gEDA-dev: Next gEDA release

[Peter Clifton]

On Mon, 2007-11-26 at 19:53 -0500, Ales Hvezda wrote:
> > At the FreeDog meeting, it was mentioned that there'd be a new stable & 
> > unstable release soon(ish).
> > 
> > Is there a timescale for this actually happening?
> > 
> > *pokes Ales*
> 
> Right now I am highly time constrained.  I am hoping that once my 
> immediate time constrains are gone (by 12/13 or so), I should have
> a ton more time to work on some releases.
> 
> However, while I'm here, I've been playing with gaf master and noticed
> the following:
> 
> 1) run gschem
> 2) place a component say 7400-1.sym
> 3) Mirror the above component
> 4) save the schematic and exit gschem
> 5) launch gschem using the saved schematic and move or copy the component
> 6) save the schematic and exit gschem
> 
> Look at the schematic and notice the coords on the component are 
> incorrect.  I know this used to work.  :)

Gah, almost certainly my fault...

I see the symptom, and I know roughly where to start looking. I'll fix
it unless anyone beats me to it.

-- 
Peter Clifton

Electrical Engineering Division,
Engineering Department,
University of Cambridge,
9, JJ Thomson Avenue,
Cambridge
CB3 0FA

Tel: +44 (0)7729 980173 - (No signal in the lab!)