April 2007 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Apr 1 00:07:49 EDT 2007
Ending: Mon Apr 30 23:24:03 EDT 2007
Messages: 570

• gEDA-user: Antenna Simulation   Stefan Dröge
• gEDA-user: Antenna Simulation   Stefan Dröge
• gEDA-user: Footprint preview in gschem or gattrib   Stefan Dröge
• gEDA-user: egnomical improvements for gschem from pcb   Stefan Dröge
• gEDA-user: attribute autoplacing   Carlos Nieves Ónega
• gEDA-user: Icarus Verilog PLI example: PLI_INT32 vs static int   Günter Dannoritzer
• gEDA-user: PCB testers needed   Stefan Dröge
• gEDA-user: Antenna Simulation   Stefan Dröge
• gEDA-user: PCBs using desktop inkjet   Stefan Dröge
• gEDA-user: PCBs using desktop inkjet   Stefan Dröge
• gEDA-user: What is a good name for a free/open source EDA group on USENET?   Stefan Dröge
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   Mike Jarabek
• gEDA-user: Design Lab Equipment   Mike Jarabek
• gEDA-user: photo-imagable supplies (was: dremel "drill press")   Mike Jarabek
• gEDA-user: photo-imagable supplies   Mike Jarabek
• gEDA-user: Antenna Simulation   Stefan Dröge
• Re: gEDA-user: OFF: OFWK2954 by Siemens   Wojciech Kazubski
• Re: gEDA-user: Antenna Simulation   Wojciech Kazubski
• gEDA-user: Re: Icarus Verilog PLI example: PLI_INT32 vs static int   Günter Dannoritzer
• gEDA-user: Design Lab Equipment   Felipe Balbi
• gEDA-user: Design Lab Equipment   Felipe Balbi
• gEDA-user: Problem Compiling geda/gaf   Felipe Balbi
• gEDA-user: Problem Compiling geda/gaf   Felipe Balbi
• gEDA-user: Problem Compiling geda/gaf   Felipe Balbi
• gEDA-user: Problem Compiling geda/gaf   Felipe Balbi
• gEDA-user: Problem Compiling geda/gaf   Felipe Balbi
• gEDA-user: Problem Compiling geda/gaf   Felipe Balbi
• gEDA-user: Problem Compiling geda/gaf   Felipe Balbi
• gEDA-user: gEDA vs commercial product   Alessandro Baretta
• gEDA-user: DJ's back   Peter Baxendale
• gEDA-user: VMWare image of Ubuntu distribution of Linux with gEDA installed.   Peter L. Berghold
• gEDA-user: TQFP Packages   Peter L. Berghold
• gEDA-user: TQFP Packages   Peter L. Berghold
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   Svenn Are Bjerkem
• gEDA-user: 74164.sym question   Svenn Are Bjerkem
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   Svenn Are Bjerkem
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   Svenn Are Bjerkem
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   Svenn Are Bjerkem
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   Svenn Are Bjerkem
• gEDA-user: Re: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   Svenn Are Bjerkem
• gEDA-user: DJ's back   Svenn Are Bjerkem
• gEDA-user: DJ's back   Svenn Are Bjerkem
• gEDA-user: DJ's back   Svenn Are Bjerkem
• gEDA-user: Antenna Simulation   Svenn Are Bjerkem
• gEDA-user: What is a good name for a free/open source EDA group on USENET?   Svenn Are Bjerkem
• gEDA-user: What is a good name for a free/open source EDA group on USENET?   Svenn Are Bjerkem
• gEDA-user: What is a good name for a free/open source EDA group on USENET?   Svenn Are Bjerkem
• gEDA-user: TwoStageAmp example   Stuart Brorson
• gEDA-user: TwoStageAmp example   Stuart Brorson
• gEDA-user: TwoStageAmp example   Stuart Brorson
• gEDA-user: TwoStageAmp example   Stuart Brorson
• gEDA-user: TwoStageAmp example   Stuart Brorson
• gEDA-user: TwoStageAmp example   Stuart Brorson
• gEDA-user: TwoStageAmp example   Stuart Brorson
• gEDA-user: TwoStageAmp example   Stuart Brorson
• gEDA-user: TwoStageAmp example   Stuart Brorson
• gEDA-user: TwoStageAmp example   Stuart Brorson
• gEDA-user: Reminder: gEDA code sprint is next Saturday (in one week)!   Stuart Brorson
• gEDA-user: refdes_renum changes, anybody?   Stuart Brorson
• gEDA-user: Re: refdes_renum changes, anybody?   Stuart Brorson
• gEDA-user: refdes_renum changes, anybody?   Stuart Brorson
• gEDA-user: refdes_renum changes, anybody?   Stuart Brorson
