February 2007 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Feb 1 00:20:42 EDT 2007
Ending: Wed Feb 28 22:03:07 EDT 2007
Messages: 637

• dxf? (was: Re: gEDA-user: Making an odd-shaped PCB)   Carlos Nieves Ónega
• gEDA-user: Re: dxf?   Carlos Nieves Ónega
• dxf? (was: Re: gEDA-user: Making an odd-shaped PCB)   Carlos Nieves Ónega
• gEDA-user: vhdl and gschem   Carlos Nieves Ónega
• gEDA-user: [pcb] printer calibration   Sten Björnebro
• gEDA-user: Icarus Verilog: Need for --enable-vvp32 in x86_64 ./configure call?   Günter Dannoritzer
• gEDA-user: Re: Icarus Verilog: Need for --enable-vvp32 in x86_64 ./configure call?   Günter Dannoritzer
• gEDA-user: Re: Icarus Verilog: Need for --enable-vvp32 in x86_64 ./configure call?   Günter Dannoritzer
• gEDA-user: newbie question: single layered pcb board   Donato Azevedo
• gEDA-user: newbie question: single layered pcb board   Donato Azevedo
• gEDA-user: Is the OrCAD Library Active?   Arthur Baldwin
• gEDA-user: gsch2pcb problems - I think!   Richard Balogh
• gEDA-user: Re: ground plane fill   Peter Baxendale
• gEDA-user: VMPlayer Image   Joshua Boyd
• gEDA-user: VMPlayer Image   Joshua Boyd
• gEDA-user: VMPlayer Image   Joshua Boyd
• gEDA-user: VMPlayer Image   Joshua Boyd
• gEDA-user: VMPlayer Image   Joshua Boyd
• gEDA-user: git repository now at repo.or.cz   Peter TB Brett
• gEDA-user: gEDA meeting in Sioux Falls SD   Peter TB Brett
• gEDA-user: Code sprint is next Saturday!   Stuart Brorson
• gEDA-user: February Code Sprint is Tomorrow!   Stuart Brorson
• gEDA-user: Code sprint aftermath... and proposal for next sprint!   Stuart Brorson
• gEDA-user: Updates to spice-sdb   Stuart Brorson
• gEDA-user: any tool for LVS   Stuart Brorson
• gEDA-user: changes to 0603 footprint?   Stuart Brorson
• gEDA-user: Next step questions   Stuart Brorson
• gEDA-user: Next step questions   Stuart Brorson
• gEDA-user: vhdl and gschem   Stuart Brorson
• gEDA-user: New gEDA Suite CD test release available   Stuart Brorson
• gEDA-user: New gEDA Suite CD test release available   Stuart Brorson
• gEDA-user: Re: New gEDA Suite CD test release available   Stuart Brorson
• gEDA-user: New gEDA Suite CD test release available   Stuart Brorson
• gEDA-user: Help - please   Stuart Brorson
• gEDA-user: Help - please   Stuart Brorson
• gEDA-user: Help - please   Stuart Brorson
• gEDA-user: gsch2pcb problems - I think!   Stuart Brorson
• gEDA-user: Which are the biggest looking gEDA warts?   Stuart Brorson
• gEDA-user: dinotrace (Re: Which are the biggest looking gEDA warts?)   Stuart Brorson
• gEDA-user: Which are the biggest looking gEDA warts? REQUEST TRACKER   Stuart Brorson
• gEDA-user: Zoom without cursor redraw in gschem (make it like PCB?)   Justyn Butler
• gEDA-user: Polygon clearance around a hole   Justyn Butler
• gEDA-user: Polygon clearance around a hole   Justyn Butler
• gEDA-user: Polygon clearance around a hole   Justyn Butler
• gEDA-user: Drawing a schematic with a single-inline resistornetwork   Peter Clifton
• gEDA-user: LED 100 != 5mm LED ?   Peter Clifton
• gEDA-user: minor PCB annoyance   Peter Clifton
• gEDA-user: Next step questions   Peter Clifton
• gEDA-user: Next step questions   Peter Clifton
• gEDA-user: Next step questions   Peter Clifton
• gEDA-user: Next step questions   Peter Clifton
• gEDA-user: Why use gEDA?   Peter Clifton
• gEDA-user: Why use gEDA?   Peter Clifton
• gEDA-user: Which are the biggest looking gEDA warts?   Peter Clifton
• gEDA-user: Why use gEDA?   Peter Clifton
• gEDA-user: Which are the biggest looking gEDA warts? REQUEST TRACKER   Peter Clifton
• gEDA-user: Why use gEDA?   Jorge Ernesto Guevara Cuenca
• gEDA-user: vhdl and gschem   Magnus Danielson
• gEDA-user: vhdl and gschem   Magnus Danielson
• gEDA-user: vhdl and gschem   Magnus Danielson
• gEDA-user: vhdl and gschem   Magnus Danielson
• gEDA-user: SPICE & gaf   Scott Dattalo
• gEDA-user: SPICE & gaf   Scott Dattalo
• gEDA-user: PCB silk label moving problem   DJ Delorie
• gEDA-user: PCB Silk Screen vs ViewMate   DJ Delorie
• gEDA-user: pcb bug(kinda)   DJ Delorie
• gEDA-user: PCB - grid dots not visible when board is flipped.   DJ Delorie
• gEDA-user: pcb -> shell command   DJ Delorie
• gEDA-user: pcb -> shell command   DJ Delorie
• gEDA-user: PCB - grid dots not visible when board is flipped.   DJ Delorie
• gEDA-user: Making an odd-shaped PCB   DJ Delorie
• gEDA-user: Making an odd-shaped PCB   DJ Delorie
• gEDA-user: Drawing a schematic with a single-inline resistor network   DJ Delorie
