January 2007 Archives by date
Starting: Mon Jan 1 10:18:33 EDT 2007
Ending: Wed Jan 31 19:47:03 EDT 2007
Messages: 465
- gEDA-user: Line width of silk-screen text
David Kuehling
- gEDA-user: Line width of silk-screen text
DJ Delorie
- gEDA-user: Line width of silk-screen text
joeft
- gEDA-user: Line width of silk-screen text
DJ Delorie
- gEDA-user: Line width of silk-screen text
DJ Delorie
- gEDA-user: footprint naming convention for MODULES?
phil at plastitar.com
- gEDA-user: autogenerate footprints
Ostheller, Joel A.
- gEDA-user: autogenerate footprints
DJ Delorie
- gEDA-user: autogenerate footprints
John Luciani
- gEDA-user: autogenerate footprints
Ostheller, Joel A.
- gEDA-user: pintype attritubute and gnetlist
Ostheller, Joel A.
- gEDA-user: pintype attritubute and gnetlist
John Luciani
- gEDA-user: gsch2pcb : coming up empty
Andy Peters
- gEDA-user: gsch2pcb : coming up empty
John Griessen
- gEDA-user: gsch2pcb : coming up empty
Ostheller, Joel A.
- gEDA-user: gsch2pcb : coming up empty
DJ Delorie
- gEDA-user: gsch2pcb : coming up empty
Andy Peters
- gEDA-user: gsch2pcb : coming up empty
John Luciani
- gEDA-user: gsch2pcb : coming up empty
Andy Peters
- gEDA-user: gsch2pcb : coming up empty
DJ Delorie
- gEDA-user: gsch2pcb : coming up empty
Andy Peters
- gEDA-user: gsch2pcb : coming up empty
John Luciani
- gEDA-user: gsch2pcb : coming up empty
Andy Peters
- gEDA-user: gsch2pcb : coming up empty
Andy Peters
- gEDA-user: gsch2pcb : coming up empty
John Luciani
- gEDA-user: gsch2pcb : coming up empty
Hans Nieuwenhuis
- gEDA-user: pintype attritubute and gnetlist
Carlos Nieves Ónega
- gEDA-user: pintype attritubute and gnetlist
John Luciani
- gEDA-user: gsch2pcb : coming up empty
Andy Peters
- gEDA-user: gsch2pcb : coming up empty
Andy Peters
- gEDA-user: gsch2pcb : coming up empty
John Luciani
- gEDA-user: gsch2pcb : coming up empty
Andy Peters
- gEDA-user: [pcb] RenumberBlock plug-in
DJ Delorie
- gEDA-user: mv M4 libraries
Ostheller, Joel A.
- gEDA-user: mv M4 libraries
John Luciani
- gEDA-user: mv M4 libraries
Ostheller, Joel A.
- gEDA-user: gsch2pcb : coming up empty
Hans Nieuwenhuis
- gEDA-user: good idea - bad idea ?
Ostheller, Joel A.
- gEDA-user: good idea - bad idea ?
DJ Delorie
- gEDA-user: good idea - bad idea ?
Ostheller, Joel A.
- gEDA-user: good idea - bad idea ?
John Luciani
- gEDA-user: good idea - bad idea ?
DJ Delorie
- Success! was Re: gEDA-user: gsch2pcb : coming up empty
Andy Peters
- gEDA-user: good idea - bad idea ?
Andy Peters
- gEDA-user: good idea - bad idea ?
John Luciani
- gEDA-user: good idea - bad idea ?
Andy Peters
- gEDA-user: good idea - bad idea ?
Ostheller, Joel A.
- gEDA-user: good idea - bad idea ?
John Luciani
- gEDA-user: Re: good idea - bad idea ?
Kai-Martin Knaak
- gEDA-user: good idea - bad idea ?
KURT PETERS
- gEDA-user: good idea - bad idea ?
DJ Delorie
- gEDA-user: PCB Autorouter is awesome.
phil at plastitar.com
- gEDA-user: PCB Autorouter is awesome.