• Where's DJ? Was: Re: gEDA-user: home-made dremel "drill press"   Stuart Brorson
• gEDA-user: refdes and footprint not automatic from sym to sch   Stuart Brorson
• gEDA-user: refdes and footprint not automatic from sym to sch   Stuart Brorson
• gEDA-user: refdes and footprint not automatic from sym to sch   Stuart Brorson
• gEDA-user: New problem with spice-sdb   Stuart Brorson
• gEDA-user: New problem with spice-sdb   Stuart Brorson
• gEDA-user: GSCHEM FIND+SELECT RESISTORS AND ADD FOOTPRINT ATTRIBUTE TO GROUP   Stuart Brorson
• gEDA-user: INSTALLATION FROM ISO   Stuart Brorson
• gEDA-user: INSTALLATION FROM ISO   Stuart Brorson
• gEDA-user: gsymcheck   Stuart Brorson
• gEDA-user: README.debian for the iso image   Stuart Brorson
• gEDA-user: Free Dog this *Tuesday*, May 1st with Paolo Nenzi of NgSpice!   Stuart Brorson
• gEDA-user: spice-sdb and slotted parts.   Stuart Brorson
• gEDA-user: OT: DIY Pick and Place machines   Nelson Castillo
• gEDA-user: Re: Looking for a project   Peter Clifton
• gEDA-user: Multiple open pages in gschem   Peter Clifton
• gEDA-user: Multiple open pages in gschem   Peter Clifton
• gEDA-user: TwoStageAmp example   Peter Clifton
• gEDA-user: Multiple open pages in gschem   Peter Clifton
• gEDA-user: Multiple open pages in gschem   Peter Clifton
• gEDA-user: Multiple open pages in gschem   Peter Clifton
• gEDA-user: simulation advice   Peter Clifton
• gEDA-user: Page contents browser   Peter Clifton
• gEDA-user: Page contents browser   Peter Clifton
• gEDA-user: Hierarchical (nested) buses   Peter Clifton
• gEDA-user: Page contents browser   Peter Clifton
• gEDA-user: searching connected to "this object" (was:Page contents browser)   Peter Clifton
• gEDA-user: Multiple open pages in gschem   Peter Clifton
• gEDA-user: 74164.sym question   Peter Clifton
• gEDA-user: HowTo?   Peter Clifton
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   Peter Clifton
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   Peter Clifton
• gEDA-user: gEDA status window   Peter Clifton
• gEDA-user: How to locate a net on the schematic   Peter Clifton
• gEDA-user: How to locate a net on the schematic   Peter Clifton
• gEDA-user: sym object types?   Peter Clifton
• gEDA-user: Reminder: gEDA code sprint is next Saturday (in one week)!   Peter Clifton
• gEDA-user: PCBs using desktop inkjet   Peter Clifton
• gEDA-user: PCBs using desktop inkjet   Peter Clifton
• gEDA-user: Symbols/Footprints with internally connected pins   Peter Clifton
• gEDA-user: Some problems   Peter Clifton
• gEDA-user: Some problems   Peter Clifton
• gEDA-user: Some problems   Peter Clifton
• gEDA-user: PCB SYNTAX ERROR BROKEN PIPE   Peter Clifton
• gEDA-user: PCB SYNTAX ERROR BROKEN PIPE   Peter Clifton
• gEDA-user: PCB SYNTAX ERROR BROKEN PIPE   Peter Clifton
• gEDA-user: INSTALLATION FROM ISO   Peter Clifton
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   John Coppens
• gEDA-user: home-made dremel "drill press"   John Coppens
• gEDA-user: home-made dremel "drill press"   John Coppens
• gEDA-user: DJ's back   John Coppens
• gEDA-user: Antenna Simulation   John Coppens
• gEDA-user: Antenna Simulation   John Coppens
• gEDA-user: Antenna Simulation   John Coppens
• gEDA-user: Multiple open pages in gschem   Cory Cross
• gEDA-user: Multiple open pages in gschem   Cory Cross
• gEDA-user: VMWare image of Ubuntu distribution of Linux with gEDA installed.   Cory Cross
• gEDA-user: Looking for a project   Greg Cunningham
• gEDA-user: Looking for a project   Greg Cunningham
• gEDA-user: PCB: relative coords gtk<->lesstif inconsistencies   D.Ineiev
• gEDA-user: PCB: gtk HID usermenu branch merged   D.Ineiev
• gEDA-user: HowTo?   D.Ineiev
• gEDA-user: Design Flow Roadmap starting point   Magnus Danielson
• gEDA-user: Design Flow Roadmap starting point   Magnus Danielson
• gEDA-user: Design Flow Roadmap starting point   Magnus Danielson
• gEDA-user: Re: Looking for a project   DJ Delorie
• gEDA-user: pcb, net selection   DJ Delorie