• gEDA-user: Drawing a schematic with a single-inline resistornetwork   DJ Delorie
• gEDA-user: Drawing a schematic with a single-inline resistornetwork   DJ Delorie
• gEDA-user: Re: dxf?   DJ Delorie
• gEDA-user: Re: dxf?   DJ Delorie
• gEDA-user: Polygons in footprints   DJ Delorie
• gEDA-user: Polygons in footprints   DJ Delorie
• gEDA-user: Re: dxf?   DJ Delorie
• gEDA-user: PCB layer names and colors --with-gui-lesstif   DJ Delorie
• gEDA-user: pcb-20070208 snapshot   DJ Delorie
• gEDA-user: PCB layer names and colors --with-gui-lesstif   DJ Delorie
• gEDA-user: Code Sprint prep.   DJ Delorie
• gEDA-user: [pcb] 'c' for center   DJ Delorie
• gEDA-user: [pcb] busy cursors   DJ Delorie
• gEDA-user: [pcb] printer calibration   DJ Delorie
• gEDA-user: LED 100 != 5mm LED ?   DJ Delorie
• gEDA-user: Rotations, rotations, rotations.   DJ Delorie
• gEDA-user: Re: ground plane fill   DJ Delorie
• gEDA-user: Re: ground plane fill   DJ Delorie
• gEDA-user: [pcb] embedding raster image size in png exports   DJ Delorie
• gEDA-user: [pcb] text line size fixed   DJ Delorie
• gEDA-user: fabs vs clipper   DJ Delorie
• gEDA-user: www.66each.com   DJ Delorie
• gEDA-user: www.66each.com   DJ Delorie
• gEDA-user: www.66each.com   DJ Delorie
• gEDA-user: www.66each.com   DJ Delorie
• gEDA-user: www.66each.com   DJ Delorie
• gEDA-user: www.66each.com   DJ Delorie
• gEDA-user: www.66each.com   DJ Delorie
• gEDA-user: gedasymbols.org lost/stopped serving a cvs user account (kind of)   DJ Delorie
• gEDA-user: Re: tested library of popular footprints.   DJ Delorie
• gEDA-user: www.66each.com   DJ Delorie
• gEDA-user: www.66each.com   DJ Delorie
• gEDA-user: www.66each.com   DJ Delorie
• gEDA-user: www.66each.com   DJ Delorie
• gEDA-user: minor PCB annoyance   DJ Delorie
• gEDA-user: DRC/rat quirks   DJ Delorie
• gEDA-user: changes to 0603 footprint?   DJ Delorie
• gEDA-user: DRC/rat quirks   DJ Delorie
• gEDA-user: DRC/rat quirks   DJ Delorie
• gEDA-user: Re: footprint bugs   DJ Delorie
• gEDA-user: Re: footprint bugs   DJ Delorie
• gEDA-user: even smaller...   DJ Delorie
• gEDA-user: PCB viewport moving when seleting from torn-off menus?   DJ Delorie
• gEDA-user: cut and paste between designs in PCB, gschem   DJ Delorie
• gEDA-user: Footprint for an SMT chip resistor array   DJ Delorie
• gEDA-user: symbol for DIL-16 & DIL-20 IC sockets?   DJ Delorie
• gEDA-user: symbol for DIL-16 & DIL-20 IC sockets?   DJ Delorie
• gEDA-user: symbol for DIL-16 & DIL-20 IC sockets?   DJ Delorie
• gEDA-user: symbol for DIL-16 & DIL-20 IC sockets?   DJ Delorie
• gEDA-user: symbol for DIL-16 & DIL-20 IC sockets?   DJ Delorie
• gEDA-user: Next step questions   DJ Delorie
• gEDA-user: Next step questions   DJ Delorie
• gEDA-user: Next step questions   DJ Delorie
• gEDA-user: Next step questions   DJ Delorie
• gEDA-user: Next step questions   DJ Delorie
• gEDA-user: Why does auto-mirror mirror the bottom?   DJ Delorie
• gEDA-user: YARR (refdes-update)   DJ Delorie
• gEDA-user: Why does auto-mirror mirror the bottom?   DJ Delorie
• gEDA-user: Why does auto-mirror mirror the bottom?   DJ Delorie
• gEDA-user: Why does auto-mirror mirror the bottom?   DJ Delorie
• gEDA-user: Why does auto-mirror mirror the bottom?   DJ Delorie
• gEDA-user: Improving the DRC error presentation   DJ Delorie
• gEDA-user: PCB : multiple polygons/planes on ground solder   DJ Delorie
• gEDA-user: DIY brass stencils   DJ Delorie
• gEDA-user: visualizing asynchronicity   DJ Delorie
• gEDA-user: gattrib for symbols?   DJ Delorie
• gEDA-user: Re: gattrib for symbols?   DJ Delorie
• gEDA-user: DIY brass stencils   DJ Delorie
• gEDA-user: DIY brass stencils   DJ Delorie
• gEDA-user: DIY brass stencils   DJ Delorie
• gEDA-user: DIY brass stencils   DJ Delorie
• gEDA-user: Polygon clearance around a hole   DJ Delorie
• gEDA-user: Polygon clearance around a hole   DJ Delorie
• gEDA-user: Ones & Zeros Technologies Pays PCB Design Engineers Royalties Same as Artists and Musicians   DJ Delorie
• gEDA-user: PCB Element for a Molex 71661-2068?   DJ Delorie
• gEDA-user: PCB Element for a Molex 71661-2068?   DJ Delorie
• gEDA-user: making footprint gifs   DJ Delorie
• gEDA-user: making footprint gifs   DJ Delorie
• gEDA-user: making footprint gifs   DJ Delorie
• gEDA-user: PCB slowdown?   DJ Delorie
• gEDA-user: A (premature) release of SmartDisperse plugin   DJ Delorie
• gEDA-user: PCB slowdown?   DJ Delorie
• gEDA-user: The amazing Align/Distribute plugin   DJ Delorie
