October 2006 Archives by thread

Messages sorted by: [ subject ] [ author ] [ date ]
More info on this list...

Starting: Sun Oct 1 03:51:57 EDT 2006
Ending: Tue Oct 31 23:25:25 EST 2006
Messages: 391

gEDA-user: Suse-10.1 Wolfgang Buesser
- gEDA-user: Suse-10.1 kmk
gEDA-user: "Disabling" symbols and nets? Tomasz Nowak
- gEDA-user: "Disabling" symbols and nets? Peter Clifton
gEDA-user: conversion tools for geda Peter Clifton
- gEDA-user: conversion tools for geda Ales Hvezda
gEDA-user: Design changs required to mill PCBs? Bob Paddock
- gEDA-user: Design changs required to mill PCBs? Dan McMahill
  - gEDA-user: Design changs required to mill PCBs? Bob Paddock
    - gEDA-user: Design changs required to mill PCBs? Dave McGuire
    - gEDA-user: Design changs required to mill PCBs? Igor2
    - gEDA-user: Design changs required to mill PCBs? Robert Fitzsimons
    - gEDA-user: Design changs required to mill PCBs? Dave McGuire
    - gEDA-user: Design changs required to mill PCBs? Dave N6NZ
    - gEDA-user: Design changs required to mill PCBs? Dan McMahill
    - gEDA-user: Design changs required to mill PCBs? DJ Delorie
    - gEDA-user: Design changs required to mill PCBs? Dave N6NZ
    - gEDA-user: Design changs required to mill PCBs? Igor2
    - gEDA-user: Design changs required to mill PCBs? Dave N6NZ
    - gEDA-user: Design changs required to mill PCBs? Dave McGuire
gEDA-user: Yesterday's code sprint irc log posted Ales Hvezda
- gEDA-user: Re: gEDA-dev: Yesterday's code sprint irc log posted Jean-Francois Blavier
gEDA-user: [pcb] settings file DJ Delorie
- gEDA-user: PCB: Rotate in steps of 30 and 45 degree? David Epping
  - gEDA-user: PCB: Rotate in steps of 30 and 45 degree? DJ Delorie
    - gEDA-user: PCB: Rotate in steps of 30 and 45 degree? Dave N6NZ
    - gEDA-user: PCB: Rotate in steps of 30 and 45 degree? DJ Delorie
    - gEDA-user: PCB: Rotate in steps of 30 and 45 degree? Xtian Xultz
    - gEDA-user: PCB: Rotate in steps of 30 and 45 degree? John Griessen
    - gEDA-user: PCB: Rotate in steps of 30 and 45 degree? DJ Delorie
    - gEDA-user: PCB: Rotate in steps of 30 and 45 degree? Florian Steiper
    - gEDA-user: PCB: Rotate in steps of 30 and 45 degree? DJ Delorie
    - gEDA-user: PCB: Rotate in steps of 30 and 45 degree? Dan McMahill
    - gEDA-user: PCB: Rotate in steps of 30 and 45 degree? Dan McMahill
gEDA-user: Newbie PCB DRC questions Vaughn Treude
- gEDA-user: Newbie PCB DRC questions Peter Baxendale
  - gEDA-user: Newbie PCB DRC questions joeft
    - gEDA-user: Newbie PCB DRC questions John Griessen
    - gEDA-user: Newbie PCB DRC questions Dave McGuire
    - gEDA-user: Newbie PCB DRC questions Peter Baxendale
- gEDA-user: Newbie PCB DRC questions Harry Eaton
- gEDA-user: Re: Newbie PCB DRC questions Vaughn Treude
gEDA-user: Re: Design changs required to mill PCBs? Matthew Sager
- gEDA-user: Re: Design changs required to mill PCBs? DJ Delorie
  - gEDA-user: Re: Design changs required to mill PCBs? Bob Paddock
    - gEDA-user: Re: Design changs required to mill PCBs? DJ Delorie
    - gEDA-user: Re: Design changs required to mill PCBs? John Griessen