• gEDA-user: update on furnace board   DJ Delorie
• gEDA-user: TwoStageAmp example   DJ Delorie
• gEDA-user: Quick and Easy solder mask creation   DJ Delorie
• gEDA-user: Quick and Easy solder mask creation   DJ Delorie
• gEDA-user: Quick and Easy solder mask creation   DJ Delorie
• gEDA-user: Quick and Easy solder mask creation   DJ Delorie
• gEDA-user: Quick and Easy solder mask creation   DJ Delorie
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   DJ Delorie
• gEDA-user: 4-bit_12-LED.png   DJ Delorie
• gEDA-user: Multiple open pages in gschem   DJ Delorie
• gEDA-user: Design Lab Equipment   DJ Delorie
• gEDA-user: Design Lab Equipment   DJ Delorie
• gEDA-user: PCB puller tool   DJ Delorie
• gEDA-user: Multiple open pages in gschem   DJ Delorie
• gEDA-user: simulation advice   DJ Delorie
• gEDA-user: PCB puller tool   DJ Delorie
• gEDA-user: simulation advice   DJ Delorie
• gEDA-user: simulation advice   DJ Delorie
• gEDA-user: Select all connected objects   DJ Delorie
• gEDA-user: HowTo?   DJ Delorie
• gEDA-user: HowTo?   DJ Delorie
• gEDA-user: pcb load error   DJ Delorie
• gEDA-user: pcb load error   DJ Delorie
• gEDA-user: HowTo?   DJ Delorie
• gEDA-user: pcb load error   DJ Delorie
• gEDA-user: selecting question   DJ Delorie
• gEDA-user: selecting question   DJ Delorie
• gEDA-user: 74164.sym question   DJ Delorie
• gEDA-user: 274x Gerber Files   DJ Delorie
• gEDA-user: 274x Gerber Files   DJ Delorie
• gEDA-user: dead copper removal   DJ Delorie
• gEDA-user: HowTo?   DJ Delorie
• gEDA-user: dead copper removal   DJ Delorie
• gEDA-user: dead copper removal   DJ Delorie
• gEDA-user: dead copper removal   DJ Delorie
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   DJ Delorie
• gEDA-user: 74164.sym question   DJ Delorie
• gEDA-user: HowTo?   DJ Delorie
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   DJ Delorie
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   DJ Delorie
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   DJ Delorie
• gEDA-user: pcb: incorrect postscript check plot on rounded pads   DJ Delorie
• gEDA-user: Gerber files   DJ Delorie
• gEDA-user: TQFP Packages   DJ Delorie
• gEDA-user: home-made dremel "drill press"   DJ Delorie
• gEDA-user: home-made dremel "drill press"   DJ Delorie
• gEDA-user: home-made dremel "drill press"   DJ Delorie
• gEDA-user: DJ's back   DJ Delorie
• gEDA-user: home-made dremel "drill press"   DJ Delorie
• gEDA-user: photo-imagable supplies (was: dremel "drill press")   DJ Delorie
• Where's DJ? Was: Re: gEDA-user: home-made dremel "drill press"   DJ Delorie
• gEDA-user: storm from the furnace's point of view   DJ Delorie
• gEDA-user: DJ's back   DJ Delorie
• gEDA-user: DJ's back   DJ Delorie
• gEDA-user: Antenna Simulation   DJ Delorie
• gEDA-user: PCBs using desktop inkjet   DJ Delorie
• gEDA-user: PCBs using desktop inkjet   DJ Delorie
• gEDA-user: non-circular arcs   DJ Delorie
• gEDA-user: Ripup   DJ Delorie
• gEDA-user: What is a good name for a free/open source EDA group on USENET?   DJ Delorie
• gEDA-user: Pcb Rectangle funnies   DJ Delorie
• gEDA-user: Pcb Rectangle funnies   DJ Delorie
• gEDA-user: TwoStageAmp example   John Doty
• gEDA-user: TwoStageAmp example   John Doty
• gEDA-user: Design Lab Equipment   John Doty
• gEDA-user: Design Lab Equipment   John Doty
• gEDA-user: TwoStageAmp example   John Doty
• gEDA-user: TwoStageAmp example   John Doty
• gEDA-user: How to locate a net on the schematic   John Doty
• gEDA-user: refdes_renum changes, anybody?   John Doty
• gEDA-user: DJ's back   John Doty
• gEDA-user: New problem with spice-sdb   John Doty
• gEDA-user: New problem with spice-sdb   John Doty
• gEDA-user: Phantom (hidden) elements on pcb   John Doty
• gEDA-user: TwoStageAmp example   Patrick Doyle
• gEDA-user: TwoStageAmp example   Patrick Doyle
• gEDA-user: TwoStageAmp example   Patrick Doyle
• gEDA-user: TwoStageAmp example   Patrick Doyle