DJ Delorie
- gEDA-user: Newbie fab Qs
craigni at att.net
- gEDA-user: Newbie fab Qs
DJ Delorie
- gEDA-user: Newbie fab Qs
DJ Delorie
- gEDA-user: Newbie fab Qs
Steven Ball
- gEDA-user: Re: hierarchy of schematics
Andy Peters
- gEDA-user: random observations
Andy Peters
- gEDA-user: Re: random observations
Kai-Martin Knaak
- gEDA-user: Re: hierarchy of schematics
Kai-Martin Knaak
- gEDA-user: good idea - bad idea ?
KURT PETERS
- gEDA-user: good idea - bad idea ?
Bert Timmerman
- gEDA-user: random observations
DJ Delorie
- gEDA-user: good idea - bad idea ?
DJ Delorie
- gEDA-user: good idea - bad idea ?
DJ Delorie
- gEDA-user: power connections and hierarchy
Kai-Martin Knaak
- gEDA-user: Newbie fab Qs
John Luciani
- gEDA-user: Re: hierarchy of schematics
Bill Cox
- gEDA-user: pintype attritubute and gnetlist
Carlos Nieves Ónega
- gEDA-user: Solder Mask Clearance
Mike Hansen
- gEDA-user: random observations
Andy Peters
- gEDA-user: Re: random observations
Andy Peters
- gEDA-user: Solder Mask Clearance
DJ Delorie
- gEDA-user: random observations
DJ Delorie
- gEDA-user: random observations
Andy Peters
- gEDA-user: random observations
DJ Delorie
- gEDA-user: random observations
Carlos Nieves Ónega
- gEDA-user: random observations
DJ Delorie
- gEDA-user: Solder Mask Clearance
Mike Hansen
- gEDA-user: Solder Mask Clearance
DJ Delorie
- gEDA-user: Solder Mask Clearance
Mike Hansen
- gEDA-user: Solder Mask Clearance
DJ Delorie
- gEDA-user: Re: hierarchy of schematics
John Griessen
- gEDA-user: random observations
John Griessen
- gEDA-user: power connections and hierarchy
John Griessen
- gEDA-user: mv M4 libraries
Dan McMahill
- gEDA-user: mv M4 libraries
John Luciani
- gEDA-user: Solder Mask Clearance
Mike Hansen
- gEDA-user: Solder Mask Clearance
DJ Delorie
- gEDA-user: Solder Mask Clearance
Mike Hansen
- gEDA-user: Solder Mask Clearance
DJ Delorie
- gEDA-user: Solder Mask Clearance
Mike Hansen
- gEDA-user: Solder Mask Clearance
DJ Delorie
- gEDA-user: Solder Mask Clearance
Mike Hansen
- gEDA-user: Solder Mask Clearance
DJ Delorie
- gEDA-user: Solder Mask Clearance
Mike Hansen
- gEDA-user: Solder Mask Clearance
Mike Hansen
- gEDA-user: Re: power connections and hierarchy
Kai-Martin Knaak
- gEDA-user: autogenerate footprints
Peter Baxendale
- gEDA-user: Gschem aborts when adding a pin
Terry Barnaby
- gEDA-user: Gschem aborts when adding a pin
Stuart Brorson
- gEDA-user: Re: power connections and hierarchy
John Luciani
- gEDA-user: Gschem aborts when adding a pin
Terry Barnaby
- gEDA-user: Gschem aborts when adding a pin
Stuart Brorson
- gEDA-user: Re: power connections and hierarchy
John Griessen
- gEDA-user: autogenerate footprints
John Griessen
- gEDA-user: Re: power connections and hierarchy
Kai-Martin Knaak
- gEDA-user: Gschem aborts when adding a pin
Ostheller, Joel A.
- gEDA-user: autogenerate footprints
Darrell Harmon
- gEDA-user: autogenerate footprints
Darrell Harmon
- gEDA-user: undo "ev"
Mark Rages
- gEDA-user: undo "ev"
John Luciani
- gEDA-user: undo "ev"
Mark Rages
- gEDA-user: off-page references
Lares Moreau
- gEDA-user: Free Dog Meeting, Tuesday January 16th!
Stuart Brorson
- gEDA-user: off-page references
DJ Delorie
- gEDA-user: PC104 Footprint?
Lares Moreau
- gEDA-user: latest CVS version -> happy user with a request
Adrian Nania
- gEDA-user: Line width of silk-screen text
joeft
- gEDA-user: Line width of silk-screen text
DJ Delorie
- gEDA-user: PCB cvs segmentation fault
Dimitri Princen
- gEDA-user: latest CVS version -> happy user with a request
Adrian Nania
- gEDA-user: wiki entry on hierarchy
Kai-Martin Knaak
- gEDA-user: bulk embeddeding?