    - gEDA-user: Re: Design changs required to mill PCBs? DJ Delorie
    - gEDA-user: Re: Design changs required to mill PCBs? David Carr
    - gEDA-user: Re: Design changs required to mill PCBs? DJ Delorie
gEDA-user: home-made 4 layer board idea DJ Delorie
- gEDA-user: home-made 4 layer board idea Harry Eaton
  - gEDA-user: home-made 4 layer board idea DJ Delorie
    - gEDA-user: home-made 4 layer board idea gene glick
    - gEDA-user: home-made 4 layer board idea DJ Delorie
    - gEDA-user: home-made 4 layer board idea gene glick
    - gEDA-user: home-made 4 layer board idea DJ Delorie
    - gEDA-user: home-made 4 layer board idea Harry Eaton
    - gEDA-user: home-made 4 layer board idea DJ Delorie
- gEDA-user: home-made 4 layer board idea John Griessen
  - gEDA-user: home-made 4 layer board idea DJ Delorie
gEDA-user: Icarus Verilog Release 0.8.3 Stephen Williams
- gEDA-user: Icarus Verilog Release 0.8.3 Dan McMahill
gEDA-user: Re: gEDA-dev: Filechooser and component selector code John Griessen
- gEDA-user: simulating microcontroller Ejaz Ahmed
gEDA-user: Problems with PCB grid Harold D. Skank
- gEDA-user: Problems with PCB grid Harold D. Skank
  - gEDA-user: Problems with PCB grid joeft
gEDA-user: Better way to set sizes (line width, via diameter, drill diameter, etc) in pcb? Marc Mignard
- gEDA-user: Better way to set sizes (line width, via diameter, drill diameter, etc) in pcb? John Griessen
  - gEDA-user: Better way to set sizes (line width, via diameter, drill diameter, etc) in pcb? Stuart Brorson
- gEDA-user: Better way to set sizes (line width, via diameter, drill diameter, etc) in pcb? DJ Delorie
  - gEDA-user: [pcb-gpmi] scriptable exporter Igor2
gEDA-user: question about pcb libraries lesstif HID John Griessen
- gEDA-user: question about pcb libraries lesstif HID DJ Delorie
gEDA-user: Board fabrication -- outline Stefan Salewski
- gEDA-user: Board fabrication -- outline John Luciani
  - gEDA-user: Board fabrication -- outline Xtian Xultz
- gEDA-user: Re: Board fabrication -- outline Kai-Martin Knaak
  - gEDA-user: Re: Board fabrication -- outline Stefan Salewski
    - gEDA-user: Re: Board fabrication -- outline Peter Clifton
    - gEDA-user: Re: Board fabrication -- outline DJ Delorie
- gEDA-user: Board fabrication -- outline DJ Delorie
- gEDA-user: Board fabrication -- outline phil at plastitar.com
gEDA-user: New polygon handling version now in head of CVS version bumpelo at comcast.net
gEDA-user: Re: Board fabrication -- outline bumpelo at comcast.net
- gEDA-user: Re: Board fabrication -- outline Peter Baxendale
gEDA-user: bf1 vs. pcb Levente
- gEDA-user: bf1 vs. pcb DJ Delorie
- gEDA-user: bf1 vs. pcb Harry Eaton
  - gEDA-user: Re: bf1 vs. pcb Levente
    - gEDA-user: Re: bf1 vs. pcb Harry Eaton
    - gEDA-user: Re: bf1 vs. pcb Levente
    - gEDA-user: Re: bf1 vs. pcb David Carr
  - gEDA-user: bf1 vs. pcb Peter Clifton
    - gEDA-user: bf1 vs. pcb Dan McMahill
    - gEDA-user: bf1 vs. pcb Harry Eaton
    - gEDA-user: bf1 vs. pcb Peter Clifton
    - gEDA-user: bf1 vs. pcb John Griessen
gEDA-user: IPC 7351 name for wire terminal? phil at plastitar.com
- gEDA-user: IPC 7351 name for wire terminal? John Luciani