• gEDA-user: TwoStageAmp example   Patrick Doyle
• gEDA-user: TwoStageAmp example   Patrick Doyle
• gEDA-user: TwoStageAmp example   Patrick Doyle
• gEDA-user: TwoStageAmp example   Patrick Doyle
• gEDA-user: TwoStageAmp example   Patrick Doyle
• gEDA-user: TwoStageAmp example   Patrick Doyle
• gEDA-user: TwoStageAmp example   Patrick Doyle
• gEDA-user: TwoStageAmp example   Patrick Doyle
• gEDA-user: TwoStageAmp example   Patrick Doyle
• gEDA-user: simulation advice   Patrick Doyle
• gEDA-user: TwoStageAmp example   Patrick Doyle
• gEDA-user: simulation advice   Patrick Doyle
• gEDA-user: TwoStageAmp example   Patrick Doyle
• gEDA-user: simulation advice   Patrick Doyle
• gEDA-user: simulation advice   Patrick Doyle
• gEDA-user: simulation advice   Patrick Doyle
• gEDA-user: simulation advice   Patrick Doyle
• gEDA-user: simulation advice   Patrick Doyle
• gEDA-user: simulation advice   Patrick Doyle
• gEDA-user: Gnucap crash   Patrick Doyle
• gEDA-user: Gnucap crash   Patrick Doyle
• gEDA-user: Gnucap crash   Patrick Doyle
• gEDA-user: Dead link in geda website   Patrick Doyle
• gEDA-user: Dead link in geda website   Patrick Doyle
• gEDA-user: dead copper removal   Harry Eaton
• gEDA-user: dead copper removal   Harry Eaton
• gEDA-user: dead copper removal   Harry Eaton
• gEDA-user: Pcb Rectangle funnies   Harry Eaton
• gEDA-user: Re: Pcb Rectangle funnies   Harry Eaton
• gEDA-user: Several PCB versions on 1 system   ST de Feber
• gEDA-user: Several PCB versions on 1 system   ST de Feber
• gEDA-user: Several PCB versions on 1 system   ST de Feber
• gEDA-user: Several PCB versions on 1 system   ST de Feber
• gEDA-user: Several PCB versions on 1 system   ST de Feber
• gEDA-user: Efficient Memories   Udi Finkelstein
• gEDA-user: TwoStageAmp example   Chitlesh GOORAH
• gEDA-user: TwoStageAmp example   Chitlesh GOORAH
• gEDA-user: TwoStageAmp example   Chitlesh GOORAH
• gEDA-user: TwoStageAmp example   Chitlesh GOORAH
• gEDA-user: TwoStageAmp example   Chitlesh GOORAH
• gEDA-user: Design Lab Equipment   Darryl Gibson
• gEDA-user: Looking for a project   Darryl Gibson
• gEDA-user: Reminder: gEDA code sprint is next Saturday (in one week)!   Darryl Gibson
• gEDA-user: home-made dremel "drill press"   Darryl Gibson
• gEDA-user: OT: DIY Pick and Place machines   John Griessen
• gEDA-user: Design Lab Equipment   John Griessen
• gEDA-user: Multiple open pages in gschem   John Griessen
• gEDA-user: Several PCB versions on 1 system   John Griessen
• gEDA-user: Several PCB versions on 1 system   John Griessen
• gEDA-user: Quick and Easy solder mask creation   John Griessen
• gEDA-user: Multiple open pages in gschem   John Griessen
• gEDA-user: popular licenses (free hardware)   John Griessen
• gEDA-user: VMWare image of Ubuntu distribution of Linux with gEDA installed.   John Griessen
• gEDA-user: avoid route on component layer for specific component   John Griessen
• gEDA-user: avoid route on component layer for specific component   John Griessen
• gEDA-user: VMWare image of Ubuntu distribution of Linux with gEDA installed.   John Griessen
• gEDA-user: searching connected to "this object" (was:Page contents browser)   John Griessen
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   John Griessen
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   John Griessen
• gEDA-user: refdes_renum changes, anybody?   John Griessen
• gEDA-user: home-made dremel "drill press"   John Griessen
• gEDA-user: home-made dremel "drill press"   John Griessen
• gEDA-user: photo-imagable supplies (was: dremel "drill press")   John Griessen
• gEDA-user: photo-imagable supplies   John Griessen
• gEDA-user: DJ's back   John Griessen
• gEDA-user: DJ's back   John Griessen
• gEDA-user: PCBs using desktop inkjet   John Griessen
• gEDA-user: PCBs using desktop inkjet   John Griessen
• gEDA-user: PCBs using desktop inkjet   John Griessen
• gEDA-user: PCBs using desktop inkjet   John Griessen