• gEDA-user: The amazing Align/Distribute plugin   DJ Delorie
• gEDA-user: Why use gEDA?   DJ Delorie
• gEDA-user: Which are the biggest looking gEDA warts?   DJ Delorie
• gEDA-user: Which are the biggest looking gEDA warts?   DJ Delorie
• gEDA-user: Why use gEDA?   DJ Delorie
• gEDA-user: DRC problem at close pads   DJ Delorie
• gEDA-user: DRC: "Line with insufficient clearance inside polygon"   DJ Delorie
• gEDA-user: new boards!   DJ Delorie
• gEDA-user: new boards!   DJ Delorie
• gEDA-user: PCB question   DJ Delorie
• gEDA-user: PCB question   DJ Delorie
• gEDA-user: Re: PCB question   DJ Delorie
• gEDA-user: How to maybe get your favorite misfeatures fixed (was: Re: PCB question)   DJ Delorie
• gEDA-user: Re: How to maybe get your favorite misfeatures fixed (was: Re: PCB question)   DJ Delorie
• gEDA-user: Re: How to maybe get your favorite misfeatures fixed (was: Re: PCB question)   DJ Delorie
• gEDA-user: In pcb, can I select and change batches of lines, vias, and pads?   DJ Delorie
• gEDA-user: Is the OrCAD Library Active?   Patrick Doyle
• gEDA-user: PCB autoroute   Harry Eaton
• gEDA-user: pcb bug(kinda)   Harry Eaton
• gEDA-user: PCB-> net specific constraint   Harry Eaton
• gEDA-user: Re: ground plane fill   Harry Eaton
• gEDA-user: fabs vs clipper   Harry Eaton
• gEDA-user: ratsnest and auto DRC also a bit about poly features was www.66each.com   Harry Eaton
• gEDA-user: pcb-20070208 snapshot   Harry Eaton
• gEDA-user: Rotations, rotations, rotations.   Harry Eaton
• gEDA-user: DRC/rat quirks   Harry Eaton
• gEDA-user: DRC/rat quirks   Harry Eaton
• gEDA-user: Next step questions   Harry Eaton
• gEDA-user: PCB slowdown?   Harry Eaton
• gEDA-user: hidden gui "state" in PCB (gtk-hid)?   Matt Ettus
• gEDA-user: www.66each.com   Matt Ettus
• gEDA-user: changes to 0603 footprint?   Matt Ettus
• gEDA-user: changing text size in PCB   Matt Ettus
• gEDA-user: In pcb, can I select and change batches of lines, vias, and pads?   David Froseth
• gEDA-user: In pcb, can I select and change batches of lines, vias, and pads?   David Froseth
• gEDA-user: vhdl and gschem   Chitlesh GOORAH
• gEDA-user: vhdl and gschem   Chitlesh GOORAH
• gEDA-user: vhdl and gschem   Chitlesh GOORAH
• gEDA-user: Drawing a schematic with a single-inline resistornetwork   John Griessen
• gEDA-user: changes to 0603 footprint?   John Griessen
• gEDA-user: pcb-20070208 snapshot   John Griessen
• gEDA-user: cut and paste between designs in PCB, gschem   John Griessen
• gEDA-user: [Proposal] - a new project manager ???   John Griessen
• gEDA-user: VMPlayer Image   John Griessen
• gEDA-user: Re: VMPlayer Image   John Griessen
• gEDA-user: YARR (refdes-update)   John Griessen
• gEDA-user: Why does auto-mirror mirror the bottom?   John Griessen
• gEDA-user: Why does auto-mirror mirror the bottom?   John Griessen
• gEDA-user: Re: VMPlayer Image   John Griessen
• gEDA-user: Re: VMPlayer Image   John Griessen
• gEDA-user: Re: VMPlayer Image   John Griessen
• gEDA-user: vhdl and gschem   John Griessen
• gEDA-user: YARR (grefdes) for refdes renumbering   John Griessen
• gEDA-user: PCB : multiple polygons/planes on ground solder   John Griessen
• gEDA-user: Re: VMPlayer Image   John Griessen
• gEDA-user: DIY brass stencils   John Griessen
• gEDA-user: DIY brass stencils   John Griessen
• gEDA-user: DIY brass stencils   John Griessen
• gEDA-user: making footprint gifs   John Griessen
• gEDA-user: making footprint gifs   John Griessen
• gEDA-user: Help - please   John Griessen
• gEDA-user: Why use gEDA?   John Griessen
• gEDA-user: Which are the biggest looking gEDA warts?   John Griessen
• gEDA-user: Which are the biggest looking gEDA warts?   John Griessen
• gEDA-user: Re: Which are the biggest looking gEDA warts?   John Griessen
• gEDA-user: Which are the biggest looking gEDA warts?   John Griessen
• gEDA-user: Why use gEDA?   John Griessen
• gEDA-user: Which are the biggest looking gEDA warts?   John Griessen
• gEDA-user: gnetlist -gdrc2 output   John Griessen
• gEDA-user: nets in symbols   John Griessen
• gEDA-user: google checkout buttons to implement SW development bounties   John Griessen
• gEDA-user: In pcb, can I select and change batches of lines, vias, and pads?   John Griessen
• gEDA-user: Re: google checkout buttons to implement SW development bounties   John Griessen
• gEDA-user: www.66each.com   Mike Hansen
• gEDA-user: www.66each.com   Mike Hansen
• gEDA-user: VMPlayer Image   Mike Hansen