  - gEDA-user: IPC 7351 name for wire terminal? phil at plastitar.com
    - gEDA-user: IPC 7351 name for wire terminal? John Luciani
gEDA-user: Segfault with ubuntu packages Matt Ettus
- gEDA-user: Segfault with ubuntu packages Peter Clifton
gEDA-user: PCB lesstif pcb-menu.res ideas John Griessen
- gEDA-user: PCB lesstif pcb-menu.res ideas DJ Delorie
  - gEDA-user: PCB lesstif pcb-menu.res ideas John Griessen
    - gEDA-user: PCB lesstif pcb-menu.res ideas DJ Delorie
    - gEDA-user: PCB lesstif pcb-menu.res ideas John Griessen
    - gEDA-user: PCB lesstif pcb-menu.res ideas DJ Delorie
    - gEDA-user: PCB lesstif pcb-menu.res ideas joeft
    - gEDA-user: PCB lesstif pcb-menu.res ideas DJ Delorie
gEDA-user: the challenge boards are here! DJ Delorie
gEDA-user: PCB lesstif pcb-menu.res ideas bumpelo at comcast.net
gEDA-user: TO-263 footprint Jeff VR
- gEDA-user: TO-263 footprint John Luciani
gEDA-user: Polygon clear line question hwb
- gEDA-user: Polygon clear line question DJ Delorie
  - gEDA-user: Polygon clear line question hwb
    - gEDA-user: Polygon clear line question DJ Delorie
gEDA-user: more on clipping Levente
- gEDA-user: Re: more on clipping Kai-Martin Knaak
- gEDA-user: more on clipping Harry Eaton
  - gEDA-user: more on clipping David Carr
    - gEDA-user: more on clipping Harry Eaton
  - gEDA-user: Re: more on clipping Levente
    - gEDA-user: Re: more on clipping Harry Eaton
    - gEDA-user: Re: more on clipping Levente
gEDA-user: Hurray for pcb-clipping David Carr
gEDA-user: PCB: See 'Problems' in the manual Karel Kulhavy
- gEDA-user: PCB: See 'Problems' in the manual DJ Delorie
- gEDA-user: PCB: See 'Problems' in the manual phil at advancedarchitecture.org
gEDA-user: PCB: Save called Open Karel Kulhavy
- gEDA-user: PCB: Save called Open DJ Delorie
  - gEDA-user: PCB: Save called Open Karel Kulhavy
gEDA-user: Automatic repositioning to attributes Antonio Augusto Todo Bom Neto
- gEDA-user: Automatic repositioning to attributes Antonio Augusto Todo Bom Neto
- gEDA-user: Automatic repositioning to attributes Carlos Nieves Ónega
  - gEDA-user: Automatic repositioning to attributes Antonio Augusto Todo Bom Neto
    - gEDA-user: Automatic repositioning to attributes Carlos Nieves Ónega
    - gEDA-user: Automatic repositioning to attributes John Griessen
    - gEDA-user: Automatic repositioning to attributes Carlos Nieves Ónega
    - gEDA-user: Automatic repositioning to attributes Antonio Augusto Todo Bom Neto
    - gEDA-user: Automatic repositioning to attributes Antonio Augusto Todo Bom Neto
gEDA-user: TQFP Footprints Lares Moreau
- gEDA-user: TQFP Footprints Dan McMahill
- gEDA-user: TQFP Footprints John Luciani
gEDA-user: Got some gEDA symbols Michael Sokolov
- gEDA-user: Got some gEDA symbols DJ Delorie
gEDA-user: Got some gEDA symbols Michael Sokolov
- gEDA-user: Got some gEDA symbols DJ Delorie
gEDA-user: one net, two pins Dave N6NZ
- gEDA-user: one net, two pins phil at advancedarchitecture.org
  - gEDA-user: one net, two pins Dave N6NZ
    - gEDA-user: one net, two pins John Griessen
    - gEDA-user: one net, two pins Dave N6NZ