DJ Delorie
- gEDA-user: for gEDA CVS,
add/copy-component-hook has two small bugs.
Adrian Nania
- gEDA-user: Re: bulk embeddeding?
Kai-Martin Knaak
- gEDA-user: Re: bulk embeddeding?
Stuart Brorson
- gEDA-user: Re: bulk embeddeding?
DJ Delorie
- gEDA-user: Re: bulk embeddeding?
Levente Kovacs
- gEDA-user: Re: bulk embeddeding?
DJ Delorie
- gEDA-user: Re: bulk embeddeding?
Andy Peters
- gEDA-user: small fonts when printing from gschem
David Rowe
- gEDA-user: bulk embeddeding?
Ales Hvezda
- gEDA-user: bulk embeddeding?
DJ Delorie
- gEDA-user: Re: bulk embeddeding?
Kai-Martin Knaak
- gEDA-user: PCB antenna and solder mask
David Kuehling
- gEDA-user: Re: bulk embeddeding?
Dan McMahill
- gEDA-user: PCB antenna and solder mask
John Luciani
- gEDA-user: I need layer for board outline
DJ Delorie
- gEDA-user: spice-sdb - NPN model in gschem
KURT PETERS
- gEDA-user: I need layer for board outline
DJ Delorie
- gEDA-user: I need layer for board outline
John Griessen
- gEDA-user: I need layer for board outline
DJ Delorie
- gEDA-user: spice-sdb - NPN model in gschem
Stuart Brorson
- gEDA-user: I need layer for board outline
Evgeny M. Zubok
- gEDA-user: bulk embeddeding?
DJ Delorie
- gEDA-user: bulk embeddeding?
DJ Delorie
- gEDA-user: PCB antenna and solder mask
David Kuehling
- gEDA-user: bulk embeddeding?
DJ Delorie
- gEDA-user: PCB antenna and solder mask
John Luciani
- gEDA-user: GND vs. PGND
David Kuehling
- gEDA-user: GND vs. PGND
Stuart Brorson
- gEDA-user: GND vs. PGND
John Luciani
- gEDA-user: GND vs. PGND
John Luciani
- gEDA-user: GND vs. PGND
John Luciani
- gEDA-user: GND vs. PGND
Lares Moreau
- gEDA-user: Re: I need layer for board outline
Evgeny M. Zubok
- gEDA-user: GND vs. PGND
Andy Peters
- gEDA-user: GND vs. PGND
John Luciani
- gEDA-user: RE: geda-user Digest, Vol 8, Issue 20
KURT PETERS
- gEDA-user: updating layout with new footprint
Ostheller, Joel A.
- gEDA-user: GEDA Code Sprint -- Feb 10th. Mark your calendars!
Stuart Brorson
- gEDA-user: updating layout with new footprint
DJ Delorie
- gEDA-user: Re: gEDA-announce: GEDA Code Sprint -- Feb 10th. Mark
your calendars!
DJ Delorie
- gEDA-user: ground / power layers
Ostheller, Joel A.
- gEDA-user: PCB antenna and solder mask
John Griessen
- gEDA-user: PCB antenna and solder mask
John Luciani
- gEDA-user: PCB antenna and solder mask
Dan McMahill
- gEDA-user: updating layout with new footprint
Ostheller, Joel A.
- gEDA-user: ground / power layers
DJ Delorie
- gEDA-user: updating layout with new footprint
DJ Delorie
- gEDA-user: GEDA Code Sprint: Idea
Lares Moreau
- gEDA-user: GEDA Code Sprint: Idea
DJ Delorie
- gEDA-user: PCB general question
Ostheller, Joel A.
- gEDA-user: PCB general question
DJ Delorie
- gEDA-user: small fonts when printing from gschem
David Rowe
- gEDA-user: updating layout with new footprint
John Griessen
- gEDA-user: updating layout with new footprint
DJ Delorie
- gEDA-user: updating layout with new footprint
Ostheller, Joel A.
- gEDA-user: updating layout with new footprint
Ostheller, Joel A.