• gEDA-user: Re: VMPlayer Image   Mike Hansen
• gEDA-user: VMPlayer Image   Mike Hansen
• gEDA-user: Re: VMPlayer Image   Mike Hansen
• gEDA-user: Re: VMPlayer Image   Mike Hansen
• gEDA-user: Re: VMPlayer Image   Mike Hansen
• gEDA-user: www.66each.com   Darrell Harmon
• gEDA-user: symbol for dual optocoupler   Tuck Hartshorn
• gEDA-user: Re: gEDA: inter page connectors   Werner Hoch
• gEDA-user: dinotrace (Re: Which are the biggest looking gEDA warts?)   Werner Hoch
• gEDA-user: Installer suddenly dying on Mandriva 2007.0   Al Hooton
• gEDA-user: Installer suddenly dying on Mandriva 2007.0   Al Hooton
• gEDA-user: Re: LED 100 != 5mm LED ?   Ales Hvezda
• gEDA-user: Zoom without cursor redraw in gschem (make it like PCB?)   Ales Hvezda
• gEDA-user: gEDA code sprint and donations   Ales Hvezda
• gEDA-user: YARR (refdes-update)   Ales Hvezda
• gEDA-user: bulk embeddeding?   Ales Hvezda
• gEDA-user: Re: I need to open and print a PCB created in ExpressPCB:What are my options?   Ales Hvezda
• gEDA-user: gattrib for symbols?   Ales Hvezda
• gEDA-user: gsch2pcb problems - I think!   Ales Hvezda
• gEDA-user: How to find latest gEDA sources   Ales Hvezda
• gEDA-user: gsch2pcb   Ales Hvezda
• gEDA-user: Code sprint aftermath... and proposal for next sprint!   Ales Hvezda
• gEDA-user: Help - please   Ales Hvezda
• gEDA-user: How to maybe get your favorite misfeatures fixed (was: Re: PCB question)   Ales Hvezda
• gEDA-user: Re: google checkout buttons to implement SW development bounties   Samuel A. Falvo II
• gEDA-user: hidden gui "state" in PCB (gtk-hid)?   Igor2
• gEDA-user: Re: dxf?   Igor2
• gEDA-user: Re: dxf?   Igor2
• gEDA-user: Re: VMPlayer Image   Igor2
• gEDA-user: Re: VMPlayer Image   Igor2
• gEDA-user: Fix for infinite loop in m4 macros   Ben Jackson
• gEDA-user: Re: ground plane fill   Ben Jackson
• gEDA-user: www.66each.com   Ben Jackson
• gEDA-user: www.66each.com   Ben Jackson
• gEDA-user: DRC/rat quirks   Ben Jackson
• gEDA-user: DRC/rat quirks   Ben Jackson
• gEDA-user: PCB viewport moving when seleting from torn-off menus?   Ben Jackson
• gEDA-user: PCB viewport moving when seleting from torn-off menus?   Ben Jackson
• gEDA-user: Next step questions   Ben Jackson
• gEDA-user: Why does auto-mirror mirror the bottom?   Ben Jackson
• gEDA-user: YARR (refdes-update)   Ben Jackson
• gEDA-user: Why does auto-mirror mirror the bottom?   Ben Jackson
• gEDA-user: Why does auto-mirror mirror the bottom?   Ben Jackson
• gEDA-user: Why does auto-mirror mirror the bottom?   Ben Jackson
• gEDA-user: Improving the DRC error presentation   Ben Jackson
• gEDA-user: Next step questions   Ben Jackson
• gEDA-user: Repro for "Undo bad serial number"   Ben Jackson
• gEDA-user: Autocrop() plugin for PCB   Ben Jackson
• gEDA-user: DIY brass stencils   Ben Jackson
• gEDA-user: DIY brass stencils   Ben Jackson
• gEDA-user: PCB Element for a Molex 71661-2068?   Ben Jackson
• gEDA-user: PCB Element for a Molex 71661-2068?   Ben Jackson
• gEDA-user: Making gsch2pcb prefer files vs m4?   Ben Jackson
• gEDA-user: PCB slowdown?   Ben Jackson
• gEDA-user: PCB slowdown?   Ben Jackson
• gEDA-user: PCB slowdown?   Ben Jackson
• gEDA-user: A (premature) release of SmartDisperse plugin   Ben Jackson
• gEDA-user: The amazing Align/Distribute plugin   Ben Jackson
• gEDA-user: Why use gEDA?   Ben Jackson
• gEDA-user: Which are the biggest looking gEDA warts?   Ben Jackson
• gEDA-user: Which are the biggest looking gEDA warts?   Ben Jackson
• gEDA-user: Which are the biggest looking gEDA warts?   Ben Jackson
• gEDA-user: Why use gEDA?   Ben Jackson
• gEDA-user: PCB question   Ben Jackson
• gEDA-user: newbie question: single layered pcb board   Ben Jackson
• gEDA-user: Newbie question regarding a gnetlist error   Seb James
• gEDA-user: Newbie question regarding a gnetlist error   Seb James
• gEDA-user: gnetlist -gdrc2 output   Seb James
• gEDA-user: gnetlist -gdrc2 output   Seb James
• gEDA-user: gnetlist -gdrc2 output   Seb James
• gEDA-user: nets in symbols   Seb James
• gEDA-user: nets in symbols   Seb James
• gEDA-user: nets in symbols   Seb James
• gEDA-user: Windows install   David Kerber
• gEDA-user: Re: Windows install   David Kerber
• gEDA-user: Re: Making an odd-shaped PCB   Kai-Martin Knaak
• gEDA-user: Re: Making an odd-shaped PCB   Kai-Martin Knaak
• gEDA-user: Re: dxf?   Kai-Martin Knaak
• gEDA-user: Re: ground plane fill   Kai-Martin Knaak
• gEDA-user: Re: ground plane fill   Kai-Martin Knaak