  - gEDA-user: one net, two pins John Griessen
gEDA-user: QFN16_3_EP footprint Matthias Wenzel
- gEDA-user: QFN16_3_EP footprint Dan McMahill
  - gEDA-user: QFN16_3_EP footprint Matthias Wenzel
    - gEDA-user: QFN16_3_EP footprint Matthias Wenzel
    - gEDA-user: QFN16_3_EP footprint Dan McMahill
gEDA-user: Got some gEDA symbols Michael Sokolov
- gEDA-user: Got some gEDA symbols DJ Delorie
gEDA-user: Some gschem/ngspice problems John Coppens
- gEDA-user: Some gschem/ngspice problems al davis
- gEDA-user: Some gschem/ngspice problems Ales Hvezda
gEDA-user: Dangerous gsymupdate behavior Matt Ettus
- gEDA-user: Dangerous gsymupdate behavior Dan McMahill
gEDA-user: Schottky diode? John Coppens
- gEDA-user: Schottky diode? al davis
  - gEDA-user: Schottky diode? Karel Kulhavy
    - gEDA-user: Schottky diode? al davis
  - gEDA-user: Schottky diode? John Coppens
  - gEDA-user: Schottky diode? John Coppens
    - gEDA-user: Schottky diode? al davis
    - gEDA-user: Schottky diode? John Coppens
    - gEDA-user: Schottky diode? Dan McMahill
    - gEDA-user: Schottky diode? John Coppens
    - gEDA-user: Schottky diode? Dan McMahill
    - gEDA-user: Schottky diode? John Coppens
    - gEDA-user: Schottky diode? Dan McMahill
    - gEDA-user: Schottky diode? Dave McGuire
    - gEDA-user: Schottky diode? John Luciani
    - gEDA-user: Schottky diode? John Coppens
    - gEDA-user: Schottky diode? al davis
    - gEDA-user: Schottky diode? John Griessen
    - gEDA-user: Schottky diode? Dan McMahill
    - gEDA-user: Schottky diode? Dave McGuire
    - gEDA-user: Schottky diode? John Coppens
    - gEDA-user: Schottky diode? al davis
    - gEDA-user: Schottky diode? Dan McMahill
gEDA-user: Buses in gEDA/gaf Michael Sokolov
- gEDA-user: Buses in gEDA/gaf DJ Delorie
gEDA-user: Buses in gEDA/gaf Michael Sokolov
- gEDA-user: Buses in gEDA/gaf DJ Delorie
  - gEDA-user: Buses in gEDA/gaf Ales Hvezda
- gEDA-user: Buses in gEDA/gaf Martin Habets
gEDA-user: PCB: turn off refdes in silk for selected components? Dave N6NZ
- gEDA-user: PCB: turn off refdes in silk for selected components? Peter Clifton
  - gEDA-user: PCB: turn off refdes in silk for selected components? Dave N6NZ
gEDA-user: Re: gEDA-dev: gsch2pcb is not finding local footprint dirs John Griessen
- gEDA-user: Re: gEDA-dev: gsch2pcb is not finding local footprint dirs phil at plastitar.com
  - gEDA-user: gsch2pcb project file syntax John Griessen
    - gEDA-user: gsch2pcb project file syntax phil at plastitar.com
gEDA-user: Icarus Verilog documentation Wiki Stephen Williams
- gEDA-user: Icarus Verilog documentation Wiki Samuel A. Falvo II
gEDA-user: smd challenge board status - last step! DJ Delorie
- gEDA-user: smd challenge board status - last step! Dan McMahill
  - gEDA-user: smd challenge board status - last step! DJ Delorie
    - gEDA-user: smd challenge board status - last step! Dan McMahill
    - gEDA-user: smd challenge board status - last step! DJ Delorie
    - gEDA-user: smd challenge board status - last step! Dave McGuire
    - gEDA-user: smd challenge board status - last step! John Griessen
- gEDA-user: smd challenge board status - last step! Lares Moreau