- gEDA-user: updating layout with new footprint
DJ Delorie
- gEDA-user: updating layout with new footprint
DJ Delorie
- gEDA-user: GEDA Code Sprint: Idea
Mark Rages
- gEDA-user: GEDA Code Sprint: Idea
Stuart Brorson
- gEDA-user: GEDA Code Sprint: Idea
DJ Delorie
- gEDA-user: undo "ev"
Ales Hvezda
- gEDA-user: undo "ev"
Mark Rages
- gEDA-user: furnace board 2 preview
DJ Delorie
- gEDA-user: Re: GEDA Code Sprint: Idea
Kai-Martin Knaak
- gEDA-user: Re: updating layout with new footprint
Kai-Martin Knaak
- gEDA-user: Re: small fonts when printing from gschem
Kai-Martin Knaak
- gEDA-user: Gschem to PCB pin names to numbers
Terry Barnaby
- gEDA-user: PCB gerber export problem
Tomaz Solc
- gEDA-user: PCB gerber export problem
Matthew Sager
- gEDA-user: PCB gerber export problem
Stuart Brorson
- gEDA-user: Gschem to PCB pin names to numbers
Dan McMahill
- gEDA-user: PCB gerber export problem
Tomaz Solc
- gEDA-user: PCB gerber export problem
DJ Delorie
- gEDA-user: Re: GEDA Code Sprint: Idea
DJ Delorie
- gEDA-user: PCB gerber export problem
Stuart Brorson
- gEDA-user: Gschem to PCB pin names to numbers
Terry Barnaby
- gEDA-user: small fonts when printing from gschem
Carlos Nieves Ónega
- gEDA-user: Gschem to PCB pin names to numbers
Andy Peters
- gEDA-user: Re: GEDA Code Sprint: Idea
joeft
- gEDA-user: updating layout with new footprint
joeft
- gEDA-user: pcb crash when highlighting net
joeft
- gEDA-user: GND vs. PGND
David Kuehling
- gEDA-user: gsch2pcb not updating schematic properly
David Kuehling
- gEDA-user: PCB antenna and solder mask
David Kuehling
- gEDA-user: Re: GEDA Code Sprint: Idea
Dan McMahill
- gEDA-user: GND vs. PGND
Dan McMahill
- gEDA-user: GND vs. PGND
DJ Delorie
- gEDA-user: GEDA Code Sprint: Idea
Andy Peters
- gEDA-user: Re: GEDA Code Sprint: Idea
Kai-Martin Knaak
- gEDA-user: PCB gerber export problem
Ostheller, Joel A.
- gEDA-user: Silk on vias
David Kuehling
- gEDA-user: gsch2pcb not updating schematic properly
Ostheller, Joel A.
- gEDA-user: Re: GEDA Code Sprint: Idea
joeft
- gEDA-user: Silk on vias
joeft
- gEDA-user: GEDA Code Sprint: Idea
DJ Delorie
- gEDA-user: Re: GEDA Code Sprint: Idea
DJ Delorie
- gEDA-user: Re: GEDA Code Sprint: Idea
Lares Moreau
- gEDA-user: Re: GEDA Code Sprint: Idea
DJ Delorie
- gEDA-user: Silk on vias
David Kuehling
- gEDA-user: gsch2pcb not updating schematic properly
David Kuehling
- gEDA-user: Silk on vias
John Luciani
- gEDA-user: gsch2pcb not updating schematic properly
John Luciani
- gEDA-user: GND vs. PGND
Patrick Doyle
- gEDA-user: GEDA Code Sprint: Idea
John Griessen
- gEDA-user: GEDA Code Sprint: Idea
DJ Delorie
- gEDA-user: Gschem q?
Lares Moreau
- gEDA-user: circuit simulation - backend library?
kitts
- gEDA-user: circuit simulation - backend library?
Stuart Brorson
- gEDA-user: gsch2pcb not updating schematic properly
Ostheller, Joel A.