• gEDA-user: VMWare image of Ubuntu distribution of Linux with gEDA installed.   Darrell Harmon
• gEDA-user: photo-imagable supplies   Darrell Harmon
• gEDA-user: TwoStageAmp example   Werner Hoch
• gEDA-user: 74164.sym question   Werner Hoch
• gEDA-user: refdes and footprint not automatic from sym to sch   Werner Hoch
• gEDA-user: refdes and footprint not automatic from sym to sch   Werner Hoch
• gEDA-user: Design Flow Roadmap starting point   Ales Hvezda
• gEDA-user: Multiple open pages in gschem   Ales Hvezda
• gEDA-user: Multiple open pages in gschem   Ales Hvezda
• gEDA-user: Multiple open pages in gschem   Ales Hvezda
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   Ales Hvezda
• gEDA-user: sym object types?   Ales Hvezda
• gEDA-user: Dead link in geda website   Ales Hvezda
• gEDA-user: OT: theremin   Ales Hvezda
• gEDA-user: Problem Compiling geda/gaf   Ales Hvezda
• gEDA-user: Problem Compiling geda/gaf   Ales Hvezda
• gEDA-user: bug found in gsymcheck: device !=filename not flagged   Ales Hvezda
• gEDA-user: simulation advice   Samuel A. Falvo II
• gEDA-user: Re: Looking for a project   Igor2
• gEDA-user: VMWare image of Ubuntu distribution of Linux with gEDA installed.   Igor2
• gEDA-user: OT: DIY Pick and Place machines   Ben Jackson
• gEDA-user: avoid route on component layer for specific component   Ben Jackson
• gEDA-user: Select all connected objects   Ben Jackson
• gEDA-user: Re: Efficient Memories   Ben Jackson
• gEDA-user: home-made dremel "drill press"   Ben Jackson
• gEDA-user: Multiple open pages in gschem   Karl.
• gEDA-user: Design Lab Equipment   David Kerber
• gEDA-user: simulation advice   David Kerber
• gEDA-user: simulation advice   David Kerber
• gEDA-user: simulation advice   David Kerber
• gEDA-user: simulation advice   David Kerber
• gEDA-user: simulation advice   David Kerber
• gEDA-user: simulation advice   David Kerber
• gEDA-user: simulation advice   David Kerber
• gEDA-user: simulation advice   David Kerber
• gEDA-user: DJ's back   David Kerber
• gEDA-user: DJ's back   David Kerber
• gEDA-user: DJ's back   David Kerber
• gEDA-user: Re: Looking for a project   Kai-Martin Knaak
• gEDA-user: Re: Dead link in geda website   Kai-Martin Knaak
• gEDA-user: README.debian for the iso image   Kai-Martin Knaak
• gEDA-user: Re: README.debian for the iso image   Kai-Martin Knaak
• gEDA-user: OFF: OFWK2954 by Siemens   Levente
• gEDA-user: pcb, net selection   Levente
• gEDA-user: Re: OFF: OFWK2954 by Siemens   Levente
• gEDA-user: How to locate a net on the schematic   Levente
• gEDA-user: PCB lesstif segfault   Levente
• gEDA-user: Re: How to locate a net on the schematic   Levente
• gEDA-user: Re: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   Levente
• gEDA-user: Re: TQFP Packages   Levente
• gEDA-user: Re: refdes_renum changes, anybody?   Levente
• gEDA-user: Design Lab Equipment   John Luciani
• gEDA-user: Gerber files   John Luciani
• gEDA-user: sym object types?   John Luciani
• [Fwd: Re: gEDA-user: sym object types?]   John Luciani
• gEDA-user: TQFP Packages   John Luciani
• gEDA-user: Footprint Changes at luciani.org   John Luciani
• gEDA-user: refdes and footprint not automatic from sym to sch   John Luciani
• gEDA-user: refdes and footprint not automatic from sym to sch   John Luciani
• gEDA-user: buzzer sym?   John Luciani
• gEDA-user: Symbols/Footprints with internally connected pins   John Luciani
• gEDA-user: OT: theremin   John Luciani
• gEDA-user: OT: theremin   John Luciani
• gEDA-user: PCB SYNTAX ERROR BROKEN PIPE   John Luciani
• gEDA-user: PCB SYNTAX ERROR BROKEN PIPE   John Luciani
• gEDA-user: Design Lab Equipment   Dave McGuire
• gEDA-user: Multiple open pages in gschem   Dave McGuire
• gEDA-user: Design Lab Equipment   Dave McGuire
• gEDA-user: Multiple open pages in gschem   Dave McGuire
• gEDA-user: Design Lab Equipment   Dave McGuire
• gEDA-user: Multiple open pages in gschem   Dave McGuire
• gEDA-user: Multiple open pages in gschem   Dave McGuire
