-user: Dual position resistors in gschem/pcb Michael Sokolov
- gEDA-user: Dual position resistors in gschem/pcb DJ Delorie
- gEDA-user: Dual position resistors in gschem/pcb Lares Moreau
gEDA-user: rs232 ferrite size? DJ Delorie
- gEDA-user: rs232 ferrite size? joeft
  - gEDA-user: rs232 ferrite size? DJ Delorie
    - gEDA-user: rs232 ferrite size? Ostheller, Joel A.
    - gEDA-user: rs232 ferrite size? Peter Clifton
    - gEDA-user: rs232 ferrite size? DJ Delorie
    - gEDA-user: rs232 ferrite size? John Doty
    - gEDA-user: rs232 ferrite size? DJ Delorie
  - gEDA-user: how to covnert netlist to schema ludovic smadja
    - gEDA-user: how to covnert netlist to schema joeft
    - gEDA-user: how to covnert netlist to schema Ludovic SMADJA
gEDA-user: Galaksija motherboard Tomaz Solc
gEDA-user: Label Selection. Lares Moreau
- gEDA-user: Label Selection. Lares Moreau
  - gEDA-user: Label Selection. Harry Eaton
    - gEDA-user: Label Selection. Tomaz Solc
    - gEDA-user: Label Selection. DJ Delorie
    - gEDA-user: Label Selection. Tomaz Solc
    - gEDA-user: Label Selection. Harry Eaton
    - gEDA-user: Label Selection. DJ Delorie
gEDA-user: PCB manufacture Lares Moreau
- gEDA-user: PCB manufacture David Carr
- gEDA-user: PCB - Rectangle/Polygon on pad KURT PETERS
  - gEDA-user: PCB - Rectangle/Polygon on pad DJ Delorie
  - gEDA-user: PCB - Rectangle/Polygon on pad Harry Eaton
gEDA-user: PTC thermistor footprint Michael Sokolov
- gEDA-user: PTC thermistor footprint Lares Moreau
- gEDA-user: PTC thermistor footprint John Luciani
gEDA-user: [pcb] lesstif netlist dialog enhancements DJ Delorie
gEDA-user: Fitting a hobbyist design into someone else's form factor Michael Sokolov
- gEDA-user: Fitting a hobbyist design into someone else's form factor DJ Delorie
  - gEDA-user: Fitting a hobbyist design into someone else's form factor Mike Hansen
- gEDA-user: Fitting a hobbyist design into someone else's form factor John Luciani
  - gEDA-user: Fitting a hobbyist design into someone else's form factor Tomaz Solc
gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options? Jeremy Pedersen
- gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options? DJ Delorie
  - gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options? Mark Rages
    - gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options? DJ Delorie
    - gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options? Jeremy Pedersen
    - gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options? DJ Delorie
    - gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options? Karl.
    - gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options? DJ Delorie
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? Ostheller, Joel A.
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? Lares Moreau
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? Jeremy Pedersen
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? DJ Delorie
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? John Luciani
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? Jeremy Pedersen
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? DJ Delorie
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? Mark Rages
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? Dave McGuire
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? DJ Delorie
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? Peter Clifton
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? John Luciani
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? DJ Delorie
    - gEDA-user: I need to open and print a PCB created inExpressPCB:What are my options? Ostheller, Joel A.
    - gEDA-user: I need to open and print a PCB created inExpressPCB:What are my options? DJ Delorie
    - gEDA-user: I need to open and print a PCB created inExpressPCB:What are my options? DJ Delorie
    - gEDA-user: I need to open and print a PCB createdinExpressPCB:What are my options? Ostheller, Joel A.
    - gEDA-user: I need to open and print a PCB createdinExpressPCB:What are my options? DJ Delorie
    - gEDA-user: Re: Scope Ostheller, Joel A.
    - gEDA-user: Re: Scope DJ Delorie
    - gEDA-user: I need to open and print a PCB createdinExpressPCB:What are my options? Jeremy Pedersen
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? Dan McMahill
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? DJ Delorie
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? Steve Meier
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? Darrell Harmon
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? Dave McGuire
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? John Luciani
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? Dave McGuire
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? Jeremy Pedersen
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? Mark Rages
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? DJ Delorie
    - gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options? John Luciani
    - gEDA-user: Re: I need to open and print a PCB created in ExpressPCB:What are my options? Levente Kovacs
    - gEDA-user: Re: I need to open and print a PCB created in ExpressPCB:What are my options? Jeremy Pedersen
    - gEDA-user: Re: I need to open and print a PCB created in ExpressPCB:What are my options? Dave McGuire
    - gEDA-user: Re: I need to open and print a PCB created in ExpressPCB:What are my options? Jeremy Pedersen
    - gEDA-user: Re: I need to open and print a PCB created in ExpressPCB:What are my options? Dave McGuire
- gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options? John Luciani
gEDA-user: PCB multiple footprint selection Ed & Angie S.
- gEDA-user: PCB multiple footprint selection John Luciani
  - gEDA-user: PCB multiple footprint selection phil at plastitar.com
  - gEDA-user: PCB multiple footprint selection Ed & Angie S.
- gEDA-user: board cutout in PCB Hans Nieuwenhuis
  - gEDA-user: board cutout in PCB DJ Delorie
    - gEDA-user: board cutout in PCB Hans Nieuwenhuis
    - gEDA-user: board cutout in PCB Tomaz Solc
    - gEDA-user: board cutout in PCB DJ Delorie
gEDA-user: gnucap: Multi-disciplinary / mixed language simulation Peter Clifton
- gEDA-user: gnucap: Multi-disciplinary / mixed language simulation Dan McMahill
  - gEDA-user: gnucap: Multi-disciplinary / mixed language simulation Peter Clifton
- gEDA-user: gnucap: Multi-disciplinary / mixed language simulation al davis
  - gEDA-user: gnucap: Multi-disciplinary / mixed language simulation Peter Clifton
    - gEDA-user: gnucap: Multi-disciplinary / mixed language simulation al davis
    - gEDA-user: gnucap: Multi-disciplinary / mixed language simulation Peter Clifton
    - gEDA-user: gnucap: Multi-disciplinary / mixed language simulation Dan McMahill
    - gEDA-user: gnucap: Multi-disciplinary / mixed language simulation Peter Clifton
- gEDA-user: gnucap: Multi-disciplinary / mixed language simulation Colin Hall
  - gEDA-user: gnucap: Multi-disciplinary / mixed language simulation Peter Clifton
gEDA-user: Re: I need to open and print a PCB created in ExpressPCB:What are my options? Jeremy Pedersen

Last message date: Wed Jan 31 19:47:03 EST 2007
Archived on: Fri Jan 15 16:52:17 EST 2010

Messages sorted by: [ subject ] [ author ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).