- gEDA-user: gsch2pcb not updating schematic properly
DJ Delorie
- gEDA-user: circuit simulation - backend library?
al davis
- gEDA-user: updating layout with new footprint
David Rowe
- gEDA-user: small fonts when printing from gschem
David Rowe
- gEDA-user: Segfault in PS hid -> patch
Hans Nieuwenhuis
- gEDA-user: Segfault in PS hid -> patch
DJ Delorie
- gEDA-user: Segfault in PS hid -> patch
Hans Nieuwenhuis
- gEDA-user: Segfault in PS hid -> patch
DJ Delorie
- gEDA-user: Newbie question on Icarus and ARM
Teresa Ooi
- gEDA-user: Segfault in PS hid -> patch
Hans Nieuwenhuis
- gEDA-user: Thermal via in pad
David Kuehling
- gEDA-user: Thermal via in pad
Darrell Harmon
- gEDA-user: Thermal via in pad
Dan McMahill
- gEDA-user: Segfault in PS hid -> patch
DJ Delorie
- gEDA-user: Thermal via in pad
DJ Delorie
- gEDA-user: circuit simulation - backend library?
kitts
- gEDA-user: circuit simulation - backend library?
kitts
- gEDA-user: Thermal via in pad
David Kuehling
- gEDA-user: Thermal via in pad
David Kuehling
- gEDA-user: Re: updating layout with new footprint
Levente Kovacs
- gEDA-user: PCB gerber export problem - update
Tomaz Solc
- gEDA-user: Thermal via in pad
KURT PETERS
- gEDA-user: Thermal via in pad
DJ Delorie
- gEDA-user: PCB gerber export problem - update
DJ Delorie
- gEDA-user: Thermal via in pad
Steve Meier
- gEDA-user: Thermal via in pad
Steve Meier
- gEDA-user: Segfault in PS hid -> patch
Hans Nieuwenhuis
- gEDA-user: PCB gerber export problem - update
Tomaz Solc
- gEDA-user: Thermal via in pad
Dan McMahill
- gEDA-user: Thermal via in pad
Steve Meier
- gEDA-user: Thermal via in pad
David Kuehling
- gEDA-user: PCB gerber export problem - update
Harry Eaton
- gEDA-user: PCB gerber export problem - update
Tomaz Solc
- gEDA-user: Another m4 problem....
Lares Moreau
- gEDA-user: PCB gerber export problem - update
DJ Delorie
- gEDA-user: Another m4 problem....
DJ Delorie
- gEDA-user: Another m4 problem....
Lares Moreau
- gEDA-user: Another m4 problem....
DJ Delorie
- gEDA-user: Another m4 problem....( kinda solved)
Lares Moreau
- gEDA-user: PCB gerber export problem - update
DJ Delorie
- gEDA-user: gEDA install not detecting GTK+ on Fedora 6
Corey Wirun - nexus
- gEDA-user: gEDA install not detecting GTK+ on Fedora 6
Corey Wirun - nexus
- gEDA-user: Another m4 problem.... SOLVED and broken Footprint :|
Lares Moreau
- gEDA-user: Another m4 problem.... SOLVED and broken Footprint :|
DJ Delorie
- gEDA-user: small fonts when printing from gschem
Peter TB Brett
- Re: Re: gEDA-user: gEDA install not detecting GTK+ on Fedora 6
Wojciech Kazubski
- gEDA-user: Another m4 problem.... SOLVED and broken Footprint :|
John Luciani
- gEDA-user: gEDA install not detecting GTK+ on Fedora 6
Stuart Brorson
- gEDA-user: gEDA install not detecting GTK+ on Fedora 6
Peter Clifton
- gEDA-user: Another m4 problem.... SOLVED and broken Footprint :|
Andy Peters
- Re: Re: gEDA-user: gEDA install not detecting GTK+ on Fedora 6
Wojciech Kazubski
- gEDA-user: Hide specific rats nests
Kai-Martin Knaak
- gEDA-user: Hide specific rats nests
John Griessen
- gEDA-user: Hide specific rats nests
Hans Nieuwenhuis
- gEDA-user: Re: Hide specific rats nests
Kai-Martin Knaak
- gEDA-user: 56 Pin part with lots of No Connects
KURT PETERS
- gEDA-user: 56 Pin part with lots of No Connects
Darrell Harmon
- gEDA-user: Which PCB HID is better?
Michael Sokolov
- gEDA-user: Which PCB HID is better?
DJ Delorie
- gEDA-user: Re: Which PCB HID is better?
Levente Kovacs
- gEDA-user: Free Dog Meeting -- Tonight in Reading, MA!
Stuart Brorson
- gEDA-user: Re: Which PCB HID is better?