  - gEDA-user: smd challenge board status - last step! DJ Delorie
    - gEDA-user: smd challenge board status - last step! Bob Paddock
    - gEDA-user: smd challenge board status - last step! DJ Delorie
    - gEDA-user: smd challenge board status - last step! John Griessen
    - gEDA-user: smd challenge board status - last step! DJ Delorie
    - gEDA-user: smd challenge board status - last step! DJ Delorie
    - gEDA-user: smd challenge board status - last step! Dave McGuire
    - gEDA-user: smd challenge board status - last step! DJ Delorie
    - gEDA-user: smd challenge board status - last step! Dave McGuire
    - gEDA-user: smd challenge board status - last step! DJ Delorie
gEDA-user: PCB polygon & rectangle practicalities Dave N6NZ
- gEDA-user: PCB polygon & rectangle practicalities Harry Eaton
  - gEDA-user: PCB polygon & rectangle practicalities Harry Eaton
gEDA-user: Trouble with CONN_USB Olof Tångrot
- gEDA-user: Trouble with CONN_USB John Luciani
  - gEDA-user: Trouble with CONN_USB Olof Tångrot
    - gEDA-user: Trouble with CONN_USB phil at plastitar.com
    - gEDA-user: Trouble with CONN_USB Olof Tångrot
gEDA-user: How To Unsubscribe? User Tomdean
- gEDA-user: How To Unsubscribe? Evan Lavelle
  - gEDA-user: How To Unsubscribe? Ales Hvezda
    - gEDA-user: How To Unsubscribe? Evan Lavelle
gEDA-user: bending design rules for TSSOP20 -- need advice Dave N6NZ
- gEDA-user: bending design rules for TSSOP20 -- need advice Dave N6NZ
  - gEDA-user: bending design rules for TSSOP20 -- need advice Steve Meier
    - gEDA-user: bending design rules for TSSOP20 -- need advice Dave N6NZ
- gEDA-user: bending design rules for TSSOP20 -- need advice DJ Delorie
  - gEDA-user: bending design rules for TSSOP20 -- need advice Dave N6NZ
- gEDA-user: bending design rules for TSSOP20 -- need advice Steve Meier
gEDA-user: Time or order your SMD Challenge Board! DJ Delorie
- gEDA-user: Time or order your SMD Challenge Board! Karel Kulhavy
  - gEDA-user: Time or order your SMD Challenge Board! DJ Delorie
- gEDA-user: Time or order your SMD Challenge Board! Samuel A. Falvo II
gEDA-user: gEDA/gaf 20061020 source tarballs released Ales Hvezda
- gEDA-user: gEDA/gaf 20061020 source tarballs released Dave N6NZ
  - gEDA-user: gEDA/gaf 20061020 source tarballs released Ales Hvezda
gEDA-user: Combining 2 schematics in a single pcb project Carl Franks
gEDA-user: fried my LDO :-( DJ Delorie
- gEDA-user: fried my LDO :-( John Griessen
  - gEDA-user: fried my LDO :-( Ales Hvezda
- gEDA-user: fried my LDO :-( phil at plastitar.com
  - gEDA-user: fried my LDO :-( DJ Delorie
    - gEDA-user: fried my LDO :-( Steve Meier
    - gEDA-user: fried my LDO :-( DJ Delorie
    - gEDA-user: fried my LDO :-( Steve Meier
    - gEDA-user: fried my LDO :-( DJ Delorie
    - gEDA-user: fried my LDO :-( Steve Meier
    - gEDA-user: fried my LDO :-( DJ Delorie
- gEDA-user: Test Stuart Brorson
  - gEDA-user: Test Steve Meier
gEDA-user: gschem symbol search order Peter Baxendale
- gEDA-user: gschem symbol search order Ales Hvezda
gEDA-user: gsch2pcb can't find pcb installation directory devrin talen