• gEDA-user: Multiple open pages in gschem   Dave McGuire
• gEDA-user: simulation advice   Dave McGuire
• gEDA-user: simulation advice   Dave McGuire
• gEDA-user: simulation advice   Dave McGuire
• gEDA-user: simulation advice   Dave McGuire
• gEDA-user: Re: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   Dave McGuire
• gEDA-user: Design Lab Equipment   Dan McMahill
• gEDA-user: Looking for a project   Dan McMahill
• gEDA-user: simulation advice   Dan McMahill
• gEDA-user: TwoStageAmp example   Dan McMahill
• gEDA-user: Update: Looking for a project   Dan McMahill
• gEDA-user: Select all connected objects   Dan McMahill
• gEDA-user: Select all connected objects   Dan McMahill
• gEDA-user: HowTo?   Dan McMahill
• gEDA-user: pcb load error   Dan McMahill
• gEDA-user: HowTo?   Dan McMahill
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   Dan McMahill
• gEDA-user: pcb make errors   Dan McMahill
• gEDA-user: Gerber files   Dan McMahill
• gEDA-user: make question   Dan McMahill
• gEDA-user: refdes_renum changes, anybody?   Dan McMahill
• gEDA-user: DJ's back   Dan McMahill
• gEDA-user: PCB testers needed   Dan McMahill
• gEDA-user: PCB testers needed   Dan McMahill
• gEDA-user: PCB: gtk HID usermenu branch merged   Dan McMahill
• gEDA-user: Problem Compiling geda/gaf   Dan McMahill
• gEDA-user: Some problems   Dan McMahill
• gEDA-user: PCB: gtk HID usermenu branch merged   Dan McMahill
• gEDA-user: Problem Compiling geda/gaf   Dan McMahill
• gEDA-user: Some problems   Dan McMahill
• gEDA-user: Problem Compiling geda/gaf   Dan McMahill
• gEDA-user: Problem Compiling geda/gaf   Dan McMahill
• gEDA-user: Some problems   Dan McMahill
• gEDA-user: PCB testers needed   Dan McMahill
• gEDA-user: Slots and tragesym   Steve Meier
• gEDA-user: DJ's back   Steve Meier
• gEDA-user: OT: theremin   Steve Meier
• gEDA-user: Re: Looking for a project   Steven Michalske
• gEDA-user: Re: Looking for a project   Steven Michalske
• gEDA-user: Design Lab Equipment   Steven Michalske
• gEDA-user: Quick and Easy solder mask creation   Steven Michalske
• gEDA-user: Quick and Easy solder mask creation   Steven Michalske
• gEDA-user: 4-bit_12-LED.png   Steven Michalske
• gEDA-user: Design Lab Equipment   Steven Michalske
• gEDA-user: PCB puller tool   Steven Michalske
• gEDA-user: Multiple open pages in gschem   Steven Michalske
• gEDA-user: PCB puller tool   Steven Michalske
• gEDA-user: Page contents browser   Steven Michalske
• gEDA-user: Slots and tragesym   Steven Michalske
• gEDA-user: Symbols/Footprints with internally connected pins   Steven Michalske
• gEDA-user: DJ's back   Marc Moreau
• gEDA-user: VMWare image of Ubuntu distribution of Linux with gEDA installed.   Steve Morss
• gEDA-user: Multiple open pages in gschem   Steve Morss
• gEDA-user: refdes_renum changes, anybody?   Steve Morss
• gEDA-user: Looking for a project   Ramakrishnan Muthukrishnan
• gEDA-user: Looking for a project   Ramakrishnan Muthukrishnan
• gEDA-user: Quick and Easy solder mask creation   Dave N6NZ
• gEDA-user: Quick and Easy solder mask creation   Dave N6NZ
• gEDA-user: Quick and Easy solder mask creation   Dave N6NZ
• gEDA-user: Quick and Easy solder mask creation   Dave N6NZ
• gEDA-user: Quick and Easy solder mask creation   Dave N6NZ
• gEDA-user: Quick and Easy solder mask creation   Dave N6NZ
• gEDA-user: pcb: incorrect postscript check plot on rounded pads   Dave N6NZ
• gEDA-user: pcb: incorrect postscript check plot on rounded pads   Dave N6NZ
• gEDA-user: Antenna Simulation   Dave N6NZ
• gEDA-user: PCBs using desktop inkjet   Dave N6NZ
• gEDA-user: Slots and tragesym   Craig Niederberger
• gEDA-user: Slots and tragesym   Craig Niederberger
• gEDA-user: Slots and tragesym   Craig Niederberger
• gEDA-user: Slots and tragesym   Craig Niederberger
• gEDA-user: pcb load error   Craig Niederberger
• gEDA-user: pcb load error   Craig Niederberger
• gEDA-user: pcb load error   Craig Niederberger