Peter Clifton
- gEDA-user: Free Dog Meeting -- Tonight in Reading, MA!
Peter Clifton
- gEDA-user: Re: Which PCB HID is better?
Kai-Martin Knaak
- gEDA-user: Re: Which PCB HID is better?
Levente Kovacs
- gEDA-user: pcb autorouter segfaults on lineout lines outside
Kai-Martin Knaak
- gEDA-user: autogenerate footprints
Stephen W Morss
- gEDA-user: Which PCB HID is better?
Harry Eaton
- gEDA-user: Re: Which PCB HID is better?
Kai-Martin Knaak
- gEDA-user: Re: Which PCB HID is better?
Dan McMahill
- gEDA-user: PCB gerber export problem - update
DJ Delorie
- gEDA-user: Which PCB HID is better?
DJ Delorie
- gEDA-user: Returned mail: see transcript for details
sdb at cloud9.net
- gEDA-user: PCB gerber export problem - update
Tomaz Solc
- gEDA-user: Some pcb pecularities
Kai-Martin Knaak
- gEDA-user: Re: Which PCB HID is better?
Levente Kovacs
- gEDA-user: Some pcb pecularities
Tomaz Solc
- gEDA-user: Some pcb pecularities
DJ Delorie
- gEDA-user: Re: Which PCB HID is better?
DJ Delorie
- gEDA-user: Some pcb pecularities
Peter Clifton
- gEDA-user: Some pcb pecularities
DJ Delorie
- gEDA-user: Some pcb pecularities
Steve Meier
- gEDA-user: Re: Some pcb pecularities
Kai-Martin Knaak
- gEDA-user: Re: Some pcb pecularities
Kai-Martin Knaak
- gEDA-user: Re: Some pcb pecularities
DJ Delorie
- gEDA-user: Which PCB HID is better?
John Griessen
- gEDA-user: Some pcb pecularities
John Griessen
- gEDA-user: Re: Some pcb pecularities
Tomaz Solc
- gEDA-user: Which PCB HID is better?
DJ Delorie
- gEDA-user: Some pcb pecularities
Tomaz Solc
- gEDA-user: Re: Some pcb pecularities
Kai-Martin Knaak
- gEDA-user: Re: Some pcb pecularities
DJ Delorie
- gEDA-user: Some pcb pecularities
Dan McMahill
- gEDA-user: Re: Some pcb pecularities
Kai-Martin Knaak
- gEDA-user: Re: Some pcb pecularities
Kai-Martin Knaak
- gEDA-user: Re: Some pcb pecularities
Kai-Martin Knaak
- gEDA-user: Re: Some pcb pecularities
DJ Delorie
- gEDA-user: Re: Some pcb pecularities
joeft
- gEDA-user: Some pcb pecularities
Harry Eaton
- gEDA-user: Some pcb pecularities
DJ Delorie
- gEDA-user: Some pcb pecularities
joeft
- gEDA-user: Re: Some pcb pecularities
Kai-Martin Knaak
- gEDA-user: Re: Some pcb pecularities
joe tarantino
- gEDA-user: Footprint Library Updates at luciani.org
John Luciani
- gEDA-user: resistorpack12-1.sym have 12 resistors?
csanyipal
- gEDA-user: Need a Verilog test run
Stephen Williams
- gEDA-user: PCB gerber export problem - update
Tomaz Solc
- gEDA-user: PCB gerber export problem - update
DJ Delorie
- gEDA-user: Need a Verilog test run
Schulmeyer, K
- gEDA-user: Need a Verilog test run
carzrgr8 at optonline.net
- gEDA-user: resistorpack12-1.sym have 11 resistors?
csanyipal
- gEDA-user: Re: resistorpack12-1.sym have 11 resistors?
Kai-Martin Knaak
- gEDA-user: Free dogs in Southern California?
Michael Sokolov
- gEDA-user: Dual position resistors in gschem/pcb
Michael Sokolov
- gEDA-user: Dual position resistors in gschem/pcb
DJ Delorie
- gEDA-user: Dual position resistors in gschem/pcb
Lares Moreau
- gEDA-user: rs232 ferrite size?
DJ Delorie
- gEDA-user: how to covnert netlist to schema
ludovic smadja
- gEDA-user: bulk embeddeding?