• gEDA-user: Re: LED 100 != 5mm LED ?   Kai-Martin Knaak
• gEDA-user: Re: ground plane fill   Kai-Martin Knaak
• gEDA-user: Re: ground plane fill   Kai-Martin Knaak
• gEDA-user: Re: LED 100 != 5mm LED ?   Kai-Martin Knaak
• gEDA-user: Re: footprint bugs   Kai-Martin Knaak
• gEDA-user: Re: pcb-20070208 snapshot   Kai-Martin Knaak
• gEDA-user: Re: footprint bugs   Kai-Martin Knaak
• gEDA-user: Re: VMPlayer Image   Kai-Martin Knaak
• gEDA-user: Re: VMPlayer Image   Kai-Martin Knaak
• gEDA-user: Re: VMPlayer Image   Kai-Martin Knaak
• gEDA-user: Re: VMPlayer Image   Kai-Martin Knaak
• gEDA-user: Re: VMPlayer Image   Kai-Martin Knaak
• gEDA-user: Re: VMPlayer Image   Kai-Martin Knaak
• gEDA-user: Re: Which are the biggest looking gEDA warts?   Kai-Martin Knaak
• gEDA-user: Autochar by Robert Yu is available   Raghu Kodali
• gEDA-user: any tool for LVS   Raghu Kodali
• gEDA-user: any tool for LVS   Raghu Kodali
• gEDA-user: LEF Parser. License questions   Raghu Kodali
• gEDA-user: LEF Parser. License questions   Raghu Kodali
• gEDA-user: DRC problem at close pads   David Kuehling
• gEDA-user: DRC: "Line with insufficient clearance inside polygon"   David Kuehling
• gEDA-user: DRC: "Line with insufficient clearance inside polygon"   David Kuehling
• gEDA-user: DRC problem at close pads   David Kuehling
• gEDA-user: DRC: "Element Z50 has 5 silk lines which are too thin"   David Kuehling
• gEDA-user: DRC: "Element Z50 has 5 silk lines which are too thin"   David Kuehling
• gEDA-user: DRC problem at close pads   David Kuehling
• gEDA-user: Re: How to maybe get your favorite misfeatures fixed (was: Re: PCB question)   David Kuehling
• gEDA-user: Panelizing methods?   John Luciani
• gEDA-user: Re: footprint bugs   John Luciani
• gEDA-user: Re: footprint bugs   John Luciani
• gEDA-user: New Footprints   John Luciani
• gEDA-user: Footprint for an SMT chip resistor array   John Luciani
• gEDA-user: symbol for DIL-16 & DIL-20 IC sockets?   John Luciani
• gEDA-user: symbol for DIL-16 & DIL-20 IC sockets?   John Luciani
• gEDA-user: Next step questions   John Luciani
• gEDA-user: YARR (refdes-update)   John Luciani
• gEDA-user: Improving the DRC error presentation   John Luciani
• gEDA-user: making footprint gifs   John Luciani
• gEDA-user: making footprint gifs   John Luciani
• gEDA-user: PCB Element for a Molex 71661-2068?   John Luciani
• gEDA-user: Footprint Changes at luciani.org   John Luciani
• gEDA-user: The amazing Align/Distribute plugin   John Luciani
• gEDA-user: gnetlist -gdrc2 output   John Luciani
• gEDA-user: PCB Element Positions   John Luciani
• gEDA-user: Master Parts List   John Luciani
• gEDA-user: Master Parts List   John Luciani
• gEDA-user: Drawing a schematic with a single-inline resistornetwork   Dave McGuire
• gEDA-user: [pcb] printer calibration   Dave McGuire
• gEDA-user: vhdl and gschem   Dave McGuire
• gEDA-user: DIY brass stencils   Dave McGuire
• gEDA-user: Why use gEDA?   Dave McGuire
• gEDA-user: PCB autoroute   Dan McMahill
• gEDA-user: pcb-20070208 snapshot   Dan McMahill
• gEDA-user: gsch2pcb problem - latest CVS or latest Suse 10.1 upgrade?   Dan McMahill
• gEDA-user: RE: pcb-20070208 snapshot   Dan McMahill
• gEDA-user: Re: gsch2pcb problem - latest CVS or latest Suse 10.1 upgrade?   Dan McMahill
• gEDA-user: Code Sprint prep.   Dan McMahill
• gEDA-user: Re: ground plane fill   Dan McMahill
• gEDA-user: LED 100 != 5mm LED ?   Dan McMahill
• gEDA-user: Re: ground plane fill   Dan McMahill
• gEDA-user: Re: LED 100 != 5mm LED ?   Dan McMahill
• gEDA-user: IEEE Spectrum DIY contest   Dan McMahill
• gEDA-user: Re: footprint bugs   Dan McMahill
• gEDA-user: Re: LED 100 != 5mm LED ?   Dan McMahill
• gEDA-user: changes to 0603 footprint?   Dan McMahill
• gEDA-user: Re: footprint bugs   Dan McMahill
• gEDA-user: Re: footprint bugs   Dan McMahill
• gEDA-user: Re: pcb-20070208 snapshot   Dan McMahill
• gEDA-user: Footprint for an SMT chip resistor array   Dan McMahill
• gEDA-user: PCB Element for a Molex 71661-2068?   Dan McMahill
• gEDA-user: making footprint gifs   Dan McMahill
• gEDA-user: making footprint gifs   Dan McMahill
• gEDA-user: Help - please   Dan McMahill
• gEDA-user: gsch2pcb problems - I think!   Dan McMahill
• gEDA-user: Help - please   Dan McMahill
• gEDA-user: gsch2pcb problems - I think!   Dan McMahill
• gEDA-user: gsch2pcb problems - I think!   Dan McMahill
• gEDA-user: Making gsch2pcb prefer files vs m4?   Dan McMahill
• gEDA-user: gsch2pcb problems - I think!   Dan McMahill