• gEDA-user: selecting question   Craig Niederberger
• gEDA-user: pcb load error   Craig Niederberger
• gEDA-user: selecting question   Craig Niederberger
• gEDA-user: selecting question   Craig Niederberger
• gEDA-user: pcb make errors   Craig Niederberger
• gEDA-user: Gerber files   Craig Niederberger
• gEDA-user: Gerber files   Craig Niederberger
• gEDA-user: Gerber files   Craig Niederberger
• gEDA-user: make question   Craig Niederberger
• gEDA-user: make question   Craig Niederberger
• gEDA-user: make question   Craig Niederberger
• gEDA-user: Re: Multiple open pages in gschem   KURT PETERS
• gEDA-user: Multiple open pages in gschem   KURT PETERS
• gEDA-user: refdes_renum changes, anybody?   KURT PETERS
• gEDA-user: Multiple open pages in gschem   Andy Peters
• gEDA-user: OT: theremin   Andy Peters
• gEDA-user: Page contents browser   Mark Rages
• gEDA-user: OLB information   Roberto Rodriguez
• gEDA-user: avoid route on component layer for specific component   ludovic SMADJA
• gEDA-user: Symbols/Footprints with internally connected pins   Stefan Salewski
• gEDA-user: Some problems   Stefan Salewski
• gEDA-user: Some problems   Stefan Salewski
• gEDA-user: Some problems   Stefan Salewski
• gEDA-user: Phantom (hidden) elements on pcb   Stefan Salewski
• gEDA-user: Design Lab Equipment   Ryan Seal
• gEDA-user: simulation advice   Ryan Seal
• gEDA-user: 274x Gerber Files   Ryan Seal
• gEDA-user: 274x Gerber Files   Ryan Seal
• gEDA-user: 274x Gerber Files   Ryan Seal
• gEDA-user: gEDA coordinate origin   Ryan Seal
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   Ryan Seal
• gEDA-user: PCB change - old install can't read new cvs?   Harold D. Skank
• gEDA-user: Multiple open pages in gschem   Harold D. Skank
• gEDA-user: HowTo?   Harold D. Skank
• gEDA-user: HowTo?   Harold D. Skank
• gEDA-user: HowTo?   Harold D. Skank
• gEDA-user: HowTo?   Harold D. Skank
• gEDA-user: Design Lab Equipment   Michael Sokolov
• gEDA-user: Design Lab Equipment   Michael Sokolov
• gEDA-user: simulation advice   Michael Sokolov
• gEDA-user: Looking for a project   Tomaz Solc
• gEDA-user: home-made dremel "drill press"   Tomaz Solc
• gEDA-user: PCBs using desktop inkjet   Tomaz Solc
• gEDA-user: PCBs using desktop inkjet   C P Tarun
• gEDA-user: TwoStageAmp example   L.J.H. Timmerman
• gEDA-user: TwoStageAmp example   L.J.H. Timmerman
• gEDA-user: refdes and footprint not automatic from sym to sch   Transistor Toaster
• gEDA-user: Dead link in geda website   Transistor Toaster
• gEDA-user: refdes and footprint not automatic from sym to sch   Transistor Toaster
• gEDA-user: Dead link in geda website   Transistor Toaster
• gEDA-user: refdes and footprint not automatic from sym to sch   Transistor Toaster
• gEDA-user: refdes and footprint not automatic from sym to sch   Transistor Toaster
• gEDA-user: refdes and footprint not automatic from sym to sch   Transistor Toaster
• gEDA-user: refdes and footprint not automatic from sym to sch   Transistor Toaster
• gEDA-user: refdes and footprint not automatic from sym to sch   Transistor Toaster
• gEDA-user: GSCHEM FIND+SELECT RESISTORS AND ADD FOOTPRINT ATTRIBUTE TO GROUP   Transistor Toaster
• gEDA-user: PCB SYNTAX ERROR BROKEN PIPE   Transistor Toaster
• gEDA-user: PCB SYNTAX ERROR BROKEN PIPE   Transistor Toaster
• gEDA-user: PCB SYNTAX ERROR BROKEN PIPE   Transistor Toaster
• gEDA-user: PCB SYNTAX ERROR BROKEN PIPE   Transistor Toaster
• gEDA-user: INSTALLATION FROM ISO   Transistor Toaster
• gEDA-user: INSTALLATION FROM ISO   Transistor Toaster
• gEDA-user: INSTALLATION FROM ISO   Transistor Toaster
• gEDA-user: bug found in gsymcheck: device !=filename not flagged   Transistor Toaster
• gEDA-user: gsch2pcb can't find footprint value=unknown   Transistor Toaster
• gEDA-user: VMPlayer Image   Jeff VR
• gEDA-user: Hierarchy issue with gsch2pcb   anne Vanhoest
• gEDA-user: Re: Icarus Verilog PLI example: PLI_INT32 vs static int   Stephen Williams