Ales Hvezda
- gEDA-user: Re: gEDA-announce: GEDA Code Sprint -- Feb 10th. Mark
your calendars!
Ales Hvezda
- gEDA-user: Re: bulk embeddeding?
Ales Hvezda
- gEDA-user: Gschem q?
Ales Hvezda
- gEDA-user: bulk embeddeding?
DJ Delorie
- gEDA-user: rs232 ferrite size?
joeft
- gEDA-user: how to covnert netlist to schema
joeft
- gEDA-user: rs232 ferrite size?
Ostheller, Joel A.
- gEDA-user: rs232 ferrite size?
Peter Clifton
- gEDA-user: rs232 ferrite size?
DJ Delorie
- gEDA-user: rs232 ferrite size?
DJ Delorie
- gEDA-user: how to covnert netlist to schema
Ludovic SMADJA
- gEDA-user: rs232 ferrite size?
John Doty
- gEDA-user: rs232 ferrite size?
DJ Delorie
- gEDA-user: Galaksija motherboard
Tomaz Solc
- gEDA-user: Label Selection.
Lares Moreau
- gEDA-user: Label Selection.
Lares Moreau
- gEDA-user: Label Selection.
Ostheller, Joel A.
- gEDA-user: Galaksija motherboard
Stuart Brorson
- gEDA-user: Label Selection.
Harry Eaton
- gEDA-user: Galaksija motherboard
Tomaz Solc
- gEDA-user: Label Selection.
Tomaz Solc
- gEDA-user: Label Selection.
DJ Delorie
- gEDA-user: Label Selection.
Tomaz Solc
- gEDA-user: Galaksija motherboard
Jeff Webb
- gEDA-user: Label Selection.
Harry Eaton
- gEDA-user: Label Selection.
DJ Delorie
- gEDA-user: Galaksija motherboard
Tomaz Solc
- gEDA-user: Galaksija motherboard
DJ Delorie
- gEDA-user: PCB manufacture
Lares Moreau
- gEDA-user: PCB manufacture
Andy Peters
- gEDA-user: PCB - Rectangle/Polygon on pad
KURT PETERS
- gEDA-user: PTC thermistor footprint
Michael Sokolov
- gEDA-user: PCB - Rectangle/Polygon on pad
DJ Delorie
- gEDA-user: PTC thermistor footprint
Lares Moreau
- gEDA-user: PTC thermistor footprint
John Luciani
- gEDA-user: [pcb] lesstif netlist dialog enhancements
DJ Delorie
- gEDA-user: Fitting a hobbyist design into someone else's form factor
Michael Sokolov
- gEDA-user: Fitting a hobbyist design into someone else's form
factor
DJ Delorie
- gEDA-user: Fitting a hobbyist design into someone else's form
factor
Mike Hansen
- gEDA-user: Fitting a hobbyist design into someone else's form
factor
John Luciani
- gEDA-user: PCB manufacture
Patrick Doyle
- gEDA-user: PCB manufacture
David Carr
- gEDA-user: Fitting a hobbyist design into someone else's form
factor
Tomaz Solc
- gEDA-user: I need to open and print a PCB created in ExpressPCB:
What are my options?
Jeremy Pedersen
- gEDA-user: I need to open and print a PCB created in ExpressPCB:
What are my options?
DJ Delorie
- gEDA-user: I need to open and print a PCB created in ExpressPCB:
What are my options?
Mark Rages
- gEDA-user: I need to open and print a PCB created in ExpressPCB:
What are my options?
John Luciani
- gEDA-user: PCB multiple footprint selection
Ed & Angie S.
- gEDA-user: PCB multiple footprint selection
John Luciani
- gEDA-user: I need to open and print a PCB created in ExpressPCB:
What are my options?
DJ Delorie
- gEDA-user: PCB multiple footprint selection
phil at plastitar.com
- gEDA-user: I need to open and print a PCB created in ExpressPCB:
What are my options?
Jeremy Pedersen
- gEDA-user: I need to open and print a PCB created in ExpressPCB:
What are my options?
DJ Delorie
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
Ostheller, Joel A.
- gEDA-user: PCB multiple footprint selection
Ed & Angie S.