• gEDA-user: PCB slowdown?   Dan McMahill
• gEDA-user: gsch2pcb problems - I think!   Dan McMahill
• gEDA-user: Why use gEDA?   Dan McMahill
• gEDA-user: Why use gEDA?   Dan McMahill
• gEDA-user: Which are the biggest looking gEDA warts?   Dan McMahill
• gEDA-user: Re: Which are the biggest looking gEDA warts?   Dan McMahill
• gEDA-user: Which are the biggest looking gEDA warts?   Dan McMahill
• gEDA-user: Why use gEDA?   Dan McMahill
• gEDA-user: Which are the biggest looking gEDA warts? REQUEST TRACKER   Dan McMahill
• gEDA-user: Which are the biggest looking gEDA warts?   Dan McMahill
• gEDA-user: Which are the biggest looking gEDA warts?   Dan McMahill
• gEDA-user: Which are the biggest looking gEDA warts?   Dan McMahill
• gEDA-user: DRC problem at close pads   Dan McMahill
• gEDA-user: DRC: "Element Z50 has 5 silk lines which are too thin"   Dan McMahill
• gEDA-user: PCB question   Dan McMahill
• gEDA-user: DRC problem at close pads   Dan McMahill
• gEDA-user: Re: How to maybe get your favorite misfeatures fixed (was: Re: PCB question)   Dan McMahill
• gEDA-user: library bug   Dan McMahill
• gEDA-user: PCB silk label moving problem   Meador, Ryan D
• gEDA-user: Ones & Zeros Technologies Pays PCB Design Engineers Royalties Same as Artists and Musicians   Steve Meier
• gEDA-user: PCB Element for a Molex 71661-2068?   Steve Meier
• gEDA-user: Panelizing methods?   Lares Moreau
• gEDA-user: pcb bug(kinda)   Lares Moreau
• gEDA-user: Vendor map   Lares Moreau
• gEDA-user: Support for heterogeneous symbols?   Lares Moreau
• gEDA-user: Code Sprint prep.   Lares Moreau
• gEDA-user: Re: Code Sprint prep.   Lares Moreau
• gEDA-user: Rotations, rotations, rotations.   Lares Moreau
• gEDA-user: ground plane fill   Lares Moreau
• gEDA-user: PCB Element for a Molex 71661-2068?   Marc Moreau
• gEDA-user: making footprint gifs   Marc Moreau
• gEDA-user: making footprint gifs   Marc Moreau
• gEDA-user: I'm looking for a draw [jaw] dropping Autorouter demo   Marc Moreau
• gEDA-user: Which are the biggest looking gEDA warts?   Marc Moreau
• gEDA-user: nets in symbols   Marc Moreau
• gEDA-user: nets in symbols   Marc Moreau
• gEDA-user: Re: VMPlayer Image   Steve Morss
• gEDA-user: Re: VMPlayer Image   Steve Morss
• gEDA-user: PCB Element for a Molex 71661-2068?   Steve Morss
• gEDA-user: PCB Element for a Molex 71661-2068?   Steve Morss
• dxf? (was: Re: gEDA-user: Making an odd-shaped PCB)   Dave N6NZ
• gEDA-user: Re: dxf?   Dave N6NZ
• gEDA-user: Re: dxf?   Dave N6NZ
• gEDA-user: Re: dxf?   Dave N6NZ
• gEDA-user: Re: dxf?   Dave N6NZ
• gEDA-user: Next step questions   Craig Niederberger
• gEDA-user: Next step questions   Craig Niederberger
• gEDA-user: Next step questions   Craig Niederberger
• gEDA-user: Next step questions   Craig Niederberger
• gEDA-user: Next step questions   Craig Niederberger
• gEDA-user: Next step questions   Craig Niederberger
• gEDA-user: VMPlayer Image   Craig Niederberger
• gEDA-user: Next step questions   Craig Niederberger
• gEDA-user: Next step questions   Craig Niederberger
• gEDA-user: Next step questions   Craig Niederberger
• gEDA-user: Next step questions   Craig Niederberger
• gEDA-user: Next step questions   Craig Niederberger
• gEDA-user: Next step questions   Craig Niederberger
• gEDA-user: In pcb, can I select and change batches of lines, vias, and pads?   Craig Niederberger
• gEDA-user: PCB: Polygon segfault   Hans Nieuwenhuis
• gEDA-user: PCB -> find, rip-up patch   Hans Nieuwenhuis
• gEDA-user: Making an odd-shaped PCB   Hans Nieuwenhuis
• gEDA-user: PCB-> net specific constraint   Hans Nieuwenhuis
• gEDA-user: PCB -> find, rip-up patch   Hans Nieuwenhuis
• gEDA-user: PCB slowdown?   Hans Nieuwenhuis
• gEDA-user: PCB Silk Screen vs ViewMate   Ostheller, Joel A.
• gEDA-user: Drawing a schematic with a single-inline resistornetwork   Ostheller, Joel A.
• gEDA-user: Re: LED 100 != 5mm LED ?   Ostheller, Joel A.
• gEDA-user: Re: LED 100 != 5mm LED ?   Ostheller, Joel A.
• gEDA-user: www.66each.com   Ostheller, Joel A.
• gEDA-user: www.66each.com   Ostheller, Joel A.
• gEDA-user: www.66each.com   Ostheller, Joel A.
• gEDA-user: vhdl and gschem   Ostheller, Joel A.
• gEDA-user: PCB : multiple polygons/planes on ground solder   Ostheller, Joel A.
• gEDA-user: Ones & Zeros Technologies Pays PCB Design EngineersRoyalties Same as Artists and Musicians   Ostheller, Joel A.
• gEDA-user: DRC problem at close pads   Ostheller, Joel A.
• gEDA-user: new boards!   Ostheller, Joel A.