• gEDA-user: Re: Icarus Verilog PLI example: PLI_INT32 vs static int   Stephen Williams
• gEDA-user: Re: Efficient Memories   Stephen Williams
• gEDA-user: Re: Efficient Memories   Stephen Williams
• gEDA-user: Re: iverilog: Preprocessing requires \n   Stephen Williams
• gEDA-user: Re: BUGS: iverilog reals   Stephen Williams
• gEDA-user: Re: Reeling over Reals   Stephen Williams
• gEDA-user: Re: iverilog: Parameters of Parameters   Stephen Williams
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: simulation advice   al davis
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: Looking for a project   al davis
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: Looking for a project   al davis
• gEDA-user: simulation advice   al davis
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: Design Lab Equipment   al davis
• gEDA-user: simulation advice   al davis
• gEDA-user: Design Lab Equipment   al davis
• gEDA-user: simulation advice   al davis
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: simulation advice   al davis
• gEDA-user: simulation advice   al davis
• gEDA-user: simulation advice   al davis
• gEDA-user: Design Flow Roadmap starting point   al davis
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: Design Flow Roadmap starting point   al davis
• gEDA-user: simulation advice   al davis
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: Gnucap crash   al davis
• gEDA-user: Gnucap crash   al davis
• gEDA-user: TwoStageAmp example   al davis
• gEDA-user: Gnucap crash   al davis
• gEDA-user: Gnucap crash   al davis
• gEDA-user: Gnucap crash   al davis
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   william estrada
• gEDA-user: 4-bit_12-LED.png   william estrada
• gEDA-user: 74164.sym question   william estrada
• gEDA-user: Re: 74164.sym question   william estrada
• gEDA-user: gEDA status window   william estrada
• gEDA-user: sym object types?   william estrada
• gEDA-user: sym object types?   william estrada
• [Fwd: Re: gEDA-user: sym object types?]   william estrada
• [Fwd: Re: gEDA-user: sym object types?]   william estrada
• gEDA-user: CNC ROUTER PLANS   william estrada
• gEDA-user: buzzer sym?   william estrada
• gEDA-user: gsymcheck   william estrada
• gEDA-user: Multiple open pages in gschem   evan foss
• gEDA-user: Multiple open pages in gschem   evan foss
• gEDA-user: Multiple open pages in gschem   evan foss
• gEDA-user: Page contents browser   evan foss
• gEDA-user: Page contents browser   evan foss
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   evan foss
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   evan foss
• gEDA-user: simulation advice   ldoolitt at recycle.lbl.gov
• gEDA-user: simulation advice   ldoolitt at recycle.lbl.gov
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   ldoolitt at recycle.lbl.gov
• gEDA-user: 4-bit_12-LED.png (PNG Image, 1024x768 pixels)   ldoolitt at recycle.lbl.gov
• gEDA-user: Efficient Memories   lingwitt at bellsouth.net
• gEDA-user: Re: Efficient Memories   lingwitt at bellsouth.net
• gEDA-user: Re: Efficient Memories   lingwitt at bellsouth.net
• gEDA-user: Possible Bug   lingwitt at bellsouth.net
• gEDA-user: BUGS: iverilog reals   lingwitt at bellsouth.net
• gEDA-user: iverilog: Preprocessing requires \n   lingwitt at bellsouth.net
• gEDA-user: Reeling over Reals   lingwitt at bellsouth.net
• gEDA-user: iverilog: Parameters of Parameters   lingwitt at bellsouth.net
• gEDA-user: back online after months :)   marc price
• gEDA-user: Pcb Rectangle funnies   rge at hsp-law.de
• gEDA-user: Re: Pcb Rectangle funnies   rge at hsp-law.de
• gEDA-user: Re: Pcb Rectangle funnies   rge at hsp-law.de
• gEDA-user: The Suite ISO CD in Debian 4   somethin2cool
• gEDA-user: Ripup   user1 at mnet-online.de

Last message date: Mon Apr 30 23:24:03 EDT 2007
Archived on: Thu May 3 06:16:30 EDT 2007

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...