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
Lares Moreau
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
Jeremy Pedersen
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
DJ Delorie
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
John Luciani
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
Jeremy Pedersen
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
DJ Delorie
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
Mark Rages
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
Dave McGuire
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
John Luciani
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
Dave McGuire
- gEDA-user: PCB - Rectangle/Polygon on pad
Harry Eaton
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
DJ Delorie
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
Jeremy Pedersen
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
Peter Clifton
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
Mark Rages
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
DJ Delorie
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
John Luciani
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
John Luciani
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
DJ Delorie
- gEDA-user: I need to open and print a PCB created in
ExpressPCB:What are my options?
Dave McGuire
- gEDA-user: I need to open and print a PCB created
inExpressPCB:What are my options?
Ostheller, Joel A.
- gEDA-user: I need to open and print a PCB created
inExpressPCB:What are my options?
DJ Delorie
- gEDA-user: I need to open and print a PCB created
inExpressPCB:What are my options?
DJ Delorie
- gEDA-user: I need to open and print a PCB
createdinExpressPCB:What are my options?
Ostheller, Joel A.
- gEDA-user: I need to open and print a PCB
createdinExpressPCB:What are my options?
DJ Delorie
- gEDA-user: Re: Scope
Ostheller, Joel A.
- gEDA-user: Re: Scope
DJ Delorie
- gEDA-user: board cutout in PCB
Hans Nieuwenhuis
- gEDA-user: board cutout in PCB
DJ Delorie
- gEDA-user: I need to open and print a PCB
createdinExpressPCB:What are my options?
Jeremy Pedersen
- gEDA-user: board cutout in PCB
Hans Nieuwenhuis
- gEDA-user: I need to open and print a PCB created
in ExpressPCB:What are my options?
Darrell Harmon
- gEDA-user: I need to open and print a PCB created
in ExpressPCB:What are my options?
Dan McMahill
- gEDA-user: gnucap: Multi-disciplinary / mixed language simulation
Peter Clifton
- gEDA-user: I need to open and print a PCB created
in ExpressPCB:What are my options?
DJ Delorie
- gEDA-user: I need to open and print a PCB created
in ExpressPCB:What are my options?
Steve Meier
- gEDA-user: gnucap: Multi-disciplinary / mixed language simulation
Dan McMahill
- gEDA-user: gnucap: Multi-disciplinary / mixed language simulation
al davis
- gEDA-user: gnucap: Multi-disciplinary / mixed language simulation
Colin Hall
- gEDA-user: board cutout in PCB
Tomaz Solc
- gEDA-user: Re: I need to open and print a PCB created in
ExpressPCB:What are my options?
Levente Kovacs
- gEDA-user: Re: I need to open and print a PCB created in
ExpressPCB:What are my options?
Jeremy Pedersen
- gEDA-user: gnucap: Multi-disciplinary / mixed language simulation
Peter Clifton
- gEDA-user: gnucap: Multi-disciplinary / mixed language simulation
Peter Clifton
- gEDA-user: board cutout in PCB
DJ Delorie
- gEDA-user: gnucap: Multi-disciplinary / mixed language simulation
Peter Clifton
- gEDA-user: Re: I need to open and print a PCB created in
ExpressPCB:What are my options?
Dave McGuire
- gEDA-user: gnucap: Multi-disciplinary / mixed language simulation
al davis
- gEDA-user: gnucap: Multi-disciplinary / mixed language simulation
Dan McMahill
- gEDA-user: gnucap: Multi-disciplinary / mixed language simulation
Peter Clifton
- gEDA-user: gnucap: Multi-disciplinary / mixed language simulation
Peter Clifton
- gEDA-user: Re: I need to open and print a PCB created in
ExpressPCB:What are my options?
Jeremy Pedersen
- gEDA-user: Re: I need to open and print a PCB created in
ExpressPCB:What are my options?
Dave McGuire
- gEDA-user: I need to open and print a PCB created in ExpressPCB:
What are my options?
Karl.
- gEDA-user: I need to open and print a PCB created in ExpressPCB:
What are my options?
DJ Delorie
- gEDA-user: Re: I need to open and print a PCB created in
ExpressPCB:What are my options?
Jeremy Pedersen
Last message date:
Wed Jan 31 19:47:03 EDT 2007
Archived on: Wed Jan 31 19:47:07 EDT 2007
This archive was generated by
Pipermail 0.09 (Mailman edition).