gEDA-user: bypass caps

[DJ Delorie]

> > I put a copy here: http://www.delorie.com/pcb/m3a-exp-board.pcb
> 
> I looked at your board.  The 0603 position on the back of the board
> looks good.  One thing:  Why not put a couple of 10uF tantalum caps at
> strategic positions along the PWR/GND busses?

I updated the board online, adding five 10uF 0805s around the board.
One near each incoming power, two in the middle, and one at the other
end of the board.  Plus the one 10uF on the 3.3v regulator.