• gEDA-user: PCB - grid dots not visible when board is flipped.   KURT PETERS
• gEDA-user: PCB autoroute   KURT PETERS
• gEDA-user: PCB autoroute   KURT PETERS
• gEDA-user: gsch2pcb problem - latest CVS or latest Suse 10.1 upgrade?   KURT PETERS
• gEDA-user: gsch2pcb problem - latest CVS or latest Suse 10.1 upgrade?   KURT PETERS
• gEDA-user: RE: pcb-20070208 snapshot   KURT PETERS
• gEDA-user: RE: pcb-20070208 snapshot   KURT PETERS
• gEDA-user: Re: gsch2pcb problem - latest CVS or latest Suse 10.1 upgrade?   KURT PETERS
• gEDA-user: RE: pcb-20070208 snapshot   KURT PETERS
• gEDA-user: DRC/rat quirks   KURT PETERS
• gEDA-user: gsch2pcb   KURT PETERS
• gEDA-user: Ones & Zeros Technologies Pays PCB Design Engineers Royalties Same as Artists and Musicians   Bob Paddock
• gEDA-user: Ones & Zeros Technologies Pays PCB Design Engineers Royalties Same as Artists and Musicians   Bob Paddock
• gEDA-user: I'm looking for a draw dropping Autorouter demo   Bob Paddock
• gEDA-user: I'm looking for a draw [jaw] dropping Autorouter demo   Bob Paddock
• gEDA-user: Which are the biggest looking gEDA warts?   Bob Paddock
• gEDA-user: Master Parts List   Bob Paddock
• gEDA-user: Re: I need to open and print a PCB created in ExpressPCB:What are my options?   Jeremy Pedersen
• gEDA-user: Drawing a schematic with a single-inline resistor network   Jeremy Pedersen
• gEDA-user: Drawing a schematic with a single-inline resistornetwork   Jeremy Pedersen
• gEDA-user: Drawing a schematic with a single-inline resistornetwork   Jeremy Pedersen
• gEDA-user: Drawing a schematic with a single-inline resistornetwork   Jeremy Pedersen
• gEDA-user: Drawing a schematic with a single-inline resistornetwork   Jeremy Pedersen
• gEDA-user: Drawing a schematic with a single-inline resistornetwork   Jeremy Pedersen
• gEDA-user: New Footprints   Jeremy Pedersen
• gEDA-user: Re: I need to open and print a PCB created in ExpressPCB:What are my options?   Jeremy Pedersen
• gEDA-user: Re: ground plane fill   Andy Peters
• gEDA-user: Re: LED 100 != 5mm LED ?   Andy Peters
• gEDA-user: Re: LED 100 != 5mm LED ?   Andy Peters
• gEDA-user: www.66each.com   Andy Peters
• gEDA-user: www.66each.com   Andy Peters
• gEDA-user: vhdl and gschem   Andy Peters
• gEDA-user: Ones & Zeros Technologies Pays PCB Design Engineers Royalties Same as Artists and Musicians   Andy Peters
• gEDA-user: Which are the biggest looking gEDA warts?   Andy Peters
• gEDA-user: Re: dxf?   Mark Rages
• gEDA-user: Re: LED 100 != 5mm LED ?   Mark Rages
• gEDA-user: Re: LED 100 != 5mm LED ?   Mark Rages
• gEDA-user: www.66each.com   Mark Rages
• gEDA-user: Re: footprint bugs   Mark Rages
• gEDA-user: wasteful for all gEDA users to be doing footprint libraries separately   Mark Rages
• gEDA-user: Re: I need to open and print a PCB created in ExpressPCB:What are my options?   Mark Rages
• gEDA-user: YARR (grefdes) for refdes renumbering   Rik
• gEDA-user: [Proposal] - a new project manager ???   Ludovic SMADJA
• gEDA-user: How to find latest gEDA sources   Stefan Salewski
• gEDA-user: Re: New gEDA Suite CD test release available   Stefan Salewski
• gEDA-user: pcb -> shell command   Tom Schouten
• gEDA-user: pcb -> shell command   Tom Schouten
• gEDA-user: ground plane fill   Ryan Seal
• gEDA-user: minor PCB annoyance   Ryan Seal
• gEDA-user: minor PCB annoyance   Ryan Seal
• gEDA-user: PCB : multiple polygons/planes on ground solder   Simon_T
• gEDA-user: gsch2pcb problems - I think!   Harold D. Skank
• gEDA-user: New gEDA Suite CD test release available   Harold D. Skank
• gEDA-user: New gEDA Suite CD test release available   Harold D. Skank
• gEDA-user: Help - please   Harold D. Skank
• gEDA-user: gsch2pcb problems - I think!   Harold D. Skank
• gEDA-user: Help - please   Harold D. Skank
• gEDA-user: gsch2pcb problems - I think!   Harold D. Skank
• gEDA-user: gsch2pcb problems - I think!   Harold D. Skank
• gEDA-user: Recent symbol/pcb-footprint problems   Harold D. Skank
• gEDA-user: Making an odd-shaped PCB   Michael Sokolov
• gEDA-user: Making an odd-shaped PCB   Michael Sokolov
• gEDA-user: Support for heterogeneous symbols?   Michael Sokolov
• gEDA-user: Footprint for an SMT chip resistor array   Michael Sokolov
• gEDA-user: cut and paste between designs in PCB, gschem   Michael Sokolov
• gEDA-user: Footprint for an SMT chip resistor array   Michael Sokolov
• gEDA-user: Footprint for an SMT chip resistor array   Michael Sokolov
• gEDA-user: hidden gui "state" in PCB (gtk-hid)?   Tomaz Solc
• gEDA-user: Re: Windows install   Cesar Strauss
• gEDA-user: Re: dxf?   Bert Timmerman
• gEDA-user: LED 100 != 5mm LED ?   Bert Timmerman
• gEDA-user: LED 100 != 5mm LED ?   Bert Timmerman
• dxf? (was: Re: gEDA-user: Making an odd-shaped PCB)   Bert Timmerman
• gEDA-user: Re: LED 100 != 5mm LED ?   Bert Timmerman
• gEDA-user: Master Parts List   Bert Timmerman
• gEDA-user: new footprints added at gedasymbols.org   Christian Treldal
• gEDA-user: library bug   The User
• gEDA-user: gEDA meeting in Sioux Falls SD   Jeff VR
• gEDA-user: gEDA meeting in Sioux Falls SD   Jeff VR
• gEDA-user: gEDA meeting in Sioux Falls SD   Jeff VR
• gEDA-user: VMPlayer Image   Jeff VR
• gEDA-user: VMPlayer Image   Jeff VR
• gEDA-user: New gEDA Suite CD test release available   Ray Warren
• gEDA-user: New gEDA Suite CD test release available   Ray Warren
• gEDA-user: Re: Icarus Verilog: Need for --enable-vvp32 in x86_64 ./configure call?   Stephen Williams
• gEDA-user: Re: Icarus Verilog: Need for --enable-vvp32 in x86_64 ./configure call?   Stephen Williams