- gEDA-user: gsch2pcb can't find pcb installation directory John Griessen
  - gEDA-user: gsch2pcb can't find pcb installation directory devrin talen
    - gEDA-user: gsch2pcb can't find pcb installation directory John Griessen
    - gEDA-user: gsch2pcb can't find pcb installation directory John Luciani
    - gEDA-user: gsch2pcb can't find pcb installation directory devrin talen
gEDA-user: smd challenge board status DJ Delorie
- gEDA-user: smd challenge board status Mark Rages
  - gEDA-user: smd challenge board status Steve Meier
    - gEDA-user: smd challenge board status Steve Meier
  - gEDA-user: smd challenge board status Bob Paddock
    - gEDA-user: smd challenge board status Steve Meier
  - gEDA-user: smd challenge board status John Griessen
gEDA-user: m3a-4m board assembled DJ Delorie
- gEDA-user: m3a-4m board assembled John Griessen
  - gEDA-user: m3a-4m board assembled DJ Delorie
gEDA-user: gnucap include command Karel Kulhavy
gEDA-user: gnucap: how to use .MODEL? Karel Kulhavy
- gEDA-user: gnucap: how to use .MODEL? al davis
  - gEDA-user: gnucap: how to use .MODEL? al davis
    - gEDA-user: gnucap: how to use .MODEL? John Doty
    - gEDA-user: gnucap: how to use .MODEL? Karel Kulhavy
    - gEDA-user: gnucap: how to use .MODEL? al davis
gEDA-user: PCB footprints John Griessen
- gEDA-user: PCB footprints DJ Delorie
gEDA-user: net attribute placement Kai-Martin Knaak
- gEDA-user: net attribute placement Carlos Nieves Ónega
  - gEDA-user: Re: net attribute placement Kai-Martin Knaak
gEDA-user: segfault on edit of slot attribute Kai-Martin Knaak
gEDA-user: Orcad binary file format Patrick Doyle
- gEDA-user: Orcad binary file format Patrick Doyle
- gEDA-user: Orcad binary file format Dan McMahill
gEDA-user: pin numbers don't update on slot edit Kai-Martin Knaak
- gEDA-user: pin numbers don't update on slot edit Ales Hvezda
gEDA-user: My board is back -- groundplane (polygon) is missing Stefan Salewski
- gEDA-user: My board is back -- groundplane (polygon) is missing Harry Eaton
gEDA-user: PCB and new thermals syntax error Christian Treldal
- gEDA-user: PCB and new thermals syntax error DJ Delorie
  - gEDA-user: PCB and new thermals syntax error Christian Treldal
    - gEDA-user: PCB and new thermals syntax error Harry Eaton
    - gEDA-user: PCB and new thermals syntax error Christian Treldal
gEDA-user: Current source rail blocking Karel Kulhavy
- gEDA-user: Current source rail blocking DJ Delorie
- gEDA-user: Current source rail blocking John Griessen
- gEDA-user: Current source rail blocking Dan McMahill
  - gEDA-user: Current source rail blocking Karel Kulhavy
    - gEDA-user: Current source rail blocking Dan McMahill
    - gEDA-user: Current source rail blocking Karel Kulhavy
    - gEDA-user: Current source rail blocking John Griessen
    - gEDA-user: Funny problem in PCB Xtian Xultz
gEDA-user: Footprints, pins with 0x09 type Stefan Salewski
- gEDA-user: Footprints, pins with 0x09 type DJ Delorie
- gEDA-user: Footprints, pins with 0x09 type John Luciani
gEDA-user: solder bridges in gschem and pcb Stefan Salewski
- gEDA-user: solder bridges in gschem and pcb Bob Paddock
- gEDA-user: solder bridges in gschem and pcb DJ Delorie
  - gEDA-user: solder bridges in gschem and pcb John Luciani
    - gEDA-user: solder bridges in gschem and pcb DJ Delorie
gEDA-user: BC547 vs. 2N3904 Karel Kulhavy
- gEDA-user: BC547 vs. 2N3904 Stefan Salewski
- gEDA-user: BC547 vs. 2N3904 Wojciech Kazubski
  - gEDA-user: BC547 vs. 2N3904 Karel Kulhavy
    - gEDA-user: BC547 vs. 2N3904 Wojciech Kazubski
gEDA-user: Haunted BF982 Karel Kulhavy
- gEDA-user: Haunted BF982 Dan McMahill
  - gEDA-user: Haunted BF982 Karel Kulhavy
    - gEDA-user: Haunted BF982 Samuel A. Falvo II
gEDA-user: pcb refdes name restrictions? Peter Baxendale
- gEDA-user: pcb refdes name restrictions? Peter Clifton
  - gEDA-user: pcb refdes name restrictions? Peter Baxendale
- gEDA-user: pcb refdes name restrictions? John Luciani
  - gEDA-user: pcb refdes name restrictions? Peter Baxendale
    - gEDA-user: pcb refdes name restrictions? Stuart Brorson
    - gEDA-user: pcb refdes name restrictions? Peter Baxendale
    - gEDA-user: pcb refdes name restrictions? Peter Clifton
    - gEDA-user: pcb refdes name restrictions? Peter Baxendale
    - gEDA-user: pcb refdes name restrictions? Peter Clifton
    - gEDA-user: pcb refdes name restrictions? John Luciani
    - gEDA-user: experiences using geda with students John Griessen
    - gEDA-user: Forwarding some gEDA teaching materials I've discovered: Peter Clifton
    - gEDA-user: Forwarding some gEDA teaching materials I've discovered: Peter Clifton
    - gEDA-user: pcb refdes name restrictions? Dan McMahill
    - gEDA-user: pcb refdes name restrictions? Harry Eaton
    - gEDA-user: pcb refdes name restrictions? Dan McMahill
    - gEDA-user: pcb refdes name restrictions? Dan McMahill
gEDA-user: gPCB Polygon Best Practices Jeff VR
- gEDA-user: gPCB Polygon Best Practices DJ Delorie
  - gEDA-user: gPCB Polygon Best Practices Xtian Xultz
    - gEDA-user: gPCB Polygon Best Practices DJ Delorie
  - gEDA-user: gPCB Polygon Best Practices Jeff VR
    - gEDA-user: gPCB Polygon Best Practices DJ Delorie
    - gEDA-user: gPCB Polygon Best Practices Jeff VR
    - gEDA-user: gPCB Polygon Best Practices DJ Delorie
    - gEDA-user: gPCB Polygon Best Practices Harry Eaton
- gEDA-user: gPCB Polygon Best Practices Xtian Xultz
gEDA-user: Pointer to 3d CAD? Dave N6NZ
- gEDA-user: Re: Pointer to 3d CAD? Kai-Martin Knaak
- gEDA-user: Pointer to 3d CAD? Karel Kulhavy
  - gEDA-user: Pointer to 3d CAD? Dave N6NZ
  - gEDA-user: Pointer to 3d CAD? evan foss
gEDA-user: Re: Pointer to 3d CAD? Michael Sokolov
- gEDA-user: Re: Pointer to 3d CAD? ldoolitt at recycle.lbl.gov
gEDA-user: Re: Pointer to 3d CAD? Michael Sokolov
- Vendor FPGA tools (was Re: gEDA-user: Re: Pointer to 3d CAD?) ldoolitt at recycle.lbl.gov
gEDA-user: gwave download mislinked Karel Kulhavy
gEDA-user: gwave installation failure on OpenBSD Karel Kulhavy
- gEDA-user: gwave installation failure on OpenBSD Dan McMahill
gEDA-user: Which version of guile-gtk is later? Karel Kulhavy

Last message date: Tue Oct 31 23:25:25 EST 2006
Archived on: Fri Jan 15 16:50:56 EST 2010

Messages sorted by: [ subject ] [ author ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).