• gEDA-user: Re: Icarus Verilog: Need for --enable-vvp32 in x86_64 ./configure call?   Stephen Williams
• gEDA-user: gattrib for symbols?   Stephen Williams
• gEDA-user: Re: gattrib for symbols?   Stephen Williams
• gEDA-user: Re: Which are the biggest looking gEDA warts?   Stephen Williams
• gEDA-user: Re: Which are the biggest looking gEDA warts?   Stephen Williams
• gEDA-user: dinotrace (Re: Which are the biggest looking gEDA warts?)   Stephen Williams
• gEDA-user: PCB question   Stephen Williams
• gEDA-user: Re: PCB question   Stephen Williams
• gEDA-user: Re: PCB question   Stephen Williams
• gEDA-user: Re: How to maybe get your favorite misfeatures fixed (was: Re: PCB question)   Stephen Williams
• gEDA-user: Re: How to maybe get your favorite misfeatures fixed (was: Re: PCB question)   Stephen Williams
• gEDA-user: Re: How to maybe get your favorite misfeatures fixed (was: Re: PCB question)   Stephen Williams
• gEDA-user: Re: How to maybe get your favorite misfeatures fixed (was: Re: PCB question)   Stephen Williams
• gEDA-user: Re: google checkout buttons to implement SW development bounties   Stephen Williams
• gEDA-user: Re: google checkout buttons to implement SW development bounties   Stephen Williams
• gEDA-user: Re: google checkout buttons to implement SW development bounties   Stephen Williams
• gEDA-user: LM318 , LT318 any difference?   carzrgr8 at optonline.net
• gEDA-user: symbol for DIL-16 & DIL-20 IC sockets?   csanyipal
• gEDA-user: symbol for DIL-16 & DIL-20 IC sockets?   csanyipal
• gEDA-user: symbol for DIL-16 & DIL-20 IC sockets?   csanyipal
• gEDA-user: symbol for DIL-16 & DIL-20 IC sockets?   csanyipal
• gEDA-user: symbol for dual optocoupler   csanyipal
• gEDA-user: VMPlayer Image   al davis
• gEDA-user: VMPlayer Image   al davis
• gEDA-user: VMPlayer Image   al davis
• gEDA-user: LM318 , LT318 any difference?   al davis
• gEDA-user: LEF Parser. License questions   al davis
• gEDA-user: LEF Parser. License questions   al davis
• gEDA-user: vhdl and gschem   al davis
• gEDA-user: vhdl and gschem   al davis
• gEDA-user: vhdl and gschem   al davis
• gEDA-user: New gnucap development snapshot   al davis
• gEDA-user: Why use gEDA?   al davis
• gEDA-user: Why use gEDA?   al davis
• gEDA-user: Why use gEDA?   al davis
• gEDA-user: How to maybe get your favorite misfeatures fixed (was: Re: PCB question)   al davis
• gEDA-user: Re: How to maybe get your favorite misfeatures fixed (was: Re: PCB question)   al davis
• gEDA-user: Re: google checkout buttons to implement SW development bounties   al davis
• gEDA-user: Re: google checkout buttons to implement SW development bounties   al davis
• gEDA-user: scons   al davis
• gEDA-user: Re: Windows install   evan foss
• gEDA-user: Support for heterogeneous symbols?   fricker
• gEDA-user: Support for heterogeneous symbols?   fricker
• gEDA-user: Re: gEDA: inter page connectors   fricker
• gEDA-user: Re: gEDA: inter page connectors   fricker
• gEDA-user: Re: gEDA: inter page connectors   fricker
• gEDA-user: PCB - grid dots not visible when board is flipped.   joeft
• gEDA-user: PCB - grid dots not visible when board is flipped.   joeft
• gEDA-user: [pcb] text line size fixed   joeft
• gEDA-user: Footprint for an SMT chip resistor array   joeft
• gEDA-user: Footprint for an SMT chip resistor array   joeft
• gEDA-user: Installer suddenly dying on Mandriva 2007.0   joeft
• gEDA-user: Re: dxf?   john at ecosensory.com
• gEDA-user: Re: dxf?   john at ecosensory.com
• gEDA-user: Support for heterogeneous symbols?   john at ecosensory.com
• gEDA-user: Re: dxf?   john at ecosensory.com
• gEDA-user: RE: pcb-20070208 snapshot   john at ecosensory.com
• gEDA-user: PCB layer names and colors --with-gui-lesstif   john at ecosensory.com
• gEDA-user: pcb-20070208 snapshot   john at ecosensory.com
• gEDA-user: PCB layer names and colors --with-gui-lesstif   john at ecosensory.com
• gEDA-user: PCB layer names and colors --with-gui-lesstif   john at ecosensory.com
• gEDA-user: [pcb] printer calibration   john at ecosensory.com
• gEDA-user: Re: ground plane fill   john at ecosensory.com
• gEDA-user: gedasymbols.org lost/stopped serving a cvs user account (kind of)   john at ecosensory.com
• gEDA-user: [pcb] embedding raster image size in png exports   john at ecosensory.com
• gEDA-user: wasteful for all gEDA users to be doing footprint libraries separately   john at ecosensory.com
• gEDA-user: Re: tested library of popular footprints.   john at ecosensory.com
• gEDA-user: Re: footprint bugs   john at ecosensory.com
• gEDA-user: newlib footprints ==>manageable list of dirs in the library window.   john at ecosensory.com
• gEDA-user: www.66each.com   john at ecosensory.com
• gEDA-user: new footprints added at gedasymbols.org   john at ecosensory.com
• gEDA-user: LED 100 != 5mm LED ?   kiu
• gEDA-user: LED 100 != 5mm LED ?   kiu
• gEDA-user: New gEDA Suite CD test release available   kiu
• gEDA-user: Re: dxf?   phil at plastitar.com
• gEDA-user: Polygons in footprints   phil at plastitar.com
• gEDA-user: Polygons in footprints   phil at plastitar.com
• gEDA-user: [pcb] embedding raster image size in png exports   phil at plastitar.com
• gEDA-user: DRC/rat quirks   phil at plastitar.com
• gEDA-user: Next step questions   phil at plastitar.com
• gEDA-user: Making gsch2pcb prefer files vs m4?   phil at plastitar.com
• gEDA-user: new boards!   phil at plastitar.com
• gEDA-user: VMPlayer Image   devrin talen

Last message date: Wed Feb 28 22:03:07 EDT 2007
Archived on: Wed Feb 28 22:03:10 EDT 2